Keurig My K Cup Manual

The Keurig My K Cup is a reusable coffee filter designed for use with compatible Keurig single-serve brewers, allowing you to brew your own ground coffee, tea, or other beverages. It features a durable plastic construction, removable mesh filter, easy-fill design, and compatibility with most Keurig models (check compatibility list). Below are key sections for safety, features, installation, setup, operation, cleaning, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using with Keurig Brewer 7. Brewing Coffee 8. Cleaning & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Reusable filter cup, Removable mesh filter, Lid, Compatibility ring (if included).

Feature	Description
Reusable filter cup	Durable plastic chamber for holding ground coffee
Removable mesh filter	Fine mesh to contain grounds while allowing water flow
Lid	Snap-on lid to secure contents during brewing
Compatibility ring	Adapter for certain Keurig models (check model list)
Easy-fill design	Wide opening for adding ground coffee
BPA-free materials	Safe for food contact
Dishwasher safe	Top rack dishwasher safe for easy cleaning
Brew size compatibility	Works with various cup sizes (6oz, 8oz, 10oz)
Universal fit	Designed for most Keurig single-serve brewers
Cost-effective	Reduces waste from disposable K-Cup pods

Installation

Unpack and inspect contents. Ensure compatibility with your Keurig brewer model.

Remove any packaging materials from the My K Cup components.
If your model requires a compatibility ring, attach it to the bottom of the My K Cup.
Insert the removable mesh filter into the cup.
Ensure the lid is clean and ready for use.

WARNING! Do not use with incompatible Keurig models. Check manufacturer's compatibility list.

First-Time Setup

Before first use, clean all components thoroughly.

Wash all parts: Use warm soapy water or place on top rack of dishwasher.
Rinse thoroughly and allow to dry completely.
Insert mesh filter into the cup until it snaps into place.
Test fit in your Keurig brewer without coffee to ensure proper seating.

CAUTION! Ensure all parts are completely dry before first use to prevent moisture issues.

Specifications

Material: BPA-free plastic, stainless steel mesh.
Capacity: Holds up to 2 tablespoons of ground coffee (adjustable).
Compatibility: Most Keurig single-serve brewers (check specific models).
Brew Sizes: Compatible with 6oz, 8oz, and 10oz settings.
Cleaning: Dishwasher safe (top rack recommended).
Dimensions: Standard K-Cup size for brewer compatibility.
Weight: Approximately 2 ounces.
Color: Typically black with clear lid.

Controls and Settings

The My K Cup works with your Keurig brewer's existing controls. No additional settings required on the cup itself.

Brewer Controls: POWER, CUP SIZE (6oz, 8oz, 10oz), BREW button.

For optimal results: Use medium grind coffee, fill to appropriate level (do not overfill), ensure lid is securely snapped, select correct cup size on brewer, use fresh cold water in reservoir.

Using with Keurig Brewer

Insert My K Cup into your Keurig brewer like a regular K-Cup pod.

Ensure brewer is turned on and ready.
Open brewer handle/lid fully.
Place empty My K Cup in the pod holder (no need to puncture).
Close handle/lid firmly until it locks.
Select desired cup size on brewer.
Place mug on drip tray.
Press BREW button to start cycle.

Tip: Always use a mug that matches or exceeds your selected brew size.

Brewing Coffee

Steps for brewing with ground coffee.

Remove My K Cup from brewer.
Separate lid from cup.
Add ground coffee: Fill with 1-2 tablespoons (adjust to taste).
Do not overfill: Leave 1/4 inch space at top.
Snap lid securely onto cup.
Insert filled My K Cup into brewer.
Close handle/lid firmly.
Select cup size (6oz for stronger, 10oz for milder).
Press BREW button.
After brewing, wait 30 seconds before removing cup (hot!).
Discard used grounds and rinse cup.

WARNING! Cup will be hot after brewing. Allow to cool before handling.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and taste.

After each use: Remove and discard grounds.
Rinse all parts with warm water.
Weekly deep clean: Wash with mild soap or dishwasher (top rack).
Check mesh filter for clogs; use soft brush if needed.
Ensure all parts are completely dry before storage.
Store disassembled to prevent moisture buildup.

CAUTION! Do not use abrasive cleaners or scrubbers that could damage mesh.

Regulatory Information

Manufactured to food-safe standards. BPA-free materials. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. Compatible with most Keurig brewers but not all models; check compatibility list. Not for use with Keurig 2.0 models that use DRM technology unless specifically indicated.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Water leaks during brewing	Lid not secure/overfilled	Ensure lid snaps firmly; reduce coffee amount.
Weak coffee	Too little coffee/coarse grind	Increase coffee amount; use finer grind.
Brewer doesn't start	My K Cup not seated properly	Remove and reinsert; ensure handle closes fully.
Grounds in coffee	Damaged mesh filter	Inspect filter for holes; replace if damaged.
Brew too slow	Fine grind/old grounds	Use medium grind; clean filter thoroughly.
Bitter taste	Over-extraction	Use coarser grind; reduce brew size.
My K Cup stuck	Grounds expanded	Allow to cool; gently twist while pulling out.
Not compatible	Wrong Keurig model	Check compatibility list for your brewer.

Reset: Remove My K Cup, run water-only brew cycle to clear any grounds.

Service: 1-866-901-2739; www.keurig.com