Keurig K-Supreme Plus Special Edition Manual

The Keurig K-Supreme Plus Special Edition is a single-serve coffee maker featuring MultiStream Technology for full, flavorful coffee, a 78 oz. removable reservoir, 5 brew sizes, Strong Brew option, Hot Water on Demand, an energy-saving Auto-Off feature, a programmable display clock, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Hot Water on Demand 8. Maintenance & Descaling 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brewer with MultiStream Technology, Removable Water Reservoir, Drip Tray, Display Screen, Power Button, Brew Size Buttons, Strong Button, Hot Water Button.

Feature	Description
MultiStream Technology	Five needles inject water for full, rich flavor extraction
Removable Water Reservoir	78 oz. capacity with easy-fill handle
Brew Size Options	5 sizes: 4, 6, 8, 10, 12 oz.
Strong Brew	Increases strength and boldness
Hot Water on Demand	Dispenses hot water without a pod
Programmable Display	Shows time, auto-off status, and descale alerts
Energy Saving Auto-Off	Turns off brewer after 2 hours (adjustable)
K-Cup Pod Compatibility	Brews all K-Cup pod varieties
Drip Tray	Removable and adjustable for tall travel mugs
Quiet Brew Technology	Reduced noise during brewing

Installation & Setup

Unpack and inspect contents. Place on a clean, level, stable surface away from edges.

Remove all packaging materials and stickers from inside and outside the brewer.
Wash the water reservoir and lid with warm, soapy water. Rinse and dry thoroughly.
Fill the reservoir with fresh, cold water and place it securely on the back of the brewer.
Plug the power cord into a standard 120V AC outlet.
Ensure the drip tray is in place and the K-Cup holder is empty and closed.

WARNING! Do not use without water. Ensure the brewer is on a stable, heat-resistant surface away from sinks and hot surfaces.

First-Time Use

Power on the brewer; the display will illuminate. Follow priming steps.

Press the POWER button. The display will show "ADD WATER" if the reservoir is empty.
Prime the brewer: Without a K-Cup pod, place a large mug on the drip tray, close the handle, and select the 12 oz. brew size. Repeat this process 3 times to fill the internal lines.
Set the Clock: Press the MENU button, use the +/- buttons to set the time, then press SELECT.
Set Auto-Off: Press MENU, navigate to AUTO OFF, and select 2 hrs (default), 4 hrs, or OFF.
Your brewer is now ready for its first brew.

CAUTION! The first few brews may include small carbon particles from manufacturing—this is normal. Discard these initial brews.

Specifications

Model: K-Supreme Plus Special Edition.
Water Reservoir: 78 oz. removable.
Brew Sizes: 4, 6, 8, 10, 12 oz.
Power: 1500 Watts.
Voltage: 120V AC, 60Hz.
Dimensions (HxWxD): 13.4" x 10.2" x 15.4".
Weight: 8.6 lbs.
Display: Backlit LCD with clock.
Compatibility: All K-Cup pods.
Warranty: 1-Year Limited.

Controls and Settings

Access settings via the front panel buttons and display.

Front Panel: POWER, 4oz, 6oz, 8oz, 10oz, 12oz, STRONG, HOT WATER, MENU, +, -, SELECT.

Display Info: Shows time, selected brew size, STRONG icon, HOT WATER icon, "DESCALE" alert, and "ADD WATER" alert.

Menu Settings: Press MENU to access:
CLOCK: Set time.
AUTO OFF: Set to 2H, 4H, or OFF.
HOT WATER TEMP: Adjust default temperature (default 192°F).
BREW TEMP: Adjust coffee brewing temperature.
FACTORY RESET: Restore original settings.

Brewing Coffee

Brews single servings using K-Cup pods.

Press POWER to turn the brewer on. Ensure "READY" is displayed.
Lift the handle and insert any K-Cup pod. Close the handle firmly.
Place a mug (minimum 4 oz. capacity) on the drip tray.
Select your desired brew size (4, 6, 8, 10, or 12 oz.).
For a stronger cup, press the STRONG button before brewing (icon will illuminate).
Brewing begins automatically. The progress bar will fill on the display.
When brewing is complete, the pod is automatically ejected into the used pod drawer.

Tip: For best results, use filtered water and rinse the reservoir weekly.

Hot Water on Demand

Dispenses hot water for tea, cocoa, oatmeal, etc.

Ensure brewer is on and "READY" is displayed.
Place a mug on the drip tray.
Press the HOT WATER button. The icon will illuminate.
Select a brew size (6, 8, 10, or 12 oz.). Brewing begins immediately.
The default temperature is 192°F. Adjust via MENU > HOT WATER TEMP.

WARNING! Dispensed water is very hot. Keep hands and face away. Do not use without a mug in place.

Maintenance & Descaling

Regular cleaning ensures optimal performance and longevity.

Daily: Wipe exterior with a damp cloth. Empty used pod drawer.

Weekly: Remove and wash the water reservoir and lid. Rinse the drip tray.

Descaling: Required when the "DESCALE" alert appears (approx. every 3-6 months).

Fill reservoir with 16 oz. of white vinegar and 64 oz. of water.
Place a large mug on the drip tray. Press HOT WATER, select 12 oz., and start. Repeat until "ADD WATER" appears.
Discard vinegar water. Rinse reservoir thoroughly.
Fill with fresh water and run multiple 12 oz. HOT WATER cycles to rinse the system.
The "DESCALE" alert will turn off after 3 rinse cycles.

CAUTION! Unplug before cleaning exterior. Never immerse brewer in water. Use only Keurig descaling solution or white vinegar.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL Listed. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Ensure plug is secure in outlet; check circuit breaker.
Display shows "ADD WATER"	Empty/low reservoir	Fill reservoir with fresh water and reseat properly.
Slow brewing/dripping	Mineral buildup/needle clog	Descale brewer; use a paperclip to clear exit needle.
Coffee not hot enough	Settings/cold mug	Increase brew temp in MENU; preheat mug with hot water.
Leaking water	Loose reservoir/overfilled	Ensure reservoir is locked; do not fill above MAX line.
"DESCALE" alert on	Mineral buildup	Perform descaling procedure as outlined in Section 9.
No water dispensed	Air lock in system	Power off, unplug for 1 minute, then restart and prime.

Reset: Unplug for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com