Keurig K-Supreme Smart User Manual

The Keurig K-Supreme Smart is a single-serve coffee maker with MultiStream Technology for full, flavorful coffee, Smart Start for faster brewing, customizable brew strength and temperature controls, compatibility with all K-Cup pods, a 78 oz. removable water reservoir, a digital touch display, Wi-Fi connectivity for remote brewing via the Keurig app, and an energy-saving auto-off feature. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Initial Setup & Installation 3. First Brew & Wi-Fi Setup 4. Specifications 5. Controls & Settings 6. Brewing Guide 7. Maintenance & Descaling 8. Smart Features & App 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital Touch Display, Removable Water Reservoir, Drip Tray, K-Cup Pod Holder, Strength Control Button, Temperature Control Button, Power Button.

Feature	Description
MultiStream Technology	Five needles for optimal water flow through the K-Cup pod
Smart Start	Heats and begins brewing immediately upon pressing the brew button
Brew Strength Control	Select from STRONG, MEDIUM, or MILD brew strength
Temperature Control	Adjust brew temperature (192°F - 198°F)
Digital Touch Display	Shows settings, brew size, and status messages
Wi-Fi Connectivity	Connect to Keurig app for remote brewing and scheduling
Removable Water Reservoir	78 oz. capacity with easy-fill handle
Compatibility	Brews all K-Cup pod varieties
Auto-Off	Automatically turns off 2 hours after last brew (default)
Brew Size Options	4 oz., 6 oz., 8 oz., 10 oz., 12 oz.

Initial Setup & Installation

Unpack and inspect contents. Place on a stable, level, and dry countertop.

Remove all packaging materials and stickers from the brewer.
Wash the removable water reservoir and drip tray with warm, soapy water. Rinse and dry.
Fill the water reservoir with fresh, cold water and place it securely on the back of the brewer.
Plug the power cord into a standard 120V AC outlet.
Press the POWER button. The display will light up and the brewer will begin its initial setup cycle.

WARNING! Ensure the brewer is placed away from heat sources, sinks, and edges of countertops. Use only the provided power cord.

First Brew & Wi-Fi Setup

Complete the initial cleaning cycle before your first beverage.

Initial Cleaning: Without a K-Cup pod, place a large mug on the drip tray. Select the largest brew size (12 oz.) and start a brew cycle. Repeat 2-3 times with fresh water.
Brew Your First Cup: Lift and close the handle to open the K-Cup holder. Insert a K-Cup pod. Close the handle firmly. Place your mug. Select your desired brew size, strength, and temperature on the display. Press the BREW button.
Wi-Fi Setup: Download the Keurig app on your smartphone. Follow the in-app instructions to connect your brewer to your home Wi-Fi network. This enables remote brewing and schedule features.

CAUTION! The water and brewed beverage will be hot. Keep hands and face away during brewing.

Specifications

Product Name: Keurig K-Supreme Smart Single-Serve Coffee Maker.
Water Reservoir: 78 oz. removable, BPA-free.
Power: 120V AC, 60Hz, 1500W.
Brew Sizes: 4 oz., 6 oz., 8 oz., 10 oz., 12 oz.
Brew Time: Under 1 minute for most sizes with Smart Start.
Temperature Range: 192°F - 198°F (adjustable).
Dimensions: (Approx.) 13.4" H x 10.2" W x 15.3" D.
Weight: 9.5 lbs.
Connectivity: 2.4 GHz Wi-Fi (802.11 b/g/n).
Warranty: 1-Year Limited Warranty.

Controls & Settings

Access all settings via the Digital Touch Display or the Keurig app.

Front Panel Buttons: POWER, STRENGTH, TEMPERATURE, BREW SIZE (+/-), BREW.

Display Menu: Brew Size Selection, Strength (STRONG/MEDIUM/MILD), Temperature (192°/195°/198°F), Clock Set, Auto-Off Timer (Off, 5 min, 2 hr), Wi-Fi Status, Descaling Alert, Factory Reset.

App Controls: Remote Start Brew, Schedule Brews, Create Favorite Drink Profiles, Monitor Brewer Status, Run Cleaning Cycles, Descaling Reminders.

Brewing Guide

For optimal flavor, use the recommended settings for your K-Cup pod type.

Ensure the water reservoir is filled and a mug is placed on the drip tray.
Lift and close the handle to open the K-Cup holder.
Insert a K-Cup pod. Close the handle firmly until it clicks.
On the display, select your Brew Size using the +/- buttons.
(Optional) Press STRENGTH to cycle through STRONG, MEDIUM, MILD.
(Optional) Press TEMPERATURE to select your preferred brew temp.
Press the large BREW button to start. The display will show "HEATING" then "BREWING".
When brewing is complete, lift the handle to eject the used pod into the storage drawer.

Tip: For a stronger cup, select a smaller brew size or use the STRONG setting.

Maintenance & Descaling

Regular cleaning ensures great taste and machine longevity.

Daily: Wipe exterior with a damp cloth. Empty and rinse the drip tray and pod holder.
Weekly: Remove and wash the water reservoir and drip tray assembly in warm, soapy water.
Monthly/As Needed: Run a water-only cleaning brew cycle (without a pod).
Descaling: The display will alert you when descaling is needed (approx. every 3-6 months). Use only Keurig Descaling Solution or approved vinegar solution. Follow the on-display prompts or app instructions for the descaling procedure.

WARNING! Never use sharp objects to clean the needle assembly. Unplug the brewer before any deep cleaning.

Smart Features & App

Connect your brewer to the Keurig app for enhanced functionality.

App Features: Remote brew start from anywhere, Schedule brews for a specific time, Create and save custom drink profiles, Receive maintenance reminders (cleaning, descaling), Check water level status, Access troubleshooting guides.

Setup: Ensure your brewer is on and in standby mode. Open the Keurig app and follow the "Add a Brewer" steps. You will need your home Wi-Fi network name and password.

Care & Cleaning

Unplug the brewer before cleaning. Use a soft, damp cloth for the exterior. Do not immerse the brewer base, cord, or plug in water.

CAUTION! Do not use abrasive cleaners, scouring pads, or harsh chemicals. Never run descaling solution through a pod. Always empty the drip tray before moving the brewer.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Keurig Green Mountain, Inc. Keurig, K-Supreme, MultiStream Technology, and Smart Start are trademarks of Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact Keurig Customer Service at 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Ensure the power cord is plugged in securely. Check the outlet.
Display shows "Add Water"	Low/Empty reservoir	Fill the water reservoir and place it correctly. Ensure it is seated fully.
Brew is weak or incomplete	Clogged needles	Power off, unplug, and clean the exit needle (in pod holder) with a paperclip. Run a water-only brew cycle.
Brewer is leaking	Loose reservoir or overfilled drip tray	Check that the water reservoir is locked in place. Empty and clean the drip tray.
Wi-Fi won't connect	Network issues, wrong frequency	Ensure brewer is near router, on 2.4 GHz network (not 5 GHz). Reboot router and restart setup in app.
Descaling alert won't clear	Incomplete descaling cycle	Run the full descaling procedure again as prompted on the display or in the app.

Reset: To perform a factory reset, press and hold the POWER and BREW SIZE (-) buttons for 5 seconds.

Service: 1-866-901-2739; www.keurig.com