Keurig Mini Go Manual

The Keurig Mini Go is a compact, portable single-serve coffee maker designed for travel and small spaces. It features a simple one-button operation, uses K-Cup pods, has a removable drip tray, a travel mug friendly design, automatic shut-off, and a descaling alert. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Compact brewer body, Removable drip tray, K-Cup pod holder, Power button, Water reservoir, Travel mug slot.

Feature	Description
One-Touch Brewing	Simple button operation for brewing
K-Cup Pod Compatibility	Uses standard K-Cup pods
Removable Drip Tray	For easy cleaning and accommodates travel mugs
Compact & Portable Design	Lightweight for travel and small countertops
Automatic Shut-Off	Turns off 90 seconds after brew cycle
Descaling Alert	Light indicates when descaling is needed
Water Reservoir	Holds enough water for one cup
Power Cord Storage	Wrap-around cord for neat storage
Travel Mug Friendly	Fits mugs up to 7 inches tall
Energy Efficient	Low power consumption

Unpacking and Setup

Unpack and inspect contents. Place on a stable, level surface.

1. Remove all packaging materials from brewer and components.
2. Wash the removable drip tray with warm, soapy water and dry thoroughly.
3. Place brewer on a flat, stable surface away from edges.
4. Ensure the power cord is unwrapped and ready for connection.
5. Plug into a standard 120V AC, 60Hz outlet.

WARNING! Do not use outdoors or near water. Keep cord away from heated surfaces.

First-Time Use

Before first brew, run a water-only cycle to clean the internal system.

1. Fill the water reservoir with fresh, cold water to the MAX line.
2. Place a mug on the drip tray. Do not insert a K-Cup pod.
3. Press the POWER/BREW button to start the cycle.
4. Allow the full cycle to complete and discard the water.
5. Repeat for a total of 3 cycles to ensure system is clean.

CAUTION! The brewer and water will become hot during operation. Do not touch hot surfaces.

Specifications

• Dimensions: Compact, travel-friendly size.
• Brew Size: Single serve (6 oz, 8 oz, 10 oz options via pod).
• Power: 120V AC, 60Hz, 1470W.
• Water Reservoir Capacity: Holds enough for one cup.
• Compatibility: Works with most licensed K-Cup pods.
• Weight: Lightweight for portability.
• Automatic Shut-Off: 90 seconds post-brew.
• Warranty: Limited 1-year warranty.

Controls and Operation

Single button control: POWER/BREW. Indicator light shows power and descaling status.

Operation: Press button once to start brewing. Light will illuminate during cycle. Brewer will automatically shut off.

Descaling Indicator: Light will flash when descaling is required.

Brewing Instructions

For optimal coffee, tea, or hot cocoa.

1. Lift the handle and insert a K-Cup pod. Close handle firmly.
2. Place a mug (or travel mug) on the drip tray.
3. Fill the water reservoir with cold water to desired cup size line.
4. Press the POWER/BREW button. The light will turn on.
5. Brewing will complete in under a minute.
6. After brewing, discard the used K-Cup pod.

Tip: For stronger coffee, use the 6 oz setting or a bold roast pod.

Cleaning and Maintenance

Regular cleaning ensures best performance and longevity.

1. Daily: Wipe exterior with a damp cloth. Empty and rinse drip tray.
2. Weekly: Remove the drip tray and K-Cup holder. Wash with warm, soapy water. Rinse and dry thoroughly before replacing.
3. Monthly: Clean the exit needle by using a paperclip to gently remove any coffee grounds (unplug first).

CAUTION! Unplug brewer before cleaning. Do not immerse in water.

Descaling

Mineral buildup from water requires periodic descaling.

1. When descale light flashes, prepare Keurig descaling solution or white vinegar mixture.
2. Fill reservoir with descaling solution.
3. Place a large mug on the drip tray.
4. Press brew button (without a K-Cup) and run multiple cycles until reservoir is empty.
5. Rinse thoroughly by running multiple cycles with fresh water.

WARNING! Follow descaling instructions precisely. Improper descaling can damage the brewer.

Travel and Storage

Designed for portability.

1. Ensure brewer is completely cool, dry, and empty.
2. Wrap the power cord securely around the base.
3. Store in a carrying case or protective bag if available.
4. When traveling, pack in luggage with cushioning to prevent damage.

Tip: Use bottled water when traveling to areas with hard water to reduce descaling needs.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. UL listed for safety. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Check outlet; ensure cord is plugged in securely.
No water flow	Clogged needle/reservoir	Clean exit needle; ensure water reservoir is filled.
Weak or small brew	Mineral buildup	Descale the brewer.
Light flashing	Descaling needed	Perform descaling procedure.
Leaking water	Loose parts or overfilled	Ensure K-Cup holder and drip tray are seated properly. Do not overfill reservoir.
Coffee not hot enough	Cold mug or initial cycles	Preheat mug with hot water. Ensure brewer has completed initial heating cycle.

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-866-901-2739; www.keurig.com