Keurig Model B70 Manual

The Keurig Model B70 is a single-serve coffee brewing system featuring programmable settings, multiple cup sizes, a large water reservoir, a removable drip tray, a descaling alert, an energy-saving auto-off function, and compatibility with K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brewing unit, Water Reservoir, Removable Drip Tray, Control Panel, K-Cup Holder, Power Cord.

Feature	Description
Programmable Settings	Set brew time, cup size, and strength
Multiple Cup Sizes	Brew 6 oz, 8 oz, or 10 oz servings
Large Water Reservoir	Holds up to 48 oz of water
Removable Drip Tray	Accommodates travel mugs; easy to clean
Descaling Alert	Indicator light prompts for descaling
Energy-Saving Auto-Off	Turns off automatically after 2 hours
K-Cup Compatibility	Works with all K-Cup pod varieties
Brew Strength Control	Adjusts brew strength (regular or bold)
Power Button	Turns brewer on/off
Add Water Indicator	Light alerts when water is low

Installation & Setup

Unpack and inspect contents. Place on a clean, level, and stable surface.

Remove all packaging materials from inside and outside the brewer.
Wash the water reservoir with warm, soapy water; rinse and dry thoroughly.
Place the reservoir onto the back of the brewer, ensuring it is securely seated.
Plug the power cord into a standard 120V AC outlet.

WARNING! Do not use the brewer without water. Ensure the brewer is unplugged during cleaning.

First-Time Use

Prime the brewing system before first use.

Fill the water reservoir with fresh, cold water up to the MAX fill line.
Place a large mug on the drip tray.
Turn the brewer ON using the power button.
Without inserting a K-Cup, lift and close the brewer handle to run water through the system. Repeat this process 3-4 times to prime.
The brewer is now ready for normal use with K-Cup pods.

CAUTION! Use only cold, fresh water. Do not use distilled or sparkling water.

Specifications

Model: B70 Single-Serve Brewer.
Power: 120V AC, 60Hz, 1470W.
Water Reservoir Capacity: 48 oz.
Cup Sizes: 6 oz, 8 oz, 10 oz (programmable).
Brew Time: Approximately 1 minute per cup.
Dimensions: 13.5" H x 10.2" W x 13.2" D.
Weight: 7.5 lbs.
Warranty: 1-year limited warranty.

Controls and Settings

Control Panel: POWER, CUP SIZE (6oz/8oz/10oz), BREW STRENGTH, PROGRAM, AUTO OFF.

Programming: Press PROGRAM to set clock, auto brew time, and cup size defaults.

Brew Strength: Select REGULAR or BOLD for stronger coffee. Auto Off: Enable/disable the 2-hour auto shut-off feature. Add Water Indicator: Lights up when the water reservoir is low. Descaling Alert: Flashing light indicates it's time to descale.

Brewing Coffee

Brew a single cup using a K-Cup pod.

Ensure the brewer is ON and the water reservoir is filled.
Lift the brewer handle and insert a K-Cup pod into the holder.
Close the handle firmly.
Place a mug (up to 7 inches tall) on the drip tray.
Select your desired cup size (6oz, 8oz, 10oz) and brew strength.
Press the BREW button. Brewing will begin and complete automatically.
After brewing, lift the handle to eject the used K-Cup pod.

Tip: For best results, use fresh, cold water and store K-Cups in a cool, dry place.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and longevity.

Exterior: Wipe with a damp cloth. Do not use abrasive cleaners.
Water Reservoir: Remove and wash weekly with warm, soapy water.
Drip Tray & K-Cup Holder: Remove and rinse regularly to prevent coffee residue buildup.
Needle: If clogged, use a paper clip to gently clear the entrance and exit needles (brewer unplugged).

WARNING! Unplug the brewer before cleaning. Never immerse the brewer base in water.

Descaling Procedure

Descale every 3-6 months or when the DESCALE light flashes.

Empty and rinse the water reservoir.
Fill the reservoir with 16 oz of white vinegar and 16 oz of fresh water.
Place a large mug on the drip tray.
Run the brewer (without a K-Cup) until half the reservoir is emptied.
Turn the brewer OFF and let it sit for 30 minutes.
Turn the brewer ON and run the remaining solution through.
Rinse the reservoir thoroughly and fill with fresh water.
Run multiple cycles of fresh water through the brewer (without a K-Cup) to rinse out any vinegar residue.

CAUTION! Do not use descaling solutions other than vinegar. Ensure thorough rinsing.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Ensure the power cord is plugged in; check outlet.
No water flow	Empty reservoir/clog	Fill reservoir; check for clogs in needles; descale.
Brew is too weak	Incorrect setting	Select BOLD brew strength; use smaller cup size.
Brewer leaks	Loose reservoir/overfill	Ensure reservoir is seated correctly; do not overfill.
DESCALE light is on	Mineral buildup	Perform descaling procedure as outlined.
Coffee grounds in cup	Damaged K-Cup	Use a new, undamaged K-Cup pod.

Reset: Unplug the brewer for 1 minute, then plug back in.

Service: 1-866-901-2739; www.keurig.com