Keurig K Supreme Owners Manual

The Keurig K Supreme is a single-serve coffee maker featuring MultiStream Technology for full, flavorful extraction, customizable brew sizes (4oz to 12oz), strong brew option, 78oz removable water reservoir, energy saving auto-off, descale indicator, compatibility with all K-Cup pods, and a sleek touch display interface. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Customization Options 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brew chamber with MultiStream Technology, Removable 78oz water reservoir, Touch display panel, Drip tray, Power base, and K-Cup pod holder.

Feature	Description
MultiStream Technology	Five streams for full, even extraction from K-Cup pods
Brew Size Control	Customizable from 4oz to 12oz in 1oz increments
Strong Brew Button	Increases strength for bolder coffee
Removable Water Reservoir	78oz capacity with easy-fill handle
Energy Saving Auto-Off	Turns off after 2 hours of inactivity
Descale Indicator	Alerts when descaling is needed
Touch Display	Interactive control panel with brew progress
Hot Water Button	Dispenses hot water without a pod
Compatibility	Works with all K-Cup pod varieties
Quick Brew Times	Brews in under 1 minute

Installation & Setup

Unpack and inspect contents. Place on clean, level surface away from edges.

Remove all packaging materials from inside and outside the brewer.
Wash removable water reservoir with warm, soapy water and rinse thoroughly.
Place drip tray in position and ensure it's properly seated.
Fill water reservoir with fresh cold water and slide into place.
Plug power cord into 120V AC outlet.

WARNING! Do not use without water in reservoir. Keep away from heat sources and moisture.

First-Time Use

Power on brewer; follow priming procedure.

Press power button to turn on brewer; display will illuminate.
Lift and close brew handle to prime the system (no pod needed).
Place a large mug (12oz or more) on drip tray.
Press HOT WATER button to run water through the system; repeat 2-3 times.
Discard water from mug; brewer is now ready for first brew.

CAUTION! First few brews may contain manufacturing residues; always discard initial water runs.

Specifications

Dimensions: 13.5" H x 10.2" W x 15.3" D.
Water Reservoir: 78oz removable with handle.
Power: 120V AC, 60Hz, 1470W.
Brew Sizes: 4oz, 6oz, 8oz, 10oz, 12oz customizable.
Brew Technology: MultiStream Technology (5 streams).
Compatibility: All K-Cup pod varieties.
Auto-Off: 2 hours (default, can be disabled).
Display: Touch screen with brew progress.
Weight: 9.5 lbs.
Warranty: 1-year limited.

Controls and Settings

Access controls via touch display panel. Front Panel: POWER, BREW, STRONG, HOT WATER, brew size buttons.

Display Features: Brew size selection, strong brew indicator, descale alert, auto-off status, water level indicator.

Brew Settings: Default brew size (set to 8oz), strong brew toggle, auto-off enable/disable. Maintenance: Descaling mode, factory reset option. Display: Brightness adjustment, language selection (English default).

Brewing Coffee

Supports all K-Cup pod varieties.

Ensure brewer is on and water reservoir is filled.
Lift brew handle and insert K-Cup pod (any orientation).
Close brew handle firmly until it clicks.
Place mug on drip tray (minimum 4oz capacity).
Select brew size (4oz, 6oz, 8oz, 10oz, or 12oz).
Press STRONG button for bolder coffee (optional).
Press BREW button to start brewing cycle.
Brewing completes automatically; remove mug.
Lift handle to eject used pod into storage compartment.

Tip: For best results, use filtered water and fresh K-Cup pods.

Customization Options

Brew Size Memory: Set default brew size in settings menu. Strong Brew: Enhances flavor intensity for any brew size. Hot Water: Dispense hot water for tea, cocoa, or soup without a pod. Auto-Off: Disable or enable 2-hour auto-off feature.

Care & Maintenance

Daily: Wipe exterior with damp cloth. Weekly: Remove and wash water reservoir, drip tray, and pod holder. Monthly: Run vinegar solution or descaling solution when indicator lights.

Descaling Procedure:

Fill reservoir with descaling solution or white vinegar/water mix.
Place large container on drip tray.
Press HOT WATER button repeatedly until reservoir is empty.
Let solution sit in brewer for 30 minutes.
Rinse reservoir thoroughly and fill with fresh water.
Run multiple HOT WATER cycles until vinegar smell disappears.

CAUTION! Unplug before cleaning exterior. Never immerse brewer in water.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed for safety. Copyright © Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Ensure plug is securely in outlet; check circuit breaker.
No water flow	Empty reservoir/clog	Fill water reservoir; check for clogs in needle; descale.
Weak or small brew	Brew size setting	Select larger brew size; check water reservoir level.
Leaking water	Improper pod placement	Ensure brew handle is fully closed; check pod orientation.
Descale light on	Mineral buildup	Perform descaling procedure; reset light after completion.
Pod not punctured	Needle clog	Turn off, unplug, and use paper clip to clear upper needle.
Coffee not hot enough	Preheat cycle	Run HOT WATER cycle before brewing to preheat system.
Error messages	System fault	Unplug for 2 minutes, then restart; contact support if persistent.

Reset: Unplug for 2 minutes to reset electronic controls.

Service: 1-866-901-2739; www.keurig.com