Keurig K-Supreme Single Serve Manual

The Keurig K-Supreme Single Serve Coffee Maker is a versatile brewer designed for convenience and customization. It features MultiStream Technology for optimal extraction, a 78 oz. removable water reservoir, Strong Brew option, Hot Water on Demand, Iced Brew setting, customizable temperature control (187°F - 192°F), and compatibility with K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Customizing Your Brew 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brewer with MultiStream Technology, Removable Water Reservoir, Drip Tray, K-Cup Pod Holder, Control Panel, and Power Cord.

Feature	Description
MultiStream Technology	Five needles for optimal coffee extraction and full flavor
Removable Water Reservoir	78 oz. capacity with easy-fill handle
Strong Brew	Increases strength and boldness of your coffee
Hot Water on Demand	Dispenses hot water without a pod
Iced Brew Setting	Brews over ice for perfect iced coffee
Temperature Control	Adjustable from 187°F to 192°F
Brew Size Options	4 oz., 6 oz., 8 oz., 10 oz., 12 oz.
Energy Saver Mode	Automatically turns off after 2 hours of inactivity
Descale Indicator	Alerts when it's time to descale the brewer
Compatibility	Works with all K-Cup pods

Installation & Setup

Unpack and inspect all components. Place brewer on a clean, stable, level surface.

Remove packaging materials from inside and outside the brewer.
Wash the water reservoir and drip tray with warm, soapy water. Rinse and dry thoroughly.
Place the drip tray in position. Ensure the water reservoir is securely seated.
Plug the power cord into a standard 120V AC outlet.

WARNING! Do not use the brewer without water. Ensure the water reservoir is properly installed before powering on.

First-Time Use

Prime the brewing system before first use.

Fill the water reservoir with fresh, cold water up to the MAX fill line.
Place a large mug (at least 12 oz.) on the drip tray.
Lift and close the handle without inserting a K-Cup pod.
Select the 12 oz. brew size and press the BREW button. Discard this water.
Repeat this priming process two more times.

CAUTION! The brewer and water will be hot. Do not touch hot surfaces. Use handles or knobs.

Specifications

Model: K-Supreme Single Serve.
Power: 120V AC, 60Hz, 1500W.
Water Reservoir: 78 oz. removable.
Brew Sizes: 4, 6, 8, 10, 12 oz.
Temperature Range: 187°F - 192°F (adjustable).
Dimensions (HxWxD): Approx. 13.4" x 9.8" x 13.0".
Weight: Approx. 7.5 lbs.
Compatibility: All K-Cup pods.
Warranty: 1-year limited.

Controls and Settings

Control Panel: POWER button, BREW button, STRONG button, ICED button, HOT WATER button, Temperature Control buttons (+/-), Brew Size buttons (4,6,8,10,12 oz).

LED Indicators: Power On, Heating, Ready to Brew, Descaling Alert.

Settings: Use Temperature Control buttons to adjust brew temp in 1°F increments. Press STRONG before brewing for a bolder cup. Press ICED before brewing for optimized iced coffee. Press HOT WATER to dispense hot water without a pod.

Brewing Coffee

Brewing with a K-Cup pod.

Ensure the brewer is powered on and ready (READY light illuminated).
Fill the water reservoir with fresh, cold water.
Lift the handle and insert a K-Cup pod. Close the handle firmly.
Place a mug on the drip tray.
Select your desired brew size (4,6,8,10,12 oz).
Press the BREW button. Brewing will begin.
When brewing is complete, lift the handle to eject the used pod.

Tip: For best results, use filtered water and brew within 30 seconds of inserting the pod.

Customizing Your Brew

Utilize advanced features for a personalized experience.

Strong Brew: Press STRONG button before brewing. LED will illuminate.
Iced Coffee: Press ICED button, select brew size, then BREW. Use a glass filled with ice.
Hot Water: Press HOT WATER button, select size, then BREW for tea, soup, etc.
Temperature: Press +/- buttons to adjust brew temperature. Setting is saved.
Energy Saver: Enabled by default. Brewer enters sleep mode after 2 hours idle.

Note: STRONG and ICED settings are canceled after one brew cycle.

Care & Cleaning

Regular cleaning ensures optimal performance and longevity.

Daily: Wipe exterior with a damp cloth. Empty and rinse the drip tray and water reservoir.

Weekly: Clean the K-Cup pod holder assembly. Remove and wash with warm, soapy water.

Descaling: Perform when DESCALE light illuminates. Use Keurig Descaling Solution or approved vinegar solution. Follow on-screen prompts or manual descaling instructions.

CAUTION! Unplug brewer before cleaning. Never immerse brewer, cord, or base in water or other liquids.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Keurig Green Mountain, Inc. Keurig, K-Supreme, K-Cup, and MultiStream are trademarks of Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	No power	Check outlet; ensure cord is plugged in securely.
No water flow / partial cup	Clogged needle, low water	Descale brewer; check water reservoir is full and seated; clean exit needle.
Brew is not hot	Temperature setting	Increase brew temperature via +/- buttons.
DESCALE light is on	Mineral buildup	Descale the brewer immediately.
Leaking water	Loose reservoir, overfilled	Ensure reservoir is locked in place; do not fill above MAX line.
Handle is hard to open/close	Pod misalignment, scale	Ensure pod is properly seated; descale brewer.

Reset: Unplug brewer for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com