Keurig Mini User Manual

The Keurig Mini is a compact single-serve coffee brewer designed for home or office use. It features one-touch brewing, automatic shut-off, removable drip tray, descaling alert, and compatibility with most K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Operation 6. Brewing Guide 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact brewer body, Removable drip tray, K-Cup pod holder, Power button, Brew button, Water reservoir, Descaling indicator light.

Feature	Description
Compact design	Fits in small spaces; ideal for dorm, office, or kitchen
One-touch brewing	Press button to brew single cup in under a minute
Removable drip tray	Accommodates travel mugs up to 7 inches tall
Automatic shut-off	Turns off 90 seconds after brew cycle ends
Descaling alert	Light indicates when descaling is needed
K-Cup pod compatibility	Works with most K-Cup brands (not Keurig 2.0)
Power button	Turns brewer on/off; blue light indicates power
Brew button	Starts brewing cycle when pressed
Water reservoir	Holds up to 6 cups (12 oz each) of water
Energy efficient	Low power consumption in standby mode

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

Remove packaging materials from inside and outside brewer.
Wash removable parts (drip tray, water reservoir) with warm soapy water; rinse thoroughly.
Place brewer on flat surface away from heat sources and water splashes.
Fill water reservoir with fresh cold water; do not exceed MAX line.
Plug power cord into 120V AC outlet.

WARNING! Do not use without water; ensure hands are dry when handling plug.

First-Time Use

Prime the brewer before first use to remove manufacturing residues.

Press POWER button to turn on; blue light will illuminate.
Lift and close handle without inserting K-Cup pod.
Place mug on drip tray.
Press BREW button; hot water will flow into mug.
Discard water; repeat process 2-3 times.
Brewer is now ready for use with K-Cup pods.

CAUTION! Water will be hot; avoid contact with steam or hot surfaces.

Specifications

Dimensions: 4.5" W x 9.8" H x 11.3" D.
Weight: 4.6 lbs.
Water Reservoir Capacity: 6 cups (12 oz each).
Brew Sizes: 6, 8, 10 oz (default 8 oz).
Power: 120V AC, 60Hz, 1470W.
Brew Time: Under 1 minute per cup.
Auto Shut-Off: 90 seconds after brew.
Compatibility: Most K-Cup pods (excluding Keurig 2.0 locked pods).
Warranty: 1-year limited warranty.

Controls and Operation

Front Panel: POWER button (blue light), BREW button. Handle: Lift to open K-Cup chamber.

Brewing Steps:

Press POWER to turn on (blue light on).
Lift handle; insert K-Cup pod.
Close handle firmly.
Place mug on drip tray.
Press BREW button; brewing starts immediately.
Brew stops automatically when selected size is reached.
Brewer shuts off 90 seconds after cycle ends.

Note: To change brew size, press and hold BREW button during brew cycle until desired size is reached.

Brewing Guide

For optimal coffee, tea, or hot cocoa.

Use fresh cold water; refill reservoir as needed.
Choose K-Cup pod; check expiration date.
Insert pod; ensure handle is fully closed.
Select brew size (6, 8, 10 oz) by pressing/holding BREW.
Use appropriate mug size; travel mugs fit with drip tray removed.
For stronger brew, use smaller cup size or brew twice with same pod.

Tip: Preheat mug with hot water for hotter beverage.

Maintenance & Cleaning

Regular cleaning ensures best performance and longevity.

Unplug brewer and let cool before cleaning.
Remove and wash drip tray, water reservoir in warm soapy water weekly.
Wipe exterior with damp cloth; do not immerse in water.
Clean needle (inside K-Cup chamber) with paper clip monthly to prevent clogs.
Descale every 3-6 months or when indicator light comes on.

CAUTION! Never use abrasive cleaners or scouring pads.

Descaling Procedure

Mineral buildup affects performance; descale when light illuminates.

Fill reservoir with 16 oz white vinegar or Keurig descaling solution.
Place large mug on drip tray.
Press POWER; lift and close handle without pod.
Press BREW; half of solution will dispense into mug.
Wait 30 minutes, then press BREW to dispense remaining solution.
Discard vinegar; rinse reservoir thoroughly.
Fill with fresh water; run 3-4 brew cycles (no pod) to rinse.
Descale light will turn off after completion.

WARNING! Vinegar smell is normal; ensure proper rinsing.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Check plug connection; ensure outlet works; press POWER firmly.
No water flow	Empty reservoir/clog	Fill reservoir; check for kinks in internal tubing; descale.
Weak or small brew	Clogged needle	Clean exit needle with paper clip; descale brewer.
Leaking water	Loose parts	Ensure reservoir is seated properly; check drip tray alignment.
Descale light on	Mineral buildup	Perform descaling procedure as outlined.
Coffee not hot enough	Cold mug/preheat	Preheat mug with hot water; ensure brewer is fully heated before brewing.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-866-901-2739; www.keurig.com