Keurig K-Supreme Plus User Manual

The Keurig K-Supreme Plus is a single-serve coffee maker featuring MultiStream Technology for full, flavorful extraction, customizable brew strength and temperature controls, a 78 oz. removable water reservoir, compatibility with K-Cup and K-Mug pods, a large color touch display, descale indicator, auto-off functionality, and a drip tray with height adjustment. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brew Chamber, Removable Water Reservoir, Drip Tray with adjustable height, Color Touch Display, Strength Control Button, Temperature Control Button, Power Button.

Initial Setup & Installation

Unpack and inspect contents. Place on a clean, stable, level surface away from heat sources and water splashes.

1. Remove all packaging materials and stickers from the brewer and water reservoir.
2. Wash the removable water reservoir and drip tray with warm, soapy water. Rinse and dry thoroughly.
3. Place the brewer on your countertop. Ensure there is at least 3 inches of clearance above and behind for ventilation.
4. Fill the water reservoir with fresh, cold water and slide it into place on the back of the brewer.
5. Plug the power cord into a standard 120V AC outlet.

WARNING! Do not use the brewer without water. Do not immerse the brewer base, cord, or plug in water or other liquids.

First Brew & Programming

Power on the brewer; the display will light up and guide you through the initial setup.

1. Prime the Brewing System: The first time you use it, the brewer will prompt you to run a water-only brew cycle. Follow on-screen instructions.
2. Insert a K-Cup Pod: Lift the handle, place a pod in the K-Cup holder, and close the handle firmly.
3. Select Brew Size: Place your mug on the drip tray and use the touch screen to select your desired brew size.
4. Start Brewing: Press the flashing "BREW" button. The brew will begin.
5. Set Favorite Settings: After brewing, you can program a favorite brew size, strength, and temperature for one-touch brewing.

CAUTION! The brew needle and exit needle are sharp. Handle with care when cleaning.

Specifications

• Model: K-Supreme Plus.
• Power: 1500 Watts.
• Voltage: 120V AC, 60Hz.
• Water Reservoir: 78 oz. removable.
• Brew Sizes: 4, 6, 8, 10, 12, 14, 16 oz.
• Brew Time: Under 1 minute for most sizes.
• Dimensions (HxWxD): Approximately 13.4" x 9.8" x 15.3".
• Weight: Approximately 8.5 lbs.
• Warranty: 1 Year Limited Warranty.
• Pod Compatibility: All Keurig branded K-Cup and K-Mug pods.

Controls & Display

Access all functions via the Color Touch Display and physical buttons.

Physical Buttons: POWER, STRENGTH, TEMPERATURE.

Touch Display Icons: Brew Size Selection, Favorite, Settings Menu, Descaling Indicator, Add Water Alert, Auto-Off Status.

Settings Menu: Allows you to set Auto-Off time (Off, 30 min, 2 hrs), display brightness, brew temperature (Hot, Hotter, Hottest), brew strength (Mild, Medium, Strong), and to program your Favorite brew.

Brewing Customization

Customize your drink using the Strength and Temperature controls.

1. For a stronger cup: Press the STRENGTH button before brewing to cycle through Mild, Medium, and Strong settings. The Strong setting uses a slower flow rate for more extraction.
2. For a hotter cup: Press the TEMPERATURE button before brewing to cycle through Hot, Hotter, and Hottest settings.
3. To brew a Travel Mug: Select the 16oz brew size. The drip tray can be raised to its highest position or removed entirely to accommodate tall mugs.
4. Favorite Brew: After setting your preferred size, strength, and temperature, press and hold the "FAVORITE" icon on the screen for 3 seconds to save it.

Tip: Use filtered water for better tasting coffee and to reduce mineral scale buildup.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and taste.

1. Daily: Wipe exterior with a damp cloth. Empty and rinse the drip tray and drip tray cover.
2. Weekly: Remove and wash the water reservoir and lid in warm, soapy water. Rinse thoroughly.
3. Monthly: Clean the K-Cup Holder Assembly. Remove it by lifting the handle and pulling the holder straight out. Wash with warm, soapy water. Use a paperclip to clear any pod residue from the exit needle.
4. As Needed: Descale when the indicator light appears on the display.

WARNING! Unplug the brewer before cleaning any part. Never use sharp objects to clean needles.

Descaling Procedure

Descaling removes mineral buildup. Use only Keurig Descaling Solution or a vinegar-water mixture.

1. Ensure the brewer is on and the water reservoir is filled with fresh water.
2. Pour the entire bottle of Keurig Descaling Solution into the water reservoir.
3. From the Settings Menu on the touch display, select "Descale" and follow the on-screen prompts.
4. The brewer will run multiple water-only rinse cycles after the descaling solution. You may need to refill the reservoir with fresh water when prompted.
5. The process is complete when the descale indicator turns off.

CAUTION! Do not interrupt the descaling cycle. Ensure the drip tray and a large container are in place to catch liquid.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. UL Listed. Copyright © Keurig Green Mountain, Inc. Keurig, K-Supreme, MultiStream, K-Cup, and K-Mug are trademarks of Keurig Green Mountain, Inc., registered in the U.S. and other countries. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug the brewer for 2 minutes to perform a soft reset.

Service: 1-866-901-2739; www.keurig.com