Keurig K85 Owner's Manual

The Keurig K85 is a premium single-serve coffee maker featuring a large 80oz water reservoir, programmable auto on/off, multiple brew sizes (4oz to 12oz), strong brew option, digital display with clock, descale indicator, removable drip tray for tall travel mugs, energy saving mode, and compatibility with all Keurig K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large 80oz water reservoir, Digital display with touch controls, Removable drip tray, K-Cup pod holder, Water filter holder, Power base with cord storage.

Feature	Description
Water Reservoir	80oz capacity, removable for easy filling
Brew Sizes	4oz, 6oz, 8oz, 10oz, 12oz programmable options
Strong Brew	Increases strength for bolder coffee
Digital Display	Shows time, brew settings, alerts, and descale indicator
Auto On/Off	Programmable start time and auto shut-off after 2 hours
Removable Drip Tray	Accommodates travel mugs up to 7.3 inches tall
Energy Saver Mode	Reduces energy consumption between brews
Descale Indicator	Alerts when descaling is needed
Water Filter	Compatible with Keurig water filter to reduce impurities
Power	120V AC, 60Hz, 1470 watts

Installation & Setup

Unpack and inspect contents. Place on clean, level, stable surface.

Remove all packaging materials from inside and outside the brewer.
Wash water reservoir and lid with warm, soapy water; rinse thoroughly.
Insert water filter (optional): Soak filter for 5 minutes, rinse, insert into holder.
Fill reservoir with fresh cold water and place on brewer.
Plug power cord into 120V outlet.

WARNING! Do not use without water. Ensure brewer is on a stable, heat-resistant surface away from edges.

First-Time Use

Prime the brewing system before first brew.

Power on: Press POWER button; display will illuminate.
Prime: Without a K-Cup pod, place a mug, select largest brew size (12oz), and start brew. Repeat until water flows steadily.
Set clock: Use MENU button to access clock setting; adjust with + and - buttons.
Program auto on: Set desired wake-up time for automatic brewing.
Brew first cup: Insert K-Cup pod, select brew size, press BREW.

CAUTION! Water and brewed beverage will be hot. Keep hands and face away during brew cycle.

Specifications

Model: Keurig K85
Water Reservoir: 80 oz (removable)
Brew Sizes: 4, 6, 8, 10, 12 oz (programmable)
Power: 120V AC, 60Hz, 1470W
Dimensions: 13.5" H x 10.2" W x 13.2" D
Weight: 9.5 lbs
Cord Length: 30 inches
Display: Digital LCD with touch controls
Compatibility: All Keurig K-Cup pods
Warranty: 1-year limited

Controls and Settings

Access functions via touch buttons and digital display.

Front Panel: POWER, BREW, STRONG, MENU, +, -, 4oz, 6oz, 8oz, 10oz, 12oz brew size buttons.

Display Icons: Clock, Auto On, Descaling Alert, Brew in Progress, Water Level.

Settings Menu: Press MENU to access: Clock Set, Auto On/Off, Brew Temperature (default 192°F), Energy Saver (On/Off), Factory Reset.

Brew Size Programming: Hold desired brew size button for 3 seconds during brew to reprogram volume.

Brewing Coffee

Brews one cup at a time using K-Cup pods.

Ensure water reservoir is filled.
Lift handle, insert K-Cup pod, close handle firmly.
Place mug on drip tray.
Select brew size (4oz to 12oz). For stronger coffee, press STRONG before brewing.
Press BREW button; brewing begins immediately.
When brew is complete, lift handle to eject used pod.

Tip: Preheat mug by running a water-only brew cycle for hotter coffee.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and taste.

Daily: Wipe exterior with damp cloth; empty drip tray and used pod holder.
Weekly: Remove and wash water reservoir, lid, and drip tray in warm, soapy water.
Monthly: Clean needle that pierces K-Cup: Turn off, unplug, use paper clip to clear blockage.
Water Filter: Replace every 2 months or after 60 tank refills.

CAUTION! Unplug before cleaning. Never immerse brewer in water or use abrasive cleaners.

Descaling Procedure

Descale when indicator light appears or every 3-6 months.

Fill reservoir with 16 oz white vinegar and 16 oz water.
Place large mug (at least 20 oz) on drip tray.
Press and hold 8oz and 12oz buttons for 3 seconds to enter descale mode.
Press BREW; repeat until ADD WATER appears.
Empty mug, rinse reservoir, fill with fresh water.
Press BREW to rinse; repeat until vinegar odor is gone.
Exit descale mode by pressing POWER.

WARNING! Use only Keurig descaling solution or white vinegar. Do not use other chemicals.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Check outlet; ensure cord is plugged in securely; try different outlet.
No water flow	Clogged needle/air lock	Descale; clean exit needle with paper clip; prime system.
Brew is too weak	Mineral buildup	Descale brewer; use STRONG button; ensure water filter is fresh.
Leaking water	Loose reservoir	Ensure reservoir is seated properly; check for cracks.
Display shows "Descale"	Mineral buildup	Perform descaling procedure immediately.
Small cup brewed	Brew size not set	Reprogram brew size: hold button during brew for 3 seconds.

Reset: Unplug for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com