Keurig K10 Mini Plus Manual

The Keurig K10 Mini Plus is a compact single-serve coffee brewer designed for personal use, featuring a simple one-button operation, removable drip tray, energy-saving auto-off function, and compatibility with most K-Cup pods. It brews 6, 8, or 10 oz cups quickly. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Compact brewer body, Removable 6-oz drip tray, Water reservoir, Power button, Brew button, K-Cup pod holder.

Unpacking & Setup

Unpack and inspect contents. Place on stable, level surface.

1. Remove all packaging materials from brewer and components.
2. Wash removable parts: Rinse water reservoir and drip tray with warm water.
3. Place brewer on counter away from edges and heat sources.
4. Plug power cord into 120V AC outlet.

WARNING! Do not place brewer under cabinets; ensure proper ventilation. Handle with care to avoid damage.

First-Time Use

Prime the brewer before first brew.

1. Fill water reservoir with fresh cold water to MAX line.
2. Place a mug on drip tray.
3. Press POWER button; wait for indicator light to stop flashing (heating).
4. Lift and close handle without a K-Cup pod; press BREW button to run water through system.
5. Repeat priming cycle once more to clear any internal residues.
6. Brewer is now ready for use with a K-Cup pod.

CAUTION! Do not use without water. Ensure handle is fully closed before brewing.

Specifications

• Model: K10 Mini Plus.
• Brew Sizes: 6, 8, 10 oz.
• Power: 120V AC, 60Hz, 1470W.
• Water Reservoir Capacity: 24 oz.
• Dimensions: Compact design (approx. 5.2" W x 9.8" H x 11.3" D).
• Weight: 4.6 lbs.
• Compatibility: Most licensed K-Cup pods.
• Warranty: 1-year limited.
• Auto-Off: 90 seconds after brew completion.

Controls and Operation

Front Panel: POWER button, BREW button, Indicator light.

Operation: Press POWER to turn on; indicator flashes during heating, stays solid when ready. Lift handle, insert K-Cup pod, close handle firmly. Place mug on drip tray. Press BREW button to start cycle. Brewer automatically shuts off 90 seconds after brew.

Brew Size Selection: Press BREW button repeatedly to cycle through 6, 8, 10 oz options; selected size will blink. To brew, press and hold BREW button until cycle starts.

Brewing Process

Steps for brewing a single cup.

1. Ensure brewer is plugged in and powered on.
2. Fill water reservoir to desired level (not above MAX).
3. Place mug on drip tray.
4. Lift handle; insert K-Cup pod into holder.
5. Close handle firmly until it clicks.
6. Select brew size by pressing BREW button (light blinks for selected size).
7. Press and hold BREW button to start cycle; release after 3 seconds.
8. Brewing completes in under a minute.
9. Remove mug; discard used K-Cup pod.

Tip: For best taste, use fresh cold water and brew immediately after heating.

Cleaning & Descaling

Regular cleaning ensures optimal performance.

1. Daily: Wipe exterior with damp cloth; empty drip tray and rinse.
2. Weekly: Remove and rinse water reservoir; clean pod holder area with damp cloth.
3. Descaling: When descale indicator appears, use Keurig descaling solution or vinegar mix. Run descaling cycle per instructions.
4. Needle Cleaning: If clogged, use paper clip to clear entry and exit needles (unplug first).

WARNING! Unplug before cleaning. Never immerse brewer in water.

Storage & Care

For storage or non-use, empty water reservoir and run a water-only cycle to clear lines. Store in cool, dry place.

CAUTION! Do not store with water in reservoir. Avoid freezing temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com