Installation Guide
Tools Needed:
- Clean cloth
- Measuring cup
- Fresh water
- Keurig® descaling solution
- Paper towels
Step-by-Step Setup
- Unpack and Inspect: Remove all packaging materials and inspect the coffee maker for any visible damage.
- Place on Level Surface: Place the brewer on a clean, level, and stable countertop away from heat sources and water splashes.
- Initial Cleaning: Wipe the exterior with a damp cloth and clean the water reservoir with mild soap and water.
- Water Reservoir Installation: Fill the removable water reservoir with fresh, cold water and place it securely on the brewer.
- Power Connection: Plug the brewer into a properly grounded 120V, 60Hz outlet. Do not use an extension cord.
- Initial Brewing Cycle: Run several brewing cycles with just water (no K-Cup® pod) to clean the internal system.
- First Coffee Brew: Insert a K-Cup® pod, select your cup size, and brew your first cup of coffee.
Specifications
| Model Series | K-Elite / K-Classic / K-Select |
| Type | Single Serve Coffee Maker |
| Color Options | Black / White / Stainless Steel |
| Water Reservoir Capacity | 75 oz / 2.2L |
| Brew Sizes | 4 oz, 6 oz, 8 oz, 10 oz, 12 oz |
| Control Type | Button Controls with LED Display |
| Power Requirements | 120V, 60Hz, 1470W |
| Dimensions (HxWxD) | 13.2 x 10.1 x 13.0 inches |
| Weight | 8.6 lbs |
| Brew Time | Under 1 minute |
| Temperature Range | 187°F - 192°F |
| Energy Saving Mode | Auto-off after 2 hours |
Warranty Information
- Limited Warranty: 1 year from date of purchase
- What's Covered: Defects in materials and workmanship
- Additional Coverage: Optional Keurig® Protection Plan available
For warranty service, contact Keurig Customer Service at 1-866-901-2739 or visit Keurig.com
Key Features
Keurig® Brewing Technology
Advanced brewing technology that uses pressure and precise temperature control to extract the full flavor and aroma from every K-Cup® pod.
Multiple Brew Sizes
Choose from 4 different cup sizes (4oz, 6oz, 8oz, 10oz, 12oz) to customize your coffee strength and serving size according to your preference.
Strong Brew Option
For those who prefer a bolder, more intense coffee flavor, the Strong Brew setting extracts more flavor from each K-Cup® pod.
Iced Coffee Setting
Special iced coffee setting brews a stronger, more concentrated coffee that won't get watered down when poured over ice.
Programmable Auto On/Off
Set your brewer to turn on at a specific time so your coffee is ready when you wake up, with auto-off feature to save energy.
Hot Water Dispenser
Dispense hot water for tea, hot chocolate, oatmeal, or soup without using a K-Cup® pod, providing added versatility.
Brewing Technology Explained
Needle Piercing
Upper and lower needles pierce the K-Cup® pod to inject hot water and extract coffee
Pressure Brewing
Optimal pressure ensures complete saturation and full flavor extraction
Temperature Control
Precise temperature maintenance between 187°F - 192°F for ideal extraction
Flow Regulation
Controlled water flow rate for consistent brewing across all cup sizes
Basket Design
Optimized brewing chamber design for maximum flavor extraction
Filtration System
Built-in water filter compatibility for better tasting coffee
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Brewer won't turn on | Power issue, not plugged in properly | Check power outlet, ensure plug is secure, check circuit breaker |
| No water flow | Empty water reservoir, clogged needle, air lock | Refill reservoir, clean exit needle, prime the pump |
| Weak coffee | Wrong brew size, clogged needle, needs descaling | Select smaller cup size, clean needles, run descaling cycle |
| Leaking water | Overfilled reservoir, damaged seal, clogged drain | Don't overfill, check reservoir seal, clean drain area |
| Error lights flashing | Needs descaling, overheating, mechanical issue | Run descaling cycle, let cool for 1 hour, contact support |
| K-Cup® not punctured | Clogged entry needle, misaligned pod | Clean entry needle, ensure pod is properly seated |
Error Codes & Lights
- Add Water: Water reservoir is empty or not properly seated
- Descale: Mineral buildup detected - run descaling cycle
- Overheating: Brewer needs to cool down - wait 1 hour
- Prime: Air in water line - run several water-only cycles
- Not Brewing: Check pod placement and needle cleanliness
- Power Issues: Check electrical connection and outlet
Manual Downloads
Current Model Manuals
K-Elite
Single Serve Coffee Maker
K-Classic
Essential Coffee Maker
K-Select
Customizable Coffee Maker
K-Duo
Single Serve & Carafe
Popular Previous Models
K-Compact
Space Saving Brewer
K-15
Basic Single Serve
K-50
Programmable Brewer
K-200
Office Series