Keurig K-Mini K15 Manual

The Keurig K-Mini K15 is a compact single-serve coffee maker designed for small spaces, featuring a simple one-button operation, a 12oz reservoir, compatibility with all K-Cup pods, a removable drip tray, and an energy-saving auto-off function. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Operation 6. Brewing Guide 7. Cleaning & Descaling 8. Care & Storage 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact brewer body, Removable drip tray, K-Cup pod holder, Power button, Water reservoir.

Feature	Description
Compact Design	Fits in small spaces, under 5 inches wide
One-Touch Control	Single button for brewing
12oz Reservoir	Holds enough water for one large cup
K-Cup Pod Compatibility	Works with all Keurig licensed K-Cup pods
Removable Drip Tray	Accommodates travel mugs up to 7 inches tall
Energy Saving Auto-Off	Turns off 90 seconds after last brew
Power Cord Storage	Wrap cord around base for neat storage
Multi-Stream Needle	Extracts full flavor and aroma from K-Cup pods

Installation & Setup

Unpack and inspect contents. Place on a clean, stable, and level surface.

Remove all packaging materials and stickers from the brewer.
Place the brewer on a flat, stable surface near a power outlet.
Ensure the drip tray is properly inserted.
Plug the power cord into a standard 120V AC outlet.

WARNING! Do not use an extension cord. Ensure the brewer is placed away from heat sources and water splashes.

First-Time Use

Prime the brewer before first use to ensure optimal performance.

Fill the water reservoir with fresh, cold water up to the 12oz max line.
Place a large mug (at least 10oz) on the drip tray.
Press the power button to turn on the brewer. The button will flash.
Without inserting a K-Cup pod, press the brew button to run water through the system. Repeat this process 2-3 times to prime.
The brewer is now ready for brewing with a K-Cup pod.

CAUTION! Use only cold, fresh water. Do not use distilled, sparkling, or previously boiled water.

Specifications

Dimensions: 4.5" W x 12.1" H x 11.3" D.
Weight: 3.7 lbs.
Water Reservoir Capacity: 12 oz.
Cup Size Compatibility: Brews 6, 8, 10, and 12 oz.
Power: 120V AC, 60Hz, 1470W.
Auto-Off: 90 seconds after last brew.
Compatibility: All Keurig licensed K-Cup pods.
Warranty: 1-Year Limited Warranty.

Controls and Operation

Simple one-button operation. Front: Power/Brew button with indicator light.

Brewing Process:

Lift the handle to open the K-Cup pod holder.
Insert a K-Cup pod. Close the handle firmly.
Place a mug on the drip tray.
Press the power button to turn on (light will flash, then stay solid).
Press the button again to start brewing. The light will flash during brew cycle.
When brewing is complete, the light will turn off (auto-off in 90 seconds).

Note: The brewer does not have programmable cup sizes. Brew time varies by cup size selected (press and hold button to brew larger sizes).

Brewing Guide

For best results, follow these steps.

Always use fresh, cold water. Refill reservoir before each brew.
Choose your desired K-Cup pod flavor and variety.
For a 6oz or 8oz cup: Press brew button once and release immediately.
For a 10oz or 12oz cup: Press and hold the brew button. Release when desired amount is brewed.
Allow the brewer to complete its cycle. The drip will stop shortly after the button light turns off.
Remove mug promptly to avoid overflow if using the drip tray.

Tip: Preheat your mug with hot water for a hotter beverage.

Cleaning & Descaling

Regular cleaning ensures performance and longevity.

Daily: Wipe exterior with a damp cloth. Empty and rinse the drip tray and water reservoir.

Weekly: Clean the K-Cup pod holder assembly. Lift handle and remove any coffee grounds or residue.

Descaling (Every 3-6 months):

Fill reservoir with a descaling solution or white vinegar mixed with water (50/50).
Place a large mug on the drip tray.
Run multiple brew cycles (without a K-Cup) until reservoir is empty.
Rinse thoroughly by running multiple cycles with fresh water.

WARNING! Unplug brewer before cleaning. Never immerse in water.

Care & Storage

Unplug and allow to cool before cleaning or storing. Store in a dry place.

CAUTION! Do not use abrasive cleaners or scouring pads. Do not store with water in the reservoir.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. All rights reserved. Keurig, K-Mini, and K-Cup are trademarks of Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Check power outlet; ensure cord is plugged in firmly.
No water flow	Empty reservoir/air lock	Fill reservoir with water; prime the system (see First-Time Use).
Brew is too weak or too strong	Incorrect cup size setting	Adjust brew size by pressing/holding button; use recommended cup size for pod.
Brewer leaks water	Loose parts or clog	Ensure K-Cup holder is closed tightly; check for debris in needle; descale.
Light flashes rapidly	Overheating or error	Unplug brewer, wait 10 minutes, then plug back in. Ensure reservoir has water.
Pod not punctured	Handle not closed fully	Open and close handle firmly; ensure pod is seated correctly.

Reset: Unplug brewer for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com