Keurig Model K40 Manual

The Keurig Model K40 is a single-serve coffee brewing system designed for home use, featuring a removable drip tray, programmable settings, a 48-ounce water reservoir, and compatibility with K-Cup pods. It offers multiple cup sizes, a descaling function, and an energy-saving auto-off feature. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brewer with water reservoir, Removable drip tray, Power cord, K-Cup pod holder, Control panel with buttons and display.

Feature	Description
Water Reservoir	48-ounce removable tank with handle
Brew Sizes	6 oz, 8 oz, 10 oz programmable options
K-Cup Holder	Holds most K-Cup pod varieties
Removable Drip Tray	Accommodates travel mugs up to 7.2 inches
Control Panel	LCD display with brew size buttons, power, and descale indicator
Auto-Off	Energy-saving feature turns brewer off after 90 seconds
Descale Indicator	Light alerts when descaling is needed
Power Button	Turns brewer on/off
Brew Button	Starts brewing cycle

Installation & Setup

Unpack and inspect contents. Place on clean, level surface.

Remove packaging materials from brewer and reservoir.
Fill water reservoir: Remove, fill with fresh cold water, and reattach.
Plug into 120V AC outlet.
Place a mug on drip tray.

WARNING! Do not use without water. Ensure brewer is on a stable, heat-resistant surface away from edges.

First-Time Use

Prime the brewer before first brew.

Power on: Press POWER button; display will light.
Prime system: Without a K-Cup, place mug, press 10 oz brew button. Repeat 3 times.
Insert K-Cup: Lift handle, place K-Cup in holder, close firmly.
Select brew size: Press 6 oz, 8 oz, or 10 oz button.
Start brew: Press BREW button; cycle completes in under a minute.

CAUTION! Water and brewed coffee are hot. Avoid contact with steam.

Specifications

Dimensions: 13.5" H x 10.2" W x 13.2" D.
Water Reservoir: 48 oz removable.
Power: 120V AC, 60Hz, 1470W.
Brew Sizes: 6 oz, 8 oz, 10 oz (programmable).
Compatibility: Most K-Cup pods.
Auto-Off: 90 seconds (default).
Warranty: 1-year limited.
Weight: 8.5 lbs.

Controls and Settings

Control Panel: POWER button, BREW button, 6 oz, 8 oz, 10 oz buttons, LCD display, DESCALING indicator light.

Programming Brew Sizes: Press and hold desired brew size button until light flashes. Brew to desired volume, then press same button to save.

Auto-Off: Brewer turns off 90 seconds after last brew. To disable, press and hold POWER for 3 seconds (display shows "ON"). To re-enable, repeat.

Descale Indicator: Flashing light signals need for descaling.

Brewing Coffee

Brews one cup at a time using K-Cup pods.

Power on brewer; ensure water reservoir is filled.
Lift handle, insert K-Cup, close handle firmly.
Place mug on drip tray.
Select brew size (6 oz, 8 oz, 10 oz).
Press BREW button; brewing begins immediately.
When done, lift handle to eject used K-Cup.

Tip: For stronger coffee, use smaller brew size with same K-Cup.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

Exterior: Wipe with damp cloth; do not immerse in water.
Drip tray & pod holder: Remove and wash with warm, soapy water weekly.
Water reservoir: Remove, wash with mild detergent, rinse thoroughly.
Needle: Use paper clip to clear any pod residue (unplug first).

CAUTION! Unplug brewer before cleaning. Never use abrasive cleaners.

Descaling Procedure

Descale every 3-6 months or when indicator lights.

Fill reservoir with 16 oz white vinegar and 16 oz water.
Place large mug (at least 20 oz) on drip tray.
Press and hold 6 oz and 10 oz buttons for 3 seconds; "DESCALE" appears.
Press BREW; repeat until "ADD WATER" appears.
Rinse: Fill reservoir with fresh water, brew repeatedly (no K-Cup) until vinegar smell is gone.

WARNING! Use only vinegar or Keurig descaling solution. Do not drink descaling solution.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	No power	Check outlet; ensure plug is secure; try different outlet.
No water flow	Empty reservoir/clog	Fill reservoir; descale; check for kinks in internal tubing.
Brew is too weak	Brew size setting	Use smaller brew size; ensure K-Cup is properly pierced.
Leaking water	Loose reservoir	Ensure reservoir is fully seated; check seals for damage.
Descale light flashing	Mineral buildup	Perform descaling procedure.
Brew stops mid-cycle	Overheating	Unplug, wait 1 hour, plug back in; ensure vents are clear.

Reset: Unplug for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com