Keurig K-Mini Plus Single Serve Manual

The Keurig K-Mini Plus is a compact single-serve coffee maker designed for small spaces, featuring a 12 oz reservoir, multi-stream technology for optimal extraction, strong brew setting, removable drip tray for tall travel mugs, descale alert, energy-saving auto-off, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact brewer with 12 oz reservoir, Removable drip tray, Power button, Brew button, Strong button, Water reservoir, K-Cup pod holder, Drip tray.

Feature	Description
Multi-Stream Technology	Penetrates K-Cup pod for full flavor extraction
Strong Brew Setting	Increases brew strength for bolder coffee
Removable Drip Tray	Accommodates travel mugs up to 7 inches tall
Descale Alert	Indicator light prompts when descaling is needed
Energy-Saving Auto-Off	Turns off automatically 90 seconds after last brew
12 oz Reservoir	Holds enough water for one large cup
Power Button	Turns brewer on/off
Brew Button	Starts brewing process
Strong Button	Activates strong brew setting
K-Cup Pod Holder	Holds K-Cup pod during brewing

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

Remove packaging materials and stickers from brewer.
Wash removable parts (drip tray, reservoir) with warm, soapy water.
Place brewer on counter away from heat sources and water splashes.
Plug power cord into 120V AC outlet.

WARNING! Ensure brewer is unplugged during cleaning. Do not immerse brewer in water.

First-Time Use

Prime the brewer before first brew.

Fill reservoir with fresh, cold water to MAX line.
Place a mug on drip tray.
Press POWER to turn brewer on (light will blink).
Lift and close handle without inserting a K-Cup pod.
Press BREW button to run water through system (repeat 2-3 times).
Brewer is now ready for use.

CAUTION! Use only cold, filtered water. Do not use distilled water.

Specifications

Dimensions: 4.5" W x 12.1" H x 11.3" D.
Water Reservoir: 12 oz capacity.
Cup Size: Brews 6, 8, 10, or 12 oz.
Power: 120V AC, 60Hz, 1470W.
Auto-Off: 90 seconds after last brew.
Compatibility: All K-Cup pods.
Weight: 4.2 lbs.
Warranty: 1-year limited.

Controls and Settings

Front Panel: POWER button, BREW button, STRONG button, Descale light.

Operation: Press POWER to turn on (light solid). Add water, insert K-Cup, close handle, select cup size (press BREW repeatedly to cycle sizes: 6oz → 8oz → 10oz → 12oz). Press STRONG before brewing for bolder coffee. Press BREW to start.

Descale Alert: Light flashes when descaling is required.

Auto-Off: Brewer turns off 90 seconds after last brew to save energy.

Brewing Coffee

Brews 6, 8, 10, or 12 oz cups using K-Cup pods.

Press POWER to turn brewer on.
Fill reservoir with cold water to desired cup size line.
Place mug on drip tray.
Lift handle, insert K-Cup pod, close handle firmly.
Select cup size by pressing BREW button (cycles through sizes).
For stronger coffee, press STRONG button (light will illuminate).
Press BREW button to start brewing.
Remove mug after brewing completes.

Tip: For best results, use fresh, cold water and brew immediately after filling reservoir.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

Unplug brewer and allow to cool.
Remove and wash drip tray, reservoir, and K-Cup holder with warm, soapy water.
Wipe exterior with damp cloth; do not use abrasive cleaners.
Monthly: Run vinegar solution (50/50 water and vinegar) through brew cycle without K-Cup pod to clean internal parts.
Rinse by running multiple cycles of clean water.

WARNING! Never immerse brewer in water. Unplug before cleaning.

Descaling

Descale when light flashes or every 3-6 months.

Fill reservoir with 16 oz white vinegar and 16 oz water.
Place large mug on drip tray.
Press POWER, then BREW to start cycle (no K-Cup pod).
After half the solution brews, turn brewer off and wait 30 minutes.
Turn on and brew remaining solution.
Rinse by brewing 12 oz fresh water 3-4 times.
Descale light will turn off.

CAUTION! Use only Keurig descaling solution or white vinegar. Rinse thoroughly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. All rights reserved. Keurig, K-Mini, and K-Cup are trademarks of Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Check outlet; ensure plug is secure; press POWER button.
No water flow	Clogged needle/reservoir	Descale brewer; check reservoir for water; clean exit needle.
Weak coffee	Strong setting off/scale	Press STRONG button; descale brewer; use fresh water.
Leaking water	Loose parts/K-Cup damage	Ensure handle closed tightly; check K-Cup for damage; reseat reservoir.
Descale light on	Mineral buildup	Descale brewer following instructions.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-866-901-2739; www.keurig.com