Keurig K-Mini Single Serve Manual

The Keurig K-Mini is a compact single-serve coffee maker designed for small spaces. It features a simple one-button operation, a removable drip tray for travel mugs, and a 12 oz reservoir. Compatible with all Keurig K-Cup pods, it brews a cup in under 2 minutes. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Operation 6. Brewing Guide 7. Cleaning & Descaling 8. Care & Storage 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact design, One-touch button, Removable drip tray, 12 oz water reservoir, K-Cup pod compatibility, Power base with cord storage.

Feature	Description
One-touch button	Starts brewing cycle with a single press
Removable drip tray	Accommodates travel mugs up to 7 inches tall
12 oz water reservoir	Holds enough water for one large cup
K-Cup pod holder	Accepts all Keurig licensed K-Cup pods
Power base with cord wrap	For neat storage of power cord
Compact size	Fits in small spaces; less than 5 inches wide
Brew time	Brews a cup in under 2 minutes
Auto-off	Turns off 90 seconds after brew cycle completes
Travel mug friendly	Drip tray removes for taller mugs
Simple operation	No display; just add water, insert pod, and press button

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

Remove all packaging materials from inside and outside the brewer.
Place brewer on a flat, stable surface away from edges.
Ensure the drip tray is properly inserted.
Plug power cord into a standard 120V AC outlet.

WARNING! Keep away from water sources. Do not immerse in water. Ensure hands are dry when handling.

First-Time Use

Before first brew, perform a cleaning brew cycle.

Fill water reservoir with fresh cold water up to the 12 oz mark.
Do not insert a K-Cup pod. Place a mug on the drip tray.
Press the brew button to run water through the system. Discard this water.
Repeat once more with fresh water.
Your brewer is now ready for use.

CAUTION! Use only cold, fresh water. Do not use distilled or sparkling water.

Specifications

Dimensions: 4.8" W x 12.1" H x 11.3" D.
Weight: 4.5 lbs.
Water Reservoir: 12 oz capacity.
Power: 120V AC, 60Hz, 1470W.
Brew Time: Under 2 minutes per cup.
Cup Size Compatibility: 6, 8, 10, 12 oz (via pod selection).
Pod Compatibility: All Keurig licensed K-Cup pods.
Auto-off: 90 seconds after brew.
Warranty: 1-year limited warranty.

Controls and Operation

Single button control: Press to start brew cycle. LED indicator: Glows blue when power is on and brewer is ready.

Operation Steps:

Lift handle to open K-Cup pod compartment.
Insert a K-Cup pod. Close handle firmly.
Fill reservoir with desired amount of cold water (up to 12 oz).
Place mug on drip tray.
Press brew button. Blue LED will flash during brew.
Brewing completes when water stops flowing and LED stops flashing.

Note: For travel mugs, remove drip tray before placing mug.

Brewing Guide

Brew strength is determined by K-Cup pod. For stronger coffee, use a dark roast pod or brew a smaller cup size.

Select Pod: Choose any licensed K-Cup pod.
Add Water: Fill reservoir to desired cup size line (6, 8, 10, 12 oz).
Brew: Press button; brewer will dispense exact amount of water added.
Enjoy: Remove mug immediately after brewing completes.
Dispose Pod: Lift handle after brew cycle; used pod ejects into compartment. Dispose of pod.

Tip: Preheat mug with hot water for hotter coffee.

Cleaning & Descaling

Regular cleaning ensures optimal performance and taste.

Daily Cleaning: Wipe exterior with damp cloth. Empty drip tray and pod holder as needed.

Weekly Cleaning: Remove and wash drip tray, pod holder, and water reservoir with warm, soapy water. Rinse thoroughly.

Descaling: Perform every 3-6 months or when mineral build-up is noticed. Use Keurig Descaling Solution or vinegar solution (follow solution instructions). Run descaling cycle, then rinse with multiple cycles of fresh water.

WARNING! Unplug before cleaning. Do not use abrasive cleaners.

Care & Storage

Unplug and empty water reservoir before storing. Store in a dry place.

CAUTION! Never store with water in reservoir. Avoid extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. All rights reserved. Keurig, K-Mini, and K-Cup are trademarks of Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Ensure plug is securely in outlet; check outlet with another device.
No water flow	Empty reservoir/clog	Fill reservoir with water; check for clogs in needle; descale if needed.
Coffee is weak	Pod/water amount	Use fresh pod; ensure using correct amount of water for pod strength.
Brewer leaks	Loose parts/clog	Ensure reservoir and drip tray are properly seated; check for clogs.
Pod not punctured	Handle not closed	Ensure handle is fully closed; check for obstruction in pod compartment.
Blue LED not lighting	Power issue	Check power connection; unplug for 1 minute, then plug back in.

Reset: Unplug brewer for 1 minute, then plug back in.

Service: 1-866-901-2739; www.keurig.com