Owners Manual for Keurig

User Manual & Brewing Guide

Single Serve Coffee Maker

Setup Guide

Before First Use:

  • Clean water reservoir
  • Rinse all removable parts
  • Have K-Cup pods ready
  • Power source nearby
  • Clean mug or cup

Step-by-Step Setup

  1. Unpack and Inspect: Remove all packaging materials and inspect the brewer for any visible damage.
  2. Place on Stable Surface: Position your Keurig brewer on a flat, stable countertop away from heat sources.
  3. Fill Water Reservoir: Remove the water reservoir, fill with fresh cold water, and reattach securely.
  4. Power Connection: Plug the brewer into a grounded 120V electrical outlet. Do not use extension cords.
  5. Prime the Brewer: Turn on the brewer and run several brew cycles without a K-Cup pod to clean the internal lines.
  6. Insert K-Cup: Lift the handle, place a K-Cup pod in the pod holder, and close the handle firmly.
  7. Select Brew Size: Choose your desired cup size (6oz, 8oz, 10oz, or 12oz) using the control buttons.
  8. Start Brewing: Place your mug on the drip tray and press the brew button to begin.
Important: Always use genuine Keurig K-Cup pods for optimal performance and to prevent damage to your brewer.

Specifications

Model Series K-Classic, K-Elite, K-Supreme
Type Single Serve Coffee Maker
Color Options Black, White, Stainless Steel, Red
Water Reservoir 40oz to 75oz (model dependent)
Brew Sizes 6oz, 8oz, 10oz, 12oz
Brew Time Under 1 minute
Power Requirements 120V, 60Hz, 1470W
Dimensions (HxWxD) 12.5 x 10.2 x 13 inches (approx)
Weight 5.5 to 8.5 lbs
Temperature Range 192°F (optimal brewing temperature)
Pressure High pressure pump system
Compatibility All Keurig K-Cup pods

Warranty Information

  • Limited Warranty: 1 year from date of purchase
  • Coverage: Defects in materials and workmanship
  • Extended Options: Available through Keurig Protection Plan

For warranty service, contact Keurig Customer Service at 1-866-901-2739 or visit Keurig.com

Key Features

One-Touch Brewing

Enjoy your favorite beverage in under a minute with simple one-touch operation. Just insert a K-Cup pod, select your size, and brew.

Multiple Brew Sizes

Choose from multiple cup sizes (6oz, 8oz, 10oz, or 12oz) to customize your drink strength and volume to your personal preference.

Large Water Reservoir

Removable 40oz to 75oz water reservoir (model dependent) allows you to brew multiple cups before refilling, perfect for families or offices.

Energy Saving Auto-Off

Automatically turns off 90 seconds after your last brew to save energy. Can be disabled if preferred for continuous operation.

Programmable Settings

Set your preferred brew temperature and strength. Some models allow you to save your favorite settings for one-touch perfection.

Hot Water on Demand

Brew hot water for tea, cocoa, or soup without a K-Cup pod. Perfect for instant meals and a variety of hot beverages.

Beverage Options

Coffee

Over 400 varieties of coffee from light to dark roast

Tea

Black, green, herbal, and chai tea options

Cocoa

Rich hot chocolate and specialty cocoa drinks

Iced Beverages

Specially designed K-Cup pods for perfect iced coffee

Specialty Drinks

Lattes, cappuccinos, and flavored coffee varieties

Hot Water

Instant hot water for oatmeal, soup, or tea bags

Troubleshooting

Problem Possible Cause Solution
Brewer won't turn on Power issue, not plugged in Check power outlet, ensure brewer is properly plugged in
No water flow Empty reservoir, clogged needle Refill water reservoir, clean exit needle with paper clip
Weak or small brew Clogged water lines, mineral buildup Descale brewer, run cleaning cycle
Leaking water Loose reservoir, damaged seal Ensure reservoir is seated properly, check seals
Error lights flashing Needs descaling, mechanical issue Descale brewer, unplug for 2 minutes then retry
K-Cup not punctured Handle not closed fully, pod obstruction Ensure handle is fully closed, check for obstructions

Common Error Messages

  • Add Water: Water reservoir is empty or not properly seated
  • Descale: Mineral buildup detected - run descaling process
  • Prime: Brewer needs priming - run water-only cycles
  • Overheat: Brewer too hot - allow to cool for 30 minutes
  • Not Ready: Brewer still heating - wait for ready light
  • Contact CS: Technical issue - contact customer service

Manual Downloads

Current Model Manuals

K-Classic K50

Single Serve Coffee Maker

K-Elite K575

Programmable Coffee Maker

K-Supreme Plus

MultiStream Technology

K-Duo Plus

Single Serve & Carafe

Popular Previous Models

K-Select K425

Compact Coffee Maker

K-Compact K35

Space Saving Design

K-15

Mini Brewer

K-250

Office Series

Note: For models not listed here, please visit the Keurig Support Website for complete documentation.