Setup & Installation Guide
What's Included:
- Keurig Mini coffee maker
- Water reservoir
- Power cord
- Welcome kit with K-Cup pod
- Quick start guide
Step-by-Step Setup
- Choose Location: Place on a flat, stable surface near an electrical outlet. Ensure there's at least 4 inches of clearance on all sides.
- Initial Cleaning: Before first use, run 3-4 brewing cycles with fresh water only (no K-Cup pod) to clean the internal system.
- Fill Water Reservoir: Remove reservoir, fill with fresh cold water, and reattach securely to the back of the machine.
- Power Connection: Plug the power cord into a 120V electrical outlet. The power button will illuminate.
- Prime the System: Press the power button, wait for the machine to heat up (about 3 minutes), then brew a cup without a K-Cup pod.
- Insert K-Cup Pod: Lift the handle, place your preferred K-Cup pod in the pod holder, and close the handle firmly.
- Select Cup Size: Choose your desired brew size (6oz, 8oz, or 10oz) using the button controls.
- Start Brewing: Place your mug on the drip tray and press the brew button to begin.
Specifications
| Model Series | K-Mini / K-Mini Plus |
| Type | Single Serve Coffee Maker |
| Color Options | Black, White, Red, Navy, Pink |
| Water Reservoir | Removable 12oz reservoir |
| Brew Sizes | 6oz, 8oz, 10oz (K-Mini Plus: 4oz-12oz) |
| Brew Time | Less than 2 minutes |
| Power Requirements | 120V, 60Hz, 1470W |
| Dimensions (HxWxD) | 4.5 x 12.1 x 11.3 inches |
| Weight | 4.5 lbs |
| Cord Length | 30 inches |
| Auto Off | 90 seconds after last brew |
| Compatibility | All Keurig K-Cup pods |
Warranty Information
- Limited Warranty: 1 year from date of purchase
- Coverage: Defects in materials and workmanship
- Support: Keurig customer service and authorized service centers
For warranty service, contact Keurig Customer Service at 1-866-901-2739 or visit Keurig.com
Key Features
Compact Design
Space-saving design fits anywhere - perfect for small kitchens, dorm rooms, offices, or RVs. Less than 5 inches wide.
Multi-Stream Technology
Extracts full flavor and aroma from each K-Cup pod by saturating grounds evenly for a delicious cup every time.
Removable Reservoir
12oz water reservoir removes for easy filling at the sink. No need to lift the entire machine.
Energy Efficient
Auto-off feature turns the brewer off 90 seconds after last brew to save energy. Heats water in under 3 minutes.
Brew Size Control
Choose from 6oz, 8oz, or 10oz brew sizes (K-Mini Plus offers 4oz to 12oz with adjustable settings).
Travel Mug Friendly
Removable drip tray accommodates travel mugs up to 7 inches tall, perfect for on-the-go coffee lovers.
Brewing Technology Explained
Fast Heat
Advanced heating system reaches optimal brewing temperature in under 3 minutes
Needle System
Upper and lower needles puncture K-Cup pod to inject hot water and extract coffee
Pressure Brewing
Optimal pressure extracts maximum flavor from ground coffee in K-Cup pods
Temperature Control
Maintains ideal 192°F brewing temperature throughout the brewing process
Quiet Operation
Designed for minimal noise during brewing - perfect for morning brewing
Drip Stop
Automatically stops flow when mug is removed to prevent spills and mess
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Brewer won't turn on | Power issue, not plugged in properly | Check power outlet, ensure cord is securely connected |
| No water flow | Empty reservoir, clogged needle, air lock | Refill reservoir, clean needles, prime system |
| Weak coffee | Wrong brew size, old K-Cup pod, needs descaling | Use smaller brew size, fresh pod, descale machine |
| Leaking water | Loose reservoir, clogged exit needle, overfilled | Check reservoir seal, clean exit needle, don't overfill |
| Machine not heating | Mineral buildup, heating element issue | Descale machine, contact customer service if persists |
| Error lights flashing | Various system errors | Unplug for 2 minutes, plug back in, try again |
Cleaning & Maintenance Codes
- Add Water: Red light - Refill water reservoir
- Descale: Orange light - Machine needs descaling
- Prime: Flashing power light - System needs priming
- Overheat: All lights flashing - Unplug and let cool for 30 minutes
- Needle Clog: Slow brewing - Clean exit needle with paper clip
- Pod Error: No puncture - Ensure K-Cup is properly seated
Manual Downloads
Current Model Manuals
K-Mini (K10)
Single Serve Coffee Maker
K-Mini Plus (K25)
Adjustable Brew Sizes
K-Mini Special Edition
Limited Color Options
K-Mini Essentials
Basic Model
Popular Previous Models
K15
Classic Series
K40
Elite Series
K45
Select Series
K50
Premium Series