Keurig Owners Manual K Select

The Keurig K-Select is a single-serve coffee maker designed for home use, featuring multiple brew sizes (6, 8, 10, 12 oz), a 48 oz removable water reservoir, energy-saving auto-off, a descale indicator, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brew chamber, Removable water reservoir, Drip tray, Control panel, Power button, Brew size buttons.

Installation & Setup

Unpack and inspect contents. Place on clean, level surface.

1. Remove packaging materials from brewer and water reservoir.
2. Wash water reservoir with warm, soapy water; rinse thoroughly.
3. Place drip tray in position; adjust height if using tall mug.
4. Fill reservoir with fresh cold water; insert into brewer.
5. Plug power cord into 120V AC outlet.

WARNING! Do not use without water. Ensure brewer is on stable surface away from edges.

First-Time Use

Prime the brewing system before first brew.

1. Power on: Press POWER button; lights will illuminate.
2. Prime: Without K-Cup pod, place mug on drip tray, press 12 oz brew button to run water through system.
3. Repeat priming cycle 2-3 times to flush internal lines.
4. Insert K-Cup pod, select desired brew size, and brew first cup.

CAUTION! Water will be hot. Keep hands clear during brewing cycle.

Specifications

• Dimensions: 13.0" H x 9.8" W x 13.3" D.
• Weight: 7.5 lbs.
• Water Reservoir: 48 oz removable.
• Brew Sizes: 6, 8, 10, 12 oz.
• Power: 120V AC, 60Hz, 1470W.
• Brew Time: Under 1 minute per cup.
• Compatibility: All K-Cup pods.
• Warranty: 1-year limited.

Controls and Settings

Control Panel: POWER, 6oz, 8oz, 10oz, 12oz buttons, optional STRENGTH control.

Operation: Press POWER to turn on; select brew size; press brew button to start. Auto-off activates after 2 hours of inactivity.

Settings: Brew temperature is preset; descale indicator light alerts when maintenance required. Strength control (if equipped) increases brew intensity.

Brewing Coffee

Follow steps for optimal brewing.

1. Power on brewer; wait for ready light.
2. Lift handle, insert K-Cup pod, close handle firmly.
3. Place mug on drip tray.
4. Press desired brew size button (6, 8, 10, 12 oz).
5. Brewing begins automatically; completes in under 1 minute.
6. Remove mug; brewer is ready for next cup.

Tip: For stronger coffee, use STRENGTH button or smaller brew size.

Maintenance & Cleaning

Regular cleaning ensures performance and longevity.

1. Daily: Wipe exterior with damp cloth; empty drip tray and used pod holder.
2. Weekly: Remove and wash water reservoir, drip tray, and pod holder in warm, soapy water.
3. Monthly: Clean needle that pierces K-Cup pod with paperclip to prevent clogs.

CAUTION! Unplug before cleaning. Do not immerse brewer in water.

Descaling Procedure

Descale when indicator light illuminates or every 3-6 months.

1. Fill reservoir with descaling solution or white vinegar/water mix.
2. Place large mug or container on drip tray.
3. Press POWER, then 12 oz brew button repeatedly until reservoir is empty.
4. Rinse reservoir; refill with fresh water; repeat brewing cycles to rinse system.
5. Repeat rinse cycle 2-3 times to remove all descaling solution.

WARNING! Use only Keurig descaling solution or approved alternatives.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com