Setup & Installation Guide
Tools Needed:
- Clean measuring cup
- Fresh water
- Keurig® descaling solution
- Soft cloth
- Paper clip (for needle cleaning)
Step-by-Step Initial Setup
- Unpack and Place: Remove all packaging materials. Place brewer on a flat, stable surface away from heat sources and water splashes.
- Water Reservoir: Lift and remove water reservoir. Fill with fresh, cold water up to maximum fill line. Reinstall reservoir.
- Power Connection: Plug power cord into a grounded 120V outlet. Press power button to turn on.
- Initial Rinse: Place a large mug (12oz or more) on drip tray. Lift and close handle without K-Cup pod. Press brew button to run water through system.
- Prime System: Repeat rinse cycle 2-3 times until reservoir is empty to prime the brewing system.
- First Brew: Refill reservoir. Insert K-Cup pod, select cup size, and press brew button for your first beverage.
- Descaling Setup: Program descaling reminder for every 3-6 months based on water hardness and usage frequency.
Specifications
| Model Series | K-Classic, K-Select, K-Elite |
| Type | Single-Serve Coffee Maker |
| Color Options | Black, White, Stainless Steel, Red |
| Reservoir Capacity | 52 oz - 75 oz (varies by model) |
| Brew Sizes | 6, 8, 10, 12 oz (K-Select: 4 sizes) |
| Control Type | Button Controls with LED Display |
| Power Requirements | 120V, 60Hz, 1470W |
| Dimensions (HxWxD) | 13.3 x 10.2 x 13.0 inches |
| Weight | 9.5 lbs |
| Brew Time | Under 1 minute |
| Temperature Range | 192°F optimal brewing temperature |
| Pressure | High pressure pump system |
Warranty Information
- Limited Warranty: 1 year from date of purchase
- What's Covered: Defects in materials and workmanship
- Additional Coverage: Optional Keurig® Protection Plan available
For warranty service, contact Keurig Customer Service at 1-866-901-2739 or visit Keurig.com
Key Features
K-Cup Pod System
Brews over 400 varieties of coffee, tea, hot cocoa, and specialty beverages using patented K-Cup pods, ensuring consistent quality and freshness.
Multi-Stream Technology
Extracts full flavor and aroma from the K-Cup pod by saturating grounds evenly, delivering a perfect cup every time.
Strong Brew Button
Increases strength and boldness of your coffee by slowing the brewing process for optimal extraction (available on select models).
Programmable Auto On/Off
Set your brewer to turn on at a specific time and automatically shut off after brewing, saving energy and ensuring coffee is ready when you are.
Large Water Reservoir
Removable 52-75 oz reservoir reduces refill frequency and features an easy-fill handle and water window for level monitoring.
Hot Water on Demand
Brew hot water for tea, oatmeal, or soup without a K-Cup pod by simply lifting and closing the handle and pressing brew button.
Brew Size Options Explained
4 oz
Ideal for strong espresso-style shots or small servings
6 oz
Perfect for standard coffee cups and milder brews
8 oz
Recommended size for most K-Cup pods
10 oz
Great for travel mugs and larger servings
12 oz
Maximum size for full carafes and extra-large mugs
Strong Brew
Not a size but a setting for bolder flavor extraction
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Brewer won't turn on | Power issue, not plugged in properly | Check power outlet, ensure cord is fully inserted in brewer |
| No water flow | Empty reservoir, clogged needle, air lock | Refill reservoir, clean exit needle, prime system |
| Small cup of coffee | Mineral buildup, clogged filter | Descale brewer, clean exit needle and funnel |
| Leaking water | Overfilled reservoir, damaged seal | Don't exceed max fill line, check reservoir seal |
| Coffee tastes weak | Wrong brew size, old K-Cup pod | Use smaller brew size, check K-Cup expiration date |
| Brewer beeps repeatedly | Empty reservoir, needs descaling | Refill water, run descaling cycle if prompted |
Common Error Messages
- Add Water: Reservoir is empty or not properly seated - Refill and reseat reservoir
- Descale: Mineral buildup detected - Run descaling cycle with Keurig® descaling solution
- Prime: Air in water line - Run brew cycle without K-Cup pod until water flows steadily
- Overheat: Brewer needs to cool down - Unplug for 15 minutes, then restart
- Not Ready: Brewer still heating - Wait for ready light to illuminate
- Clogged: Exit needle blocked - Turn off, unplug, and clean exit needle with paper clip
Manual Downloads
Current Model Manuals
K-Classic K50
Single Serve Coffee Maker
K-Select K150
Multi-Size Brewer
K-Elite K155
Premium Single Serve
K-Slim K45
Slim Design Brewer
Popular Previous Models
K40 Essential
Basic Single Serve
K250
Multi-Serve Brewer
K350
Advanced Single Serve
K450
Programmable Brewer