Keurig Model K Mini Plus Manual

The Keurig K-Mini Plus is a compact single-serve coffee maker designed for small spaces. It features a 12oz reservoir, multi-stream technology for optimal extraction, strong brew setting, removable drip tray for travel mugs, energy-saving auto-off, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Compact brewer body, Removable drip tray, Water reservoir, Power button, Brew button, Strong button, Power cord.

Installation & Setup

Unpack and inspect contents. Place on clean, level surface.

1. Remove packaging materials and stickers.
2. Wash removable parts: Drip tray and reservoir with warm, soapy water.
3. Place brewer on stable, dry surface away from heat sources.
4. Plug power cord into 120V outlet.

WARNING! Do not use without water. Ensure drip tray is properly installed.

First-Time Use

Prime the brewer before first use.

1. Fill reservoir with fresh cold water.
2. Place a mug on drip tray.
3. Press POWER button to turn on (light will blink).
4. Lift and close handle without inserting K-Cup pod.
5. Press BREW button to run water through system.
6. Repeat process 2-3 times to prime.

CAUTION! Water will be hot. Keep hands clear during brew cycle.

Specifications

• Dimensions: 4.5" W x 12.1" H x 11.3" D.
• Weight: 4.2 lbs.
• Water Reservoir: 12 oz removable.
• Power: 120V AC, 60Hz, 1470W.
• Cord Length: 30 inches.
• Brew Sizes: 6, 8, 10, 12 oz.
• Compatibility: All K-Cup pods.
• Auto-Off: 90 seconds after last brew.
• Warranty: 1-year limited.

Controls and Settings

Front panel: POWER button (on/off), BREW button (starts cycle), STRONG button (bold brew).

Indicator Lights: Power light (solid when on, blinking when heating), Strong light (on when strong brew selected).

Brew Size Selection: Press and hold BREW button during cycle to adjust output. Release at desired amount (6-12 oz). Strong Brew: Press STRONG button before brewing for bolder coffee. Auto-Off: Brewer turns off 90 seconds after last use to save energy.

Brewing Coffee

Follow these steps for perfect coffee every time.

1. Press POWER to turn on (light blinks, then solid when ready).
2. Fill reservoir with fresh cold water.
3. Place mug on drip tray.
4. Lift handle, insert K-Cup pod, close handle firmly.
5. For strong brew, press STRONG button (light turns on).
6. Press BREW button to start cycle.
7. Brewing completes automatically.
8. Remove mug and enjoy.

Tip: Use filtered water for better tasting coffee and to reduce mineral buildup.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

1. Unplug brewer and let cool completely.
2. Remove and wash drip tray and reservoir with warm, soapy water weekly.
3. Wipe exterior with damp cloth; do not immerse in water.
4. Clean needle: Use paper clip to clear clogged entry needle (unplug first).
5. Descale every 3-6 months depending on water hardness.

WARNING! Never use sharp objects inside brewer except recommended cleaning tool.

Descaling

Mineral buildup affects performance. Use Keurig Descaling Solution or vinegar.

1. Empty water reservoir.
2. Fill with descaling solution or equal parts white vinegar and water.
3. Place large mug on drip tray.
4. Run brew cycles without K-Cup until reservoir is empty.
5. Rinse by filling with fresh water and running multiple brew cycles.
6. Repeat rinse until vinegar smell is gone.

CAUTION! Descaling solution/vinegar is not for consumption. Rinse thoroughly.

Care Instructions

Unplug when not in use for extended periods. Store in dry place.

CAUTION! Do not use abrasive cleaners. Never immerse brewer in water.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. UL listed. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 10 seconds, then plug back in.

Service: 1-866-901-2739; www.keurig.com