Keurig Model K-Elite K90 Manual

The Keurig K-Elite K90 is a single-serve coffee maker featuring a 75 oz. water reservoir, Strong Brew option, Iced setting, programmable auto on/off, hot water on demand, brew size control (4, 6, 8, 10, 12 oz.), descale indicator, removable drip tray for travel mugs, and energy saving mode. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 75 oz. removable water reservoir, LCD display, brew size buttons, Strong Brew button, Iced button, Hot Water on Demand, programmable clock, descale indicator, removable drip tray.

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

1. Remove packaging materials and stickers.
2. Wash removable parts: reservoir and drip tray with warm, soapy water.
3. Fill reservoir with fresh cold water and place back on brewer.
4. Plug into 120V AC outlet.
5. Prime the system: Run water through without a K-Cup pod.

WARNING! Do not use without water. Ensure brewer is on a heat-resistant surface away from edges.

First-Time Use

Power on brewer; follow initial setup prompts.

1. Set time: Use HOUR and MIN buttons to set clock.
2. Program auto on: Set desired brew time for automatic start.
3. Select default brew size: Press preferred size button (8 oz. default).
4. Prime brewing system: Brew a full reservoir of water without a K-Cup.
5. Insert K-Cup: Lift handle, place pod, close firmly.
6. Brew first cup: Place mug, select size, press BREW.

CAUTION! Hot surfaces. Avoid contact during and after brewing.

Specifications

• Model: K-Elite K90
• Water Reservoir: 75 oz. removable
• Brew Sizes: 4, 6, 8, 10, 12 oz.
• Power: 120V AC, 60Hz, 1470W
• Dimensions: 13.0" H x 9.8" W x 13.3" D
• Weight: 8.2 lbs
• Cord Length: 30 inches
• Special Features: Strong Brew, Iced, Hot Water on Demand
• Warranty: 1 year limited

Controls and Settings

Front Panel: POWER, BREW, 4/6/8/10/12 oz. buttons, STRONG, ICED, HOT WATER.

LCD Display: Shows time, auto on/off status, descale alert, brew size selected.

Settings Menu: Press MENU to access: - Clock Set: Adjust time. - Auto On: Set automatic brew time. - Auto Off: Set delay (0-2 hrs). - Brightness: Adjust display brightness. - Factory Reset: Restore default settings.

Brewing Coffee

Brews using K-Cup pods.

1. Ensure reservoir is filled with water.
2. Lift handle, insert K-Cup, close handle firmly.
3. Place mug on drip tray.
4. Select brew size: Press 4, 6, 8, 10, or 12 oz.
5. Optional: Press STRONG for bolder coffee.
6. Press BREW to start.
7. Brewing completes automatically.
8. Remove mug and discard used pod.

Tip: Preheat mug with hot water for hotter coffee.

Special Functions

Strong Brew: Press before brewing for slower extraction and stronger flavor.

Iced Coffee: Press ICED, then brew size. Uses less water to account for ice melting.

Hot Water on Demand: Press HOT WATER, then size. Dispenses hot water without pod.

Programmable Auto On: Set time for brewer to turn on and brew automatically.

Energy Saving Mode: Auto off after 2 hours of inactivity (adjustable).

Cleaning & Maintenance

Daily: Wipe exterior with damp cloth. Weekly: Wash reservoir and drip tray.

1. Descaling: When indicator lights, use Keurig descaling solution or vinegar mix. - Fill reservoir with descaling solution. - Run multiple brew cycles without pod. - Rinse with fresh water cycles.
2. Needle Cleaning: Use paper clip to clear entry and exit needles if clogged.
3. Exterior Cleaning: Unplug, cool, use mild detergent. Do not immerse.

CAUTION! Unplug before cleaning. Never use sharp objects inside brewer.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. UL listed. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com