Keurig K-Select User Manual

The Keurig K-Select is a single-serve coffee maker featuring multiple brew sizes (6, 8, 10, 12 oz), a 52 oz removable water reservoir, an energy-saving auto-off function, a descale indicator, a quiet brew technology, and compatibility with all Keurig K-Cup pods. It includes a drip tray with adjustable height, a reusable My K-Cup filter, and simple touch button controls. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brew chamber, Removable water reservoir, Drip tray (adjustable), Control panel with brew size buttons, Power button, Descaling indicator light.

Installation & Setup

Unpack and inspect contents. Place on a clean, level, stable surface away from edges.

1. Remove all packaging materials from inside and outside the brewer.
2. Wash the removable water reservoir and lid with warm, soapy water. Rinse thoroughly.
3. Fill the water reservoir with fresh, cold water and place it securely on the back of the brewer.
4. Plug the power cord into a standard 120V AC outlet.
5. Lift and lower the brewer handle to open and close the K-Cup pod chamber.

WARNING! Ensure the brewer is placed on a heat-resistant surface away from water sources. Do not use the brewer without water in the reservoir.

First-Time Use

Prime the brewer before first use to ensure optimal performance.

1. Ensure the water reservoir is filled and properly seated.
2. Press the POWER button to turn the brewer on. The power light will illuminate.
3. Lift and close the handle without inserting a K-Cup pod. Place a large mug (12 oz or more) on the drip tray.
4. Select the 12 oz brew size. Press the BREW button to start a cleansing brew cycle. Discard the water.
5. Repeat the cleansing brew cycle two more times with fresh water. The brewer is now ready for use.

CAUTION! The water and brewed beverage will be very hot. Handle with care.

Specifications

• Product Model: K-Select Single-Serve Coffee Maker.
• Brew Sizes: 6, 8, 10, 12 oz.
• Water Reservoir Capacity: 52 oz (removable).
• Power: 120V AC, 60Hz, 1470W.
• Auto-Off: 2 hours.
• Dimensions (HxWxD): Approximately 13.0" x 9.8" x 13.3".
• Weight: Approximately 7.5 lbs.
• Compatibility: All Keurig K-Cup pods (licensed).
• Warranty: 1-year limited warranty.

Controls and Settings

Control Panel: POWER button, 6 oz button, 8 oz button, 10 oz button, 12 oz button, BREW button, Descaling indicator light.

Operation: Press POWER to turn on. Select desired brew size (light will illuminate). Press BREW to start. The brew process will begin after a short heating period.

Settings: Auto-off is pre-set to 2 hours and cannot be adjusted. The descale indicator light will illuminate when mineral buildup requires cleaning. Use only the brew size buttons to select your portion.

Brewing Coffee

Brews one cup at a time using Keurig K-Cup pods or the My K-Cup reusable filter.

1. Turn on the brewer with the POWER button. Wait for the power light to stop flashing.
2. Lift the handle to open the K-Cup pod chamber.
3. Insert a licensed K-Cup pod. Close the handle firmly.
4. Place a mug on the drip tray. Adjust the tray height if using a tall travel mug.
5. Select your desired brew size (6, 8, 10, or 12 oz) by pressing the corresponding button.
6. Press the BREW button. Brewing will start after a brief heating period.
7. When brewing is complete, lift the handle to remove and discard the used pod.

Tip: For a stronger brew, select a smaller cup size for the same K-Cup pod.

Maintenance & Cleaning

Regular cleaning ensures best performance and taste.

1. Exterior: Wipe with a soft, damp cloth. Do not use abrasive cleaners or immerse in water.
2. Water Reservoir & Lid: Wash weekly with warm, soapy water. Rinse thoroughly.
3. Drip Tray & Pod Holder: Remove and wash with warm, soapy water. Empty the drip tray regularly.
4. Needle: If clogged, turn off and unplug the brewer. Use a paper clip to gently clear the entry and exit needles.

CAUTION! Unplug the brewer and allow it to cool completely before cleaning. Never immerse the brewer base, cord, or plug in water.

Descaling

Descaling removes mineral buildup from internal components. The descale indicator light will illuminate when necessary.

1. Purchase Keurig Descaling Solution or a vinegar solution (white vinegar and water).
2. Fill the water reservoir with the descaling solution or a mixture of half white vinegar and half water.
3. Place a large mug on the drip tray. Run a brew cycle without a K-Cup pod. Discard the liquid.
4. Repeat brew cycles until the "Add Water" indicator appears.
5. Rinse thoroughly: Fill the reservoir with fresh water and run multiple brew cycles (without a pod) until the vinegar smell is gone.
6. The descale light will turn off after the process is complete.

WARNING! Follow descaling instructions precisely. Improper descaling can damage the brewer.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. All rights reserved. Keurig, K-Select, K-Cup, and My K-Cup are trademarks of Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug the brewer for 2 minutes, then plug it back in.

Service: 1-866-901-2739; www.keurig.com