Keurig K-Select Coffee Maker Manual

The Keurig K-Select Coffee Maker is a single-serve brewer featuring multiple cup sizes (6, 8, 10, 12 oz), a 48 oz removable water reservoir, Strong Brew option for bolder coffee, descale indicator, auto-off (2 hours), drip tray with height adjustment, energy saving mode, and compatibility with all Keurig K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Initial Setup 3. Brewing Coffee 4. Specifications 5. Controls and Settings 6. Maintenance & Cleaning 7. Descaling 8. Energy Saving Features 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brewer with LCD screen, Removable water reservoir, Drip tray with adjustable height, K-Cup pod holder, Power base, Water filter handle (optional).

Feature	Description
Multi-size cup options	Brew 6, 8, 10, or 12 oz cups
Strong Brew button	Increases brew strength for bolder coffee
Removable 48 oz water reservoir	Easy fill and cleaning
Descale indicator	Alerts when descaling is needed
Auto-off	Turns off automatically after 2 hours of inactivity
Adjustable drip tray	Accommodates travel mugs up to 7.2 inches
Energy saving mode	Reduces energy consumption when not in use
LCD screen	Displays status and settings
Power button	Turns brewer on/off
Brew button	Starts brewing process

Initial Setup

Unpack and inspect contents. Place on clean, level surface away from heat sources.

Remove all packaging materials from inside and outside brewer.
Wash removable water reservoir with warm, soapy water; rinse thoroughly.
Fill reservoir with fresh water and insert into brewer.
Plug power cord into 120V AC outlet.
Prime the brewer: Turn on, place a large mug, run water through without a K-Cup pod.

WARNING! Do not use without water. Ensure brewer is plugged into grounded outlet.

Brewing Coffee

Power on brewer; wait for READY indicator.

Lift handle, insert K-Cup pod, close handle firmly.
Place mug on drip tray.
Select cup size: Press 6, 8, 10, or 12 oz button.
For stronger coffee: Press STRONG BREW before selecting size.
Press BREW button to start.
Brewing completes automatically; remove mug.

CAUTION! Hot surfaces; keep hands away from exit needle and brewed liquid.

Specifications

Dimensions: 13.0" H x 9.8" W x 13.3" D.
Water Reservoir: 48 oz removable.
Cup Sizes: 6, 8, 10, 12 oz.
Power: 120V AC, 60Hz, 1470W.
Auto-off: 2 hours (default).
Compatibility: All Keurig K-Cup pods.
Warranty: 1-year limited.
Weight: 7.5 lbs.

Controls and Settings

Access settings via LCD screen and button controls.

Front Panel: POWER, 6oz, 8oz, 10oz, 12oz, STRONG BREW, BREW.

LCD Screen: Displays READY, HEATING, DESCALE, ADD WATER, AUTO OFF settings.

Settings Menu: Hold 8oz button for 3 seconds to enter: Auto-off time (2hr, 4hr, off), Energy saving (on/off), Factory reset.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

Daily: Wipe exterior with damp cloth.
Weekly: Remove and wash water reservoir, drip tray, and K-Cup holder.
Monthly: Clean exit needle with paperclip (unplug first).
As needed: Descale when indicator lights.

Tip: Unplug brewer before cleaning any parts.

Descaling

Required when DESCALE indicator lights or every 3-6 months.

Purchase Keurig descaling solution or white vinegar.
Fill reservoir with descaling solution or equal parts vinegar/water.
Run brew cycles without K-Cup until reservoir is empty.
Rinse reservoir, fill with fresh water, run multiple cycles to flush.
Descale indicator resets automatically.

WARNING! Use only approved descaling solutions; follow instructions carefully.

Energy Saving Features

Auto-off: Turns off after 2 hours (adjustable to 4hr or off). Energy saving mode: Reduces standby power consumption.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power/no water	Check power outlet; ensure water reservoir is full and inserted.
Small cup brewed	Clogged needle	Clean exit needle with paperclip (unplugged).
Leaking water	Loose reservoir	Ensure reservoir is seated properly; check for cracks.
DESCALE light on	Mineral buildup	Perform descaling procedure.
No brew/no power	Overheating	Unplug, wait 1 hour, plug back in.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-866-901-2739; www.keurig.com