Keurig Model K26 Manual

The Keurig Model K26 is a single-serve coffee brewing system designed for home use, featuring a 48-ounce removable water reservoir, multiple brew sizes (6, 8, 10 oz), energy-saving auto-off function, descale indicator, removable drip tray for tall travel mugs, and compatibility with all K-Cup pod varieties. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brew chamber, Removable water reservoir, Control panel, Drip tray, Power base, K-Cup pod holder.

Feature	Description
Water Reservoir	48-ounce removable tank with handle
Brew Sizes	6 oz, 8 oz, 10 oz programmable options
Auto-Off	Energy-saving shutoff after 2 hours idle
Descale Indicator	Light alerts when descaling is needed
Drip Tray	Removable for tall travel mugs (up to 7.2")
Brew Temperature	192°F optimal brewing temperature
Power Button	Turns brewer on/off
Brew Button	Starts brewing cycle
Size Select Button	Cycles through brew size options
Descale Indicator Light	Alerts when maintenance is required

Installation & Setup

Unpack and inspect contents. Place on clean, level surface.

Remove packaging materials from brewer and components.
Wash water reservoir: Remove and rinse with warm water.
Fill reservoir: Place back on brewer and fill with fresh water.
Plug into 120V AC outlet.
Prime brewer: Run water-only brew cycles (no K-Cup) to flush system.

WARNING! Do not use brewer without water. Keep away from heat sources and moisture.

First-Time Use

Power on brewer; follow priming procedure.

Power on: Press POWER button; wait for ready light.
Prime system: Place mug, press BREW without K-Cup; repeat 3 times.
Select brew size: Press SIZE button to choose 6, 8, or 10 oz.
Insert K-Cup: Lift handle, place K-Cup, close firmly.
Brew: Press BREW button; cycle completes in under 1 minute.

CAUTION! Brewer and water will be hot. Keep hands clear during brew cycle.

Specifications

Model: K26 Single Serve Brewer
Water Capacity: 48 oz removable reservoir
Brew Sizes: 6 oz, 8 oz, 10 oz
Power: 120V AC, 60Hz, 1470W
Brew Time: Under 1 minute per cup
Temperature: 192°F optimal brew temperature
Dimensions: 13.3" H x 10.2" W x 13.1" D
Weight: 7.5 lbs
Compatibility: All K-Cup pod varieties
Warranty: 1-year limited

Controls and Settings

Control Panel: POWER button, BREW button, SIZE button, Descale Indicator Light.

Operation: POWER turns brewer on/off. SIZE cycles through brew volumes. BREW starts brewing cycle. Descale light illuminates when system needs cleaning.

Settings: Brew size memory retains last selection. Auto-off activates after 2 hours of inactivity. Water filter compatible (optional).

Brewing Coffee

Supports all K-Cup pod varieties including coffee, tea, hot cocoa.

Ensure brewer is on and ready light is illuminated.
Place mug on drip tray.
Lift handle, insert K-Cup pod, close handle firmly.
Select brew size (6, 8, or 10 oz) using SIZE button.
Press BREW button; brewing begins immediately.
Wait for cycle to complete; discard used pod.
For another cup, repeat steps 2-6.

Tip: Preheat mug with hot water for hotter coffee. Use filtered water for better taste.

Maintenance & Cleaning

Daily: Wipe exterior with damp cloth. Weekly: Clean water reservoir and drip tray.

Unplug brewer before cleaning.
Remove and wash water reservoir with warm, soapy water.
Clean drip tray and removable parts.
Wipe brew chamber with damp cloth (do not immerse).
Descale every 3-6 months depending on water hardness.

CAUTION! Never immerse brewer in water. Use only mild detergent.

Descaling Procedure

Required when descale indicator lights or every 3-6 months.

Fill reservoir with descaling solution or white vinegar/water mix.
Place large mug (at least 20 oz) on drip tray.
Press POWER and BREW buttons simultaneously for 3 seconds.
Press BREW to start descale cycle; repeat until reservoir empty.
Rinse reservoir, fill with fresh water, run multiple water-only cycles.
Descale light turns off when process complete.

WARNING! Follow descaling instructions carefully to prevent damage.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check power cord; ensure outlet works; press POWER firmly.
No water flow	Empty reservoir/clog	Fill reservoir; check for clogs; run cleaning needle through exit needle.
Coffee too weak	Brew size setting	Select smaller brew size; use stronger K-Cup variety.
Descale light on	Mineral buildup	Perform descaling procedure immediately.
Leaking water	Improper K-Cup placement	Ensure K-Cup properly seated; handle fully closed.
Brewer stops mid-cycle	Overheating	Unplug for 30 minutes; ensure vents not blocked.

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com