Keurig K70 Instruction Manual

The Keurig K70 is a single-serve coffee brewing system designed for home use, featuring multiple brew sizes, a removable drip tray, a large water reservoir, a digital display, programmable settings, and a descaling alert. It brews using K-Cup pods and offers adjustable brew strength. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brew chamber, Removable drip tray, Water reservoir, Digital display, Control buttons, Power switch.

Feature	Description
Brew Sizes	6 oz, 8 oz, 10 oz selectable brew sizes
Brew Strength Control	Adjustable strength setting (Regular or Bold)
Water Reservoir	Removable 60 oz reservoir with handle
Digital Display	LCD screen showing status, settings, and alerts
Programmable Auto On/Off	Set brew start time and auto shut-off
Removable Drip Tray	Accommodates travel mugs; easy to clean
Descaling Alert	Indicator light prompts descaling when needed
Energy Saver Mode	Reduces power consumption when idle
Power Switch	Main power control on side of unit
K-Cup Pod Holder	Holds used K-Cup pods after brewing

Installation & Setup

Unpack and inspect contents. Place on stable, level surface near power outlet.

Remove packaging materials and stickers from exterior and water reservoir.
Fill water reservoir with fresh cold water and reattach to brewer.
Plug power cord into grounded 120V AC outlet.
Turn power switch to ON position; display will illuminate.
Prime the brewing system by running a water-only brew cycle (without a K-Cup).

WARNING! Do not use without water. Ensure drip tray is in place before brewing.

First-Time Use

After installation, follow these steps for initial setup.

Prime the system: Place a mug, press brew without inserting K-Cup to flush system.
Set clock: Use MENU button to access time settings; adjust with +/- buttons.
Set auto on/off: Program start time and auto shut-off (2 hours default).
Select preferred brew size and strength using control buttons.

CAUTION! First brew may be hotter than subsequent brews. Handle mug with care.

Specifications

Dimensions: 13.5" H x 10.2" W x 13.2" D.
Water Reservoir Capacity: 60 oz.
Power: 120V AC, 60Hz, 1470W.
Brew Sizes: 6 oz, 8 oz, 10 oz.
Brew Time: Approximately 1 minute per cup.
Compatibility: Uses licensed K-Cup pods.
Weight: 9.5 lbs.
Display: Backlit LCD with status icons.
Warranty: 1-year limited warranty.

Controls and Settings

Access settings via front panel buttons and digital display.

Control Panel: POWER, BREW, MENU, + (Up), - (Down), STRENGTH, SIZE.

Display Icons: Power, Ready, Brewing, Add Water, Descaling Alert, Clock.

Settings Menu: Clock set, Auto On time, Auto Off delay, Brew temperature (default 192°F), Language (English default), Factory reset.

Brew Strength: Regular (standard extraction) or Bold (longer brew time for stronger coffee).

Brewing Coffee

Brew using K-Cup pods.

Ensure brewer is on and READY light is illuminated.
Lift handle, insert K-Cup, close handle firmly.
Place mug on drip tray.
Select brew size (6/8/10 oz) using SIZE button.
Select strength (Regular/Bold) using STRENGTH button.
Press BREW button; brewing begins immediately.
When brewing completes, lift handle to eject used K-Cup.

Tip: Preheat mug with hot water for hotter coffee. Use filtered water for better taste.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

Daily: Wipe exterior with damp cloth; empty drip tray and K-Cup holder.
Weekly: Remove and rinse water reservoir; clean needle with paperclip to prevent clogs.
Monthly: Run vinegar solution or Keurig cleaning kit through brew cycle (without K-Cup).
As needed: Descale when ADD WATER/Descale light flashes (see Descaling Procedure).

CAUTION! Unplug before cleaning. Do not immerse brewer in water.

Descaling Procedure

Descale when mineral buildup occurs (approx. every 3-6 months).

Fill reservoir with descaling solution or white vinegar/water mix (50/50).
Place large mug or bowl on drip tray.
Press MENU, navigate to Descaling mode, press BREW to start.
Brew until reservoir is empty, then refill with fresh water.
Run multiple water-only brew cycles to rinse system.
Reset descale alert via MENU settings.

WARNING! Use only Keurig descaling solution or vinegar. Rinse thoroughly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check outlet; ensure power switch is ON; plug securely.
No water flow	Empty reservoir/clog	Refill reservoir; check for kinks in hose; clean needle.
Brew is weak or small	Mineral buildup	Descale brewer; ensure STRENGTH setting is correct.
Brewer leaks	Loose connections	Ensure reservoir seated properly; check drip tray alignment.
Descale light flashing	Mineral buildup	Perform descaling procedure; reset alert in menu.
Display error codes	System fault	Unplug for 2 minutes, replug; if persists, contact support.

Reset: Unplug for 10 seconds, replug, or use Factory Reset in menu.

Service: 1-866-901-2739; www.keurig.com