Keurig K-Mini Owners Manual

The Keurig K-Mini is a compact single-serve coffee maker designed for small spaces, featuring one-touch brewing, a removable 12-ounce reservoir, compatibility with all K-Cup pods, a simple descaling process, auto-off functionality, and a travel mug friendly design. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Compact brewer body, Removable water reservoir, K-Cup pod holder, Drip tray, Power button, Brew button.

Unpacking and Setup

Remove all packaging materials. Place on clean, stable, level surface.

1. Remove tape and packaging: Check inside K-Cup holder for protective materials.
2. Wash removable parts: Rinse reservoir and drip tray with warm water.
3. Place drip tray: Ensure it's properly seated.
4. Fill reservoir: Remove, fill with fresh cold water, reinsert.
5. Plug into outlet: Use 120V AC power source.

WARNING! Do not use without water. Keep cord away from heated surfaces.

First-Time Use

Prime the brewing system before first brew.

1. Power on: Press POWER button; lights will illuminate.
2. Prime system: Without K-Cup pod, place mug, press BREW button to run water through.
3. Repeat priming: Run 2-3 full reservoirs to clear internal lines.
4. Insert K-Cup: Lift handle, insert pod, close firmly.
5. Brew first cup: Place mug, press BREW button.

CAUTION! Water will be hot. Do not touch during brew cycle.

Specifications

• Dimensions: 4.5" W x 12.1" H x 11.3" D.
• Water Reservoir: 12 oz removable.
• Brew Sizes: 6, 8, 10, 12 oz.
• Power: 120V AC, 60Hz, 1470W.
• Brew Time: Under 1 minute.
• Weight: 3.7 lbs.
• Cord Length: 30 inches.
• Warranty: 1-year limited.
• Compatibility: All K-Cup pod varieties.

Controls and Operation

Front panel: POWER button, BREW button, Descale indicator light.

Operation: Press POWER to turn on (lights illuminate). Add water to reservoir. Lift handle, insert K-Cup, close firmly. Place mug on drip tray. Press BREW button. Brewer will automatically turn off 90 seconds after cycle.

Brew Size Selection: Press and hold BREW button during brew to cycle through 6, 8, 10, 12 oz options. Release at desired size.

Brewing Instructions

For optimal coffee quality.

1. Fill reservoir: Use fresh cold water only.
2. Insert K-Cup: Lift handle, place pod in holder, close firmly.
3. Place mug: Ensure drip tray is properly positioned.
4. Select size: Default is last used size; hold BREW to change.
5. Start brew: Press BREW button; cycle completes automatically.
6. Remove pod: Lift handle after brewing; discard used pod.

Tip: Preheat mug with hot water for hotter coffee.

Cleaning and Maintenance

Regular cleaning ensures optimal performance.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Remove and wash reservoir, drip tray, K-Cup holder in warm soapy water.
3. Monthly: Clean needle that pierces K-Cup with paperclip (unplug first).
4. As needed: Descale when indicator light comes on.

CAUTION! Unplug before cleaning. Do not immerse brewer in water.

Descaling Procedure

Required every 3-6 months or when descale light illuminates.

1. Prepare solution: Mix Keurig descaling solution or white vinegar with equal water.
2. Fill reservoir: Pour solution into empty reservoir.
3. Start descale: Place large mug, press BREW without K-Cup.
4. Repeat: Continue until reservoir is empty.
5. Rinse: Fill reservoir with fresh water, run multiple cycles to flush.
6. Reset: Descale light will turn off after completion.

WARNING! Use only Keurig descaling solution or vinegar. Rinse thoroughly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 10 seconds, then replug.

Service: 1-866-901-2739; www.keurig.com