Keurig Model K Compact K35 Manual

The Keurig K-Compact K35 is a single-serve coffee maker designed for home use, featuring a 36-ounce removable water reservoir, multiple brew sizes (6, 8, 10 oz), a descaling alert system, energy-saving auto-off, a removable drip tray for travel mugs, and compatibility with all Keurig K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brew chamber, Removable water reservoir, Control panel with buttons, Drip tray, Power cord, K-Cup pod holder.

Feature	Description
Removable Water Reservoir	36 oz capacity, easy-fill design
Brew Size Selection	6, 8, and 10 oz brew sizes
Descaling Alert	Indicator light prompts when descaling is needed
Auto-Off	Energy-saving feature turns off after 2 hours
Removable Drip Tray	Accommodates travel mugs up to 7.2 inches
K-Cup Pod Compatibility	Works with all Keurig licensed K-Cup pods
Power Button	Turns brewer on/off
Brew Button	Starts brewing cycle
Brew Size Button	Cycles through available brew sizes
Descale Indicator Light	Alerts when maintenance is required

Installation & Setup

Unpack and inspect contents. Place on clean, level surface.

Remove packaging materials from brewer and components.
Wash removable water reservoir with warm, soapy water; rinse thoroughly.
Place drip tray in position; ensure it is securely seated.
Plug power cord into 120V AC outlet.

WARNING! Do not immerse brewer in water or other liquids. Keep cord away from heated surfaces.

First-Time Use

Prime the brewing system before first brew.

Fill water reservoir with fresh, cold water; place back on brewer.
Press POWER button to turn on; brewer will heat (approx. 3 minutes).
Without a K-Cup pod, place a mug on drip tray and press BREW button to run water through system.
Repeat process 2-3 times to flush system.
Brewer is now ready for use with K-Cup pods.

CAUTION! Use only cold, fresh water. Do not use distilled or sparkling water.

Specifications

Model: K-Compact K35
Water Reservoir: 36 oz removable
Brew Sizes: 6, 8, 10 oz
Power: 120V AC, 60Hz, 1470W
Dimensions: 12.5" H x 9.8" W x 12.2" D
Weight: 6.5 lbs
Auto-Off: 2 hours
Compatibility: All Keurig licensed K-Cup pods
Warranty: 1-year limited

Controls and Settings

Control Panel: POWER button, BREW button, BREW SIZE button, DESCALING indicator light.

Operation: Press POWER to turn on (blue light). Select brew size with BREW SIZE button (indicator lights show selection). Insert K-Cup pod, place mug, press BREW to start cycle.

Settings: Brew size memory remembers last selection. Auto-off activates after 2 hours of inactivity. Descaling alert light illuminates when maintenance required.

Brewing Coffee

Follow steps for optimal brewing.

Ensure brewer is on and heated (blue power light on).
Lift handle, insert K-Cup pod, close handle firmly.
Place mug (up to 7.2") on drip tray.
Press BREW SIZE to select desired size (6, 8, or 10 oz).
Press BREW button; brewing begins immediately.
When cycle completes, lift handle to eject used pod.

Tip: For stronger coffee, use smaller brew size or select "Strong Brew" K-Cup pods.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

Unplug brewer before cleaning.
Wash water reservoir, lid, and drip tray with warm, soapy water weekly.
Wipe exterior with damp cloth; do not use abrasive cleaners.
Clean needle: Turn off, unplug, lift handle, use paperclip to clear any blockage in top and bottom needles.
Descale every 3-6 months or when indicator light comes on.

CAUTION! Never immerse brewer base, cord, or plug in water.

Descaling Procedure

Required to remove mineral buildup.

Fill reservoir with 16 oz white vinegar and 16 oz water.
Place large mug (at least 20 oz) on drip tray.
Press POWER, then BREW button without K-Cup pod.
When reservoir is half empty, add 16 oz fresh water.
Repeat brewing until "Add Water" light comes on.
Rinse reservoir thoroughly, fill with fresh water.
Brew multiple cycles with fresh water only to rinse.
Descale light will turn off after procedure.

WARNING! Use only Keurig descaling solution or white vinegar. Rinse thoroughly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Check outlet; ensure cord is plugged in securely.
No water flow	Clogged needle/reservoir	Clean needles; ensure reservoir is seated properly.
Brew is too weak	Mineral buildup	Descale brewer; use smaller brew size.
Brewer leaks	Improper K-Cup insertion	Ensure K-Cup is properly seated; check seal.
Descale light on	Mineral buildup	Perform descaling procedure.
Brew stops mid-cycle	Overheating	Unplug, wait 1 hour, plug back in.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-866-901-2739; www.keurig.com