Keurig K-Mini Manual

The Keurig K-Mini is a compact single-serve coffee maker designed for small spaces, featuring one-touch brewing, a removable drip tray, a 6-12 oz brew size range, auto-off functionality, and compatibility with all Keurig K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Operation 6. Brewing Guide 7. Maintenance & Cleaning 8. Descaling 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact design, Removable drip tray, Water reservoir, K-Cup pod holder, Power button, Brew button.

Feature	Description
Compact design	Fits in small spaces, under 5 inches wide
Removable drip tray	Accommodates travel mugs up to 7 inches tall
Water reservoir	Integrated, holds up to 12 oz of water
K-Cup pod holder	Accepts all Keurig K-Cup pods
Power button	Turns brewer on/off
Brew button	Starts brewing cycle
Brew size selector	Adjusts brew strength (6 oz, 8 oz, 10 oz, 12 oz)
Auto-off	Turns off automatically after 90 seconds of inactivity
Energy saving mode	Reduces power consumption when not in use
Descale indicator	Alerts when descaling is needed

Installation & Setup

Unpack and inspect contents. Place on clean, level surface.

Remove packaging materials: Take off all tape and stickers.
Wash removable parts: Clean drip tray and water reservoir with warm, soapy water.
Place brewer: Ensure at least 4 inches clearance on all sides for ventilation.
Plug into outlet: Use 120V AC power outlet only.

WARNING! Do not use outdoors or near heat sources. Keep cord away from heated surfaces.

First-Time Use

Prime the brewer before first use.

Fill reservoir: Add fresh cold water up to MAX line.
Power on: Press POWER button; brewer will heat (approx. 3 minutes).
Prime system: Place a mug on drip tray, press BREW without K-Cup to run water through.
Repeat: Run 2-3 cycles of plain water to flush system.
Insert K-Cup: Lift handle, place pod in holder, close firmly.
Select brew size: Use button to choose desired ounce setting.
Brew: Press BREW button to start cycle.

CAUTION! Water and brewed beverage will be hot. Handle with care.

Specifications

Dimensions: 4.5" W x 12.1" H x 11.3" D.
Weight: 4.5 lbs.
Water Reservoir: 12 oz capacity.
Brew Sizes: 6, 8, 10, 12 oz.
Power: 120V AC, 60Hz, 1470W.
Brew Time: Under 2 minutes.
Auto-off: 90 seconds.
Compatibility: All Keurig K-Cup pods.
Warranty: 1-year limited.

Controls and Operation

Front panel: POWER button, BREW button, brew size indicator lights.

Operation: Press POWER to turn on (light illuminates). Add water if needed. Lift handle, insert K-Cup, close firmly. Place mug on drip tray. Select brew size (press brew size button to cycle through options). Press BREW to start. Brewer will automatically turn off 90 seconds after brew cycle completes.

Brew Size Selection: 6 oz (strong), 8 oz (medium), 10 oz (mild), 12 oz (light).

Brewing Guide

For optimal coffee quality.

Use fresh, cold water: Do not use distilled or softened water.
Preheat mug: Run hot water through empty mug before brewing.
Choose K-Cup: Select desired coffee, tea, or hot cocoa pod.
Insert properly: Ensure K-Cup is seated correctly in holder.
Select brew size: Smaller size = stronger brew; larger size = milder brew.
Start brew: Press BREW; cycle completes in 1-2 minutes.
Remove pod: Lift handle after brewing; discard used K-Cup.

Tip: For iced beverages, brew over ice using smaller brew size.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

Daily: Wipe exterior with damp cloth.
Weekly: Remove and wash drip tray and water reservoir.
Monthly: Clean needle that punctures K-Cup (use paper clip when unplugged).
As needed: Descale when indicator light comes on.

CAUTION! Unplug brewer before cleaning. Do not immerse in water.

Descaling

Required every 3-6 months to remove mineral buildup.

Prepare solution: Mix Keurig descaling solution with water per instructions.
Fill reservoir: Pour solution into water reservoir.
Start descale: Place large container on drip tray, press BREW repeatedly until reservoir empty.
Rinse: Fill reservoir with fresh water, brew multiple cycles until taste disappears.
Reset: Hold brew size button for 5 seconds to reset descale indicator.

WARNING! Use only Keurig descaling solution or vinegar-water mix. Rinse thoroughly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power cord/outlet	Check power connection; try different outlet; ensure POWER button pressed.
No water flow	Clogged needle/reservoir	Clean exit needle; ensure water in reservoir; run cleaning cycle.
Weak coffee	Brew size/mineral buildup	Select smaller brew size; descale brewer; use fresh K-Cup.
Leaking water	Improper K-Cup placement	Ensure K-Cup properly seated; check reservoir seal; clean drip tray.
Descale light on	Mineral buildup	Descale brewer following instructions; reset indicator.
Brewer stops mid-cycle	Overheating/low water	Unplug for 10 minutes; refill water reservoir; ensure ventilation.

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com