Keurig Slim Coffee Maker Manual

The Keurig Slim Coffee Maker is a compact single-serve brewer designed for home or office use, featuring a removable drip tray, descale alert, multiple cup sizes, energy-saving auto-off, and compatibility with most K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Water reservoir, K-Cup pod holder, Drip tray, Power button, Cup size buttons, Descaling indicator.

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

1. Remove packaging materials and stickers.
2. Place brewer on counter away from heat sources and sinks.
3. Wash removable parts (reservoir, drip tray) with warm soapy water.
4. Fill water reservoir with fresh cold water and insert into brewer.
5. Plug into grounded 120V outlet.

WARNING! Do not use without water. Ensure drip tray is in place before brewing.

First-Time Use

Prime the system before first brew.

1. Power on: Press POWER button; lights will illuminate.
2. Prime: Without K-Cup, place mug, press 10oz brew button to run water through system.
3. Repeat priming cycle 2-3 times to clear air from lines.
4. Insert K-Cup: Lift handle, place pod, close firmly.
5. Select cup size and brew your first coffee.

CAUTION! Water will be hot. Keep hands clear during brew cycle.

Specifications

• Model: Keurig Slim Single-Serve Brewer
• Water Capacity: 48 oz removable reservoir
• Brew Sizes: 6oz, 8oz, 10oz
• Power: 120V AC, 60Hz, 1500W
• Brew Time: Under 1 minute per cup
• Dimensions: 12.5" H x 9.5" W x 11.5" D
• Weight: 7.5 lbs
• Compatibility: Most K-Cup pods; reusable My K-Cup filter available
• Warranty: 1-year limited

Controls and Settings

Front panel: POWER button, 6oz/8oz/10oz brew buttons, Descaling indicator light.

Operation: Press POWER to turn on (blue light). Select cup size button to brew. Lights flash during heating/brewing.

Auto-Off: Brewer turns off automatically after 2 hours of inactivity. Press POWER to wake.

Descaling Alert: Red light indicates need for descaling. Follow descaling procedure.

Brewing Coffee

Steps for perfect single-serve coffee.

1. Ensure brewer is on and water reservoir is filled.
2. Lift handle to open K-Cup chamber.
3. Insert K-Cup pod (or reusable filter with ground coffee).
4. Close handle firmly until it clicks.
5. Place mug on drip tray (adjust height if needed).
6. Press desired cup size button (6oz, 8oz, 10oz).
7. Brewing begins; cycle completes in under 1 minute.
8. Remove mug and enjoy.

Tip: For stronger coffee, use 6oz setting with regular K-Cup.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Remove and wash drip tray, K-Cup holder, and water reservoir.
3. Monthly: Run vinegar solution or Keurig cleaning kit through empty cycle.
4. As needed: Descale when indicator light activates.

CAUTION! Unplug before cleaning. Never immerse brewer in water.

Descaling

Mineral buildup affects performance. Descale every 3-6 months.

1. Empty water reservoir and fill with descaling solution or white vinegar.
2. Place large mug on drip tray.
3. Press and hold 6oz and 10oz buttons for 3 seconds to enter descale mode.
4. Press brew button repeatedly to run solution through system.
5. Rinse by filling reservoir with fresh water and running multiple brew cycles.
6. Descale light turns off when complete.

WARNING! Use only Keurig descaling solution or vinegar. Rinse thoroughly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. UL listed for safety. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 1 minute, then restart.

Service: 1-866-901-2739; www.keurig.com