Keurig Mini Plus Coffee Maker Manual

The Keurig Mini Plus is a compact single-serve coffee maker designed for home or office use. It features one-touch brewing, multiple cup sizes, an energy-saving auto-off function, a removable drip tray for travel mugs, and a simple descaling process. Compatible with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Compact brewer body, Removable drip tray, Water reservoir, Power button, Brew button, Cup size selector, Indicator lights.

Installation & Setup

Unpack and inspect contents. Place on clean, level surface.

1. Remove packaging: Take brewer and accessories out of box.
2. Place drip tray: Insert drip tray into base.
3. Fill water reservoir: Lift reservoir, fill with fresh cold water, replace.
4. Plug into power outlet: Use 120V AC outlet.

WARNING! Do not use without water. Ensure brewer is on stable surface away from edges.

First-Time Use

Prime the brewer before first brew.

1. Power on: Press POWER button; lights will flash.
2. Prime system: Without K-Cup, place mug, press BREW button to run water through.
3. Select cup size: Use CUP SIZE button to choose 6, 8, or 10 oz.
4. Insert K-Cup: Lift handle, insert pod, close firmly.
5. Brew: Press BREW button; cycle completes in under a minute.

CAUTION! Water may be hot. Keep hands clear during brew cycle.

Specifications

• Dimensions: Compact design fits in small spaces.
• Brew Sizes: 6 oz, 8 oz, 10 oz.
• Water Reservoir: 48 oz capacity.
• Power: 120V AC, 60Hz, 1470W.
• Auto-Off: 90 seconds after brew.
• Compatibility: All Keurig K-Cup pods.
• Warranty: 1-year limited warranty.
• Weight: Lightweight for portability.

Controls and Indicators

Front Panel: POWER button, BREW button, CUP SIZE button, Add Water light, Descale light.

Indicator Lights: Green power light when on; Add Water light flashes when reservoir is low; Descale light glows when maintenance needed.

Brewing: Select size, press BREW. Auto-Off: Brewer shuts off 90 seconds after last brew. Reset: Unplug for 10 seconds to reset if unresponsive.

Brewing Coffee

Steps for brewing with K-Cup pods.

1. Power on: Press POWER; wait for ready light.
2. Fill reservoir: Ensure adequate water.
3. Place mug: On drip tray.
4. Insert K-Cup: Lift handle, insert pod, close.
5. Select size: Press CUP SIZE until desired oz lights.
6. Brew: Press BREW; cycle starts immediately.
7. Remove pod: After brewing, lift handle to eject pod.

Tip: For stronger coffee, use smaller cup size setting.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

1. External cleaning: Wipe with damp cloth; no harsh chemicals.
2. Drip tray: Remove and wash with warm soapy water weekly.
3. Water reservoir: Remove, rinse, dry before refilling.
4. Needle: Use paper clip to clear coffee grounds if clogged.

CAUTION! Unplug before cleaning. Do not immerse in water.

Descaling Process

Descale every 3-6 months or when light indicates.

1. Prepare solution: Mix Keurig descaling solution with water.
2. Fill reservoir: Pour solution into reservoir.
3. Start descale: Press POWER, then hold BREW and CUP SIZE for 3 seconds.
4. Run cycles: Brew into large container until reservoir empty.
5. Rinse: Fill with fresh water, brew multiple times to rinse.

WARNING! Use only Keurig descaling solution; vinegar may damage.

Regulatory Information

FCC Part 15: Class B device; complies with interference limits. UL listed for safety. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 10 seconds, then plug back in.

Service: 1-866-901-2739; www.keurig.com