Keurig K-Select Owner's Manual

The Keurig K-Select is a single-serve coffee maker featuring multiple brew sizes (6, 8, 10, 12 oz), a 48 oz removable water reservoir, Strong Brew option, auto-off functionality, descale indicator, and compatibility with all Keurig K-Cup pods. Designed for home use with 120V AC power. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brew chamber, Removable water reservoir, Drip tray, Control panel, Power base, K-Cup pod holder.

Feature	Description
Multi-stream technology	Extracts full flavor and aroma from K-Cup pods
4 brew sizes	6, 8, 10, and 12 oz options
Strong Brew button	Increases strength and boldness of coffee
Removable water reservoir	48 oz capacity with easy-fill handle
Descale indicator	Alerts when descaling is needed
Auto-off feature	Turns off 2 hours after last brew (default)
Energy saving mode	Reduces power consumption when idle
Drip tray	Removable with adjustable height for tall mugs
K-Cup pod storage	Built-in compartment for pod storage
Power button	Turns brewer on/off

Installation & Setup

Unpack and inspect contents. Place on clean, level surface.

Remove all packaging materials from inside and outside brewer.
Wash removable parts: Reservoir, drip tray, and K-Cup holder with warm soapy water.
Place drip tray in position (adjust height if needed for travel mug).
Fill water reservoir with fresh cold water and insert into brewer.
Plug power cord into 120V AC outlet.

WARNING! Do not use without water. Ensure brewer is on stable, heat-resistant surface away from edges.

First-Time Use

Prime the brewing system before first use.

Press POWER button to turn on brewer (lights will illuminate).
Lift and close brew handle without inserting K-Cup pod.
Place mug on drip tray.
Select largest cup size (12 oz) and press brew button.
Repeat process 3 times with fresh water to flush system.
Brewer is now ready for first K-Cup pod.

CAUTION! Water and brewed beverage will be hot. Keep hands clear during brew cycle.

Specifications

Dimensions: 13.0" H x 9.8" W x 13.3" D.
Water Reservoir: 48 oz removable.
Brew Sizes: 6, 8, 10, 12 oz.
Power: 120V AC, 60Hz, 1470W.
Weight: 7.5 lbs.
Cord Length: 30 inches.
Compatibility: All Keurig K-Cup pods.
Warranty: 1-year limited.
Auto-off: 2 hours (adjustable via settings).

Controls and Settings

Control Panel: POWER, 6/8/10/12 oz buttons, STRONG button, Auto-off indicator, Descaling indicator.

Operation: Press POWER to turn on (heating begins). Select brew size. Press STRONG for bolder coffee (optional). Lift handle, insert K-Cup, close handle, place mug, press brew button.

Settings: Auto-off timing (2 hr default, can be changed to 5 min-2 hr via button sequence). Descaling reminder (flashing light when needed). Brew temperature control (factory preset).

Brewing Coffee

For optimal results with K-Cup pods.

Ensure brewer is on and heated (ready light solid).
Lift brew handle fully.
Insert K-Cup pod (any variety).
Close handle firmly.
Place mug (up to 7.2" tall) on drip tray.
Select desired brew size (6, 8, 10, or 12 oz).
Press STRONG button if desired (light will illuminate).
Press brew button; brewing begins immediately.
Brew cycle completes automatically.

Tip: For stronger coffee, use STRONG button or smaller brew size with same pod.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

Daily: Wipe exterior with damp cloth; empty drip tray and used pod holder.
Weekly: Remove and wash water reservoir, drip tray, and K-Cup holder in warm soapy water.
Monthly: Clean needle that punctures K-Cup (use paper clip carefully).
As needed: Descale when indicator lights or every 3-6 months.

WARNING! Unplug brewer before cleaning. Never immerse brewer in water.

Descaling Procedure

Required when descale indicator flashes or flow slows.

Fill reservoir with 48 oz white vinegar or Keurig descaling solution.
Place large mug (at least 20 oz) on drip tray.
Turn brewer on, lift and close handle (no pod).
Press 12 oz and STRONG buttons simultaneously for 3 seconds to enter descale mode.
Press brew button; solution will dispense in pulses.
When reservoir is empty, refill with fresh water.
Repeat brewing with fresh water 5 times to rinse.
Descale mode exits automatically after final rinse.

CAUTION! Use only approved descaling solutions. Ensure thorough rinsing.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This appliance is for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check outlet; ensure cord is plugged in securely; try different outlet.
No water flow	Clogged needle/descaling needed	Clean exit needle with paper clip; descale brewer.
Small cup of coffee	Mineral buildup	Descale brewer; check water reservoir is full.
Leaking water	Loose reservoir/overfilled	Ensure reservoir seated properly; don't exceed fill line.
Coffee not hot enough	Cold mug/pre-heat needed	Pre-heat mug with hot water; ensure brewer heated fully.
Descale light flashing	Mineral buildup	Perform descaling procedure.
STRONG light not working	Mode not selected properly	Press STRONG before brew button; ensure light illuminates.

Reset: Unplug for 30 seconds, then plug back in.

Service: 1-866-901-2739; www.keurig.com