Keurig K-Slim Owners Manual

The Keurig K-Slim is a single-serve coffee maker designed for speed and space-saving convenience. It features a multi-stream technology for optimal extraction, a 46 oz removable water reservoir, three brew sizes (8oz, 10oz, 12oz), a descale indicator, and compatibility with all Keurig K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking & Setup 3. First Use & Priming 4. Specifications 5. Controls and Operation 6. Brewing Your Beverage 7. Care & Maintenance 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brew chamber, Removable 46 oz water reservoir, Drip tray, Power button, Brew size buttons, Descaling indicator light.

Feature	Description
Multi-Stream Technology	Punctures the K-Cup pod in multiple places for full flavor extraction
Removable Water Reservoir	46 oz capacity for easy filling and cleaning
Brew Size Selection	Three options: 8oz, 10oz, and 12oz
Descale Indicator	Light alerts you when it's time to descale the machine
Fast Brewing	Brews a cup in under 2 minutes
Compact Design	Slim profile fits in small spaces
K-Cup Pod Compatibility	Brews any Keurig-branded K-Cup pod
Energy Saver Mode	Automatically turns off 90 seconds after last brew
Drip Tray	Removable for cleaning; accommodates travel mugs
Power Cord Storage	Wrap-around cord management

Unpacking & Setup

Unpack and inspect all contents. Place on a clean, stable, and level surface.

Remove all packaging materials from inside and outside the brewer.
Wash the removable water reservoir and drip tray with warm, soapy water. Rinse and dry.
Place the drip tray in position. Insert the water reservoir into the back of the brewer.
Plug the power cord into a standard 120V AC outlet.

WARNING! Do not use the brewer without water in the reservoir. Ensure the brewer is on a heat-resistant surface away from edges.

First Use & Priming

Before first brew, you must prime the system to remove air from the water lines.

Fill the water reservoir with fresh, cold water to the MAX fill line.
Lift and lower the brew handle without a K-Cup pod to open and close the brewing chamber.
Place a large mug (at least 12oz) on the drip tray.
Press the POWER button. The button will illuminate.
Press the 12oz brew button. The brewer will run water through the system without a pod. Discard this water.
Repeat the priming process (step 5) two more times. Your brewer is now ready for use.

CAUTION! The exterior surfaces may become hot during use. Do not touch hot surfaces.

Specifications

Dimensions: 4.5" W x 12.1" H x 11.3" D.
Water Reservoir: Removable, 46 oz capacity.
Brew Sizes: 8 oz, 10 oz, 12 oz.
Brew Time: Under 2 minutes.
Power: 120V AC, 60Hz, 1470W.
Weight: 4.2 lbs.
Compatibility: All Keurig K-Cup pods.
Warranty: 1-Year Limited Warranty.
Auto-Off: 90 seconds after last brew.

Controls and Operation

Front Panel: POWER button, 8oz/10oz/12oz brew size buttons, Descaling indicator light.

Operation: Press POWER to turn on (light illuminates). Select desired brew size. The brewer will heat, then begin brewing automatically when you press the size button. The POWER light will flash during heating and brewing.

Brew Size Guide: 8oz for a strong cup, 10oz for a standard mug, 12oz for a large mug or travel cup.

Energy Saver: The brewer will automatically power off 90 seconds after the last brew cycle is complete. Press POWER to turn it back on.

Brewing Your Beverage

Follow these steps for optimal brewing.

Ensure the brewer is on and the water reservoir is filled.
Lift the brew handle and insert a Keurig K-Cup pod. Close the handle firmly.
Place your mug on the drip tray.
Select your desired brew size (8oz, 10oz, 12oz) by pressing the corresponding button.
The brew cycle will begin. The POWER light will flash during brewing.
When the cycle is complete, lift the handle to eject the used pod into the storage compartment.

Tip: For best results, use filtered water and run a cleansing brew (without a pod) weekly.

Care & Maintenance

Regular cleaning ensures great-tasting coffee and extends brewer life.

Daily: Wipe exterior with a damp cloth. Empty and rinse the drip tray and pod holder.
Weekly: Remove and wash the water reservoir and drip tray in warm, soapy water. Run a cleansing brew (brew a cycle without a pod).
Monthly: Clean the exit needle (inside the brew chamber) with a paperclip to prevent clogs. Unplug the brewer first.

CAUTION! Never immerse the brewer base, cord, or plug in water or other liquids. Unplug before cleaning.

Descaling Procedure

The DESCALE light will illuminate when mineral buildup requires removal. Use Keurig Descaling Solution or white vinegar.

Empty the water reservoir. Fill it with 16 oz of descaling solution or a mixture of 16 oz white vinegar and 16 oz water.
Place a large mug on the drip tray. Press POWER.
Lift and close the brew handle without a pod. Press the 12oz brew button. Dispense half the solution into the mug and discard. Wait 30 minutes.
Press the 12oz button again to dispense the remaining solution. Discard.
Rinse the reservoir thoroughly. Fill with fresh water. Run multiple 12oz brew cycles (without a pod) until the vinegar odor is gone.
The DESCALE light will turn off after the process is complete.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. All rights reserved. Keurig, K-Slim, K-Cup, and the Keurig logo are trademarks of Keurig Green Mountain, Inc., registered in the U.S. and other countries. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Ensure the power cord is plugged in securely. Check the outlet.
No water flow / small cup	Clogged needle or descaling needed	Clean the exit needle with a paperclip. Descale the brewer.
DESCALE light is on	Mineral buildup	Perform the descaling procedure (Section 9).
Water leaks	Reservoir not seated / overfilled	Ensure reservoir is clicked into place. Do not fill above MAX line.
Brew is weak or tastes bad	Old pods / needs cleaning	Use fresh K-Cup pods. Run a cleansing brew cycle. Use filtered water.
Pod not punctured	Brew handle not closed fully	Open and firmly close the brew handle. Ensure pod is not obstructed.

Reset: Unplug the brewer for 2 minutes, then plug it back in.

Service: 1-866-901-2739; www.keurig.com