Keurig K-Supreme Plus SMART Manual

The Keurig K-Supreme Plus SMART is a single-serve coffee maker with MultiStream Technology for full, flavorful coffee, SMART features for remote brewing via the Keurig app, a 78 oz. removable water reservoir, five brew sizes (4, 6, 8, 10, 12 oz.), Strong Brew option, Iced setting, Hot Water on Demand, descale indicator, and compatibility with all K-Cup pods. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to SMART Features 7. Brewing Coffee 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brewer with SMART connectivity, Removable Water Reservoir, Drip Tray, K-Cup Pod Holder, Control Panel, Power Cord.

Feature	Description
MultiStream Technology	Five needles for optimal water flow through the K-Cup pod
SMART Features	Wi-Fi connectivity for remote brewing via Keurig app
Removable Water Reservoir	78 oz. capacity with easy-fill handle
Brew Size Options	5 sizes: 4, 6, 8, 10, 12 oz.
Strong Brew	Option for bolder, more intense coffee
Iced Setting	Brews over ice without diluting flavor
Hot Water on Demand	Dispenses hot water without a pod
Descale Indicator	Alerts when descaling is needed
Energy Saver	Auto-off feature after 2 hours of inactivity
Compatibility	Works with all K-Cup pod varieties

Installation

Unpack and inspect contents. Place on a clean, stable, level surface.

Remove all packaging materials and stickers from brewer and water reservoir.
Wash the removable water reservoir with warm, soapy water. Rinse and dry thoroughly.
Place the drip tray in position. Ensure the water reservoir is correctly seated.
Plug the power cord into a standard 120V AC outlet.

WARNING! Do not use the brewer without water. Ensure the water reservoir is properly installed before powering on.

First-Time Setup

Power on the brewer; the display will illuminate. Follow initial setup steps.

Prime the brewer: Fill the water reservoir, place a large mug, and run a water-only brew cycle (without a pod) for each brew size.
Connect to Wi-Fi: Press the SMART button and follow on-screen prompts to connect to your home network via the Keurig app.
Set preferences: Use the control panel or app to set default brew size, temperature, and auto-off timing.
Brew your first cup: Insert a K-Cup pod, select your brew size, and press BREW.

CAUTION! The exterior and brewed liquid become hot during use. Handle with care.

Specifications

Model: K-Supreme Plus SMART.
Water Reservoir: 78 oz. removable.
Brew Sizes: 4, 6, 8, 10, 12 oz.
Special Brews: Strong Brew, Iced Setting, Hot Water on Demand.
Connectivity: Wi-Fi 2.4 GHz for SMART features.
Power: 120V AC, 60Hz, 1470W.
Dimensions: Approximately 13.4" H x 10.2" W x 15.3" D.
Weight: Approximately 9.5 lbs.
Compatibility: All Keurig K-Cup pods.
Warranty: 1-year limited.

Controls and Settings

Control Panel: POWER, SMART, STRONG, ICED, HOT WATER, 4oz, 6oz, 8oz, 10oz, 12oz brew buttons, display screen.

Display Indicators: READY, HEATING, ADD WATER, DESCALING, SMART CONNECTED.

Brew Settings: Select brew size with corresponding button. Press STRONG before brewing for more intense flavor. Press ICED before brewing for optimized iced coffee. Press HOT WATER to dispense hot water without a pod. SMART Settings: Connect via app for remote brewing, schedule brews, track pod inventory, receive maintenance alerts.

Connecting to SMART Features

Requires Wi-Fi (2.4 GHz), Keurig app (iOS/Android), and a Keurig account.

Ensure brewer is powered on and in READY mode.
Press and hold the SMART button for 3 seconds until the display shows connection mode.
Open the Keurig app, follow in-app instructions to connect brewer to your network.
Once connected, use the app to brew remotely, create schedules, and manage settings.

Tip: Keep brewer within range of your Wi-Fi router for stable connection.

Brewing Coffee

Supports all K-Cup pod varieties.

Lift and lower the handle to open the K-Cup pod holder.
Insert a K-Cup pod. Close the handle firmly.
Place a mug (min. 4 oz.) on the drip tray.
Select brew size (4, 6, 8, 10, 12 oz.). For stronger coffee, press STRONG first.
Press the flashing brew button to start. The display will show HEATING then BREWING.
For iced coffee, press ICED, select size, then brew over a cup of ice.
For hot water only, press HOT WATER, select size.
After brewing, discard the used pod.

WARNING! Do not touch the needle or pierce pods with foreign objects. Keep hands clear during brew cycle.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and taste.

Daily: Wipe exterior with a damp cloth. Empty and rinse the drip tray and water reservoir.

Weekly: Clean the K-Cup pod holder and needle. Use a paperclip to clear any clogs (unplug first).

Descaling: Perform when ADD WATER or DESCALING light appears. Use Keurig Descaling Solution or approved vinegar solution. Follow descaling instructions in manual or app.

CAUTION! Unplug before cleaning. Never immerse brewer in water. Use only approved cleaning solutions.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to conditions that it does not cause harmful interference. UL Listed: Meets safety standards. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power connection	Ensure plug is securely in outlet; check circuit breaker.
No water flow/small brew	Clogged needle/reservoir	Descale brewer; clean exit needle with paperclip (unplugged).
ADD WATER light on	Low water/air lock	Refill reservoir; run a water-only brew cycle to prime.
DESCALING light on	Mineral buildup	Perform descaling procedure immediately.
SMART connection fails	Wi-Fi/network issues	Ensure 2.4 GHz network; reboot router; repeat setup in app.
Coffee not hot enough	Settings/mug	Preheat mug with hot water; ensure brewer is fully heated (READY light).
Leaking water	Improper pod placement	Ensure pod is seated correctly; handle is fully closed.

Reset: Unplug for 60 seconds, then plug back in to reset the brewer.

Service: 1-866-901-2739; www.keurig.com