Keurig Model K10 User Manual

The Keurig Model K10 is a single-serve coffee brewing system designed for home or office use. It features a compact design, one-touch brewing, multiple cup size options, a removable drip tray, a water reservoir, and compatibility with K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Brewing unit, Water Reservoir, Drip Tray, Power Button, Cup Size Buttons, Power Cord, K-Cup Pod Holder.

Feature	Description
Water Reservoir	Removable tank for easy filling and cleaning
Brew Size Selection	Buttons for 6 oz, 8 oz, and 10 oz cup sizes
Power Button	Turns the brewer on/off
Removable Drip Tray	Accommodates travel mugs; easy to clean
K-Cup Pod Holder	Holds K-Cup pod during brewing; opens for insertion/removal
Indicator Lights	Shows power status and heating/ready state
Auto-Off	Automatically turns off after 2 hours of inactivity
Descale Indicator	Light alerts when descaling is needed
Compact Design	Fits easily on countertops
Power Cord Storage	Wrap-around cord management

Installation & Setup

Unpack and inspect all contents. Place brewer on a stable, level, and dry surface.

Remove all packaging materials and stickers.
Wash the removable water reservoir and drip tray with warm, soapy water. Rinse and dry.
Place the drip tray in position.
Fill the water reservoir with fresh, cold water and reattach it to the brewer.
Plug the power cord into a standard 120V AC outlet.

WARNING! Do not use the brewer without water in the reservoir. Ensure the brewer is placed away from heat sources and edges.

First-Time Use

Prime the brewing system before first use.

Press the POWER button to turn the brewer on. The indicator light will blink while heating.
When the light turns solid, the brewer is ready.
Without a K-Cup pod, place a mug on the drip tray, lower the handle, and press the 10 oz brew button to run water through the system. Repeat 2-3 times.
The brewer is now ready for normal use.

CAUTION! The water and brewed beverage will be hot. Handle with care.

Specifications

Model: K10 Single Serve Brewer.
Power: 120V AC, 60Hz, 1470W.
Water Reservoir Capacity: 48 oz.
Brew Sizes: 6 oz, 8 oz, 10 oz.
Brew Time: Under 1 minute.
Dimensions: Approximately 13.5" H x 10.5" W x 13.2" D.
Weight: 7.5 lbs.
Compatibility: Uses licensed K-Cup pods.
Warranty: 1-Year Limited Warranty.

Controls and Indicators

Front Panel: POWER button, 6 oz, 8 oz, and 10 oz brew buttons, Power/Ready indicator light, Descale indicator light.

Operation: Press POWER to turn on. Indicator blinks during heating, becomes solid when ready. Select brew size after inserting a K-Cup pod. The descale light will illuminate when mineral buildup requires attention.

Auto-Off: Brewer automatically powers down 2 hours after last brew to save energy.

Brewing Coffee

Brews one cup at a time using a K-Cup pod.

Ensure brewer is on and ready (solid light).
Lift the handle to open the K-Cup holder.
Insert a K-Cup pod. Close the handle firmly.
Place a mug (up to 7 inches tall) on the drip tray.
Press the desired brew size button (6 oz, 8 oz, or 10 oz). Brewing will begin.
When brewing is complete, lift the handle to eject the used pod into the storage compartment (if equipped) or remove it manually.

Tip: For a stronger brew, select a smaller cup size. Run a water-only brew cycle to clean between different coffee varieties.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and taste.

Daily: Wipe exterior with a damp cloth. Empty the drip tray and used pod holder.
Weekly: Remove and wash the water reservoir and drip tray in warm, soapy water. Rinse thoroughly.
Monthly: Clean the needle that pierces the K-Cup pod. Unplug brewer, lift handle, and use a paperclip to gently clear any coffee grounds from the exit needle.

WARNING! Always unplug the brewer before cleaning any part except the removable reservoir and drip tray. Never immerse the brewer base in water.

Descaling

Mineral buildup from water affects performance. Descale when the indicator light illuminates or every 3-6 months.

Purchase Keurig Descaling Solution or use a vinegar-water mix (1:1).
Fill the water reservoir with the descaling solution.
Place a large mug on the drip tray.
Press POWER, then press and hold the 10 oz and 8 oz buttons for 3 seconds to enter descale mode.
Run multiple brew cycles (without a K-Cup) until the reservoir is empty.
Rinse thoroughly by filling the reservoir with fresh water and running several brew cycles to flush the system.

CAUTION! Follow descaling instructions precisely. Rinse thoroughly to remove all cleaning solution taste.

Care & Storage

Unplug and allow to cool before storage. Store in a dry place. Empty water reservoir completely.

CAUTION! Do not use abrasive cleaners or scouring pads. Do not store with water in the reservoir.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL Listed. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Check power cord connection; ensure outlet is working.
No water flow / small cup	Clogged needle or descaling needed	Clean exit needle with paperclip; run descaling procedure.
Water leaks	Reservoir not seated properly	Remove and reattach reservoir; check for cracks.
Coffee not hot enough	Cold mug, need to prime	Preheat mug with hot water; run a water-only brew cycle first.
Descale light is on	Mineral buildup	Perform descaling procedure as outlined in Section 9.
Brewer stops mid-cycle	Overheating, low water	Unplug for 15 minutes to reset; refill water reservoir.

Reset: Unplug brewer for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com