Keurig K-Mini Go Manual

The Keurig K-Mini Go is a compact, single-serve coffee maker designed for portability and ease of use. It features a simple one-button operation, uses K-Cup pods, has a removable drip tray, and is powered by 120V AC. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Operation 6. Brewing Guide 7. Cleaning & Descaling 8. Storage & Travel 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact brewer body, Removable drip tray, K-Cup pod holder, Power button, Water reservoir, Travel lid.

Feature	Description
One-Touch Brewing	Simple button operation for brewing
K-Cup Pod Compatibility	Uses standard K-Cup pods (not included)
Removable Drip Tray	Accommodates travel mugs up to 7 inches tall
Compact Design	Portable, ideal for small spaces and travel
Water Reservoir	Holds enough water for one cup at a time
Travel Lid	Secures water in reservoir during transport
Power Button	Turns brewer on/off and initiates brew cycle
AC Power Cord	For electrical connection
Indicator Light	Shows power and brewing status

Installation & Setup

Unpack and inspect contents. Place on a stable, level surface.

Remove all packaging materials from inside and outside the brewer.
Wash the removable drip tray with warm, soapy water and dry thoroughly.
Place the drip tray back into position.
Plug the power cord into a standard 120V AC outlet.

WARNING! Ensure the brewer is unplugged during cleaning. Do not immerse the brewer in water.

First-Time Use

Before first brew, prime the system by running a water-only cycle.

Fill the water reservoir with fresh, cold water. Do not exceed the max fill line.
Place a mug on the drip tray.
Press the power button to begin the brew cycle without a K-Cup pod.
Discard the water from the mug. The brewer is now ready for use.

CAUTION! Use only cold water. Do not use distilled or carbonated water.

Specifications

Dimensions: Compact, portable design.
Brew Size: Single serve (6, 8, 10 oz options via K-Cup pod).
Power: 120V AC, 60Hz.
Compatibility: Works with most licensed K-Cup pods.
Reservoir Capacity: Holds water for one cup at a time.
Warranty: Limited 1-year warranty.
Weight: Lightweight for easy portability.

Controls and Operation

Operation is simple with one primary control.

Power/Brew Button: Press once to turn the brewer on (light illuminates). Press again with a K-Cup pod loaded and water in the reservoir to start the brew cycle. The light will flash during brewing and turn off when complete.

Loading a K-Cup Pod: Lift the handle, insert a K-Cup pod, and close the handle firmly until it snaps into place.

Brewing Guide

Follow these steps for a perfect cup every time.

Ensure the brewer is plugged in and the drip tray is in place.
Fill the water reservoir with cold water to your desired cup size.
Place a mug on the drip tray.
Lift the handle and insert a K-Cup pod. Close the handle firmly.
Press the power button. The brew cycle will begin automatically.
When brewing is complete, lift the handle to eject the used K-Cup pod.

Tip: For best results, use fresh, cold water and your favorite K-Cup pod.

Cleaning & Descaling

Regular cleaning ensures optimal performance and longevity.

Daily: Wipe the exterior with a damp cloth. Remove and wash the drip tray.

Weekly: Wash the K-Cup pod holder with warm, soapy water.

Descaling: Perform every 3-6 months using Keurig Descaling Solution or a vinegar solution (follow solution instructions). Run multiple water-only cycles after descaling to rinse.

CAUTION! Unplug the brewer before cleaning. Never use abrasive cleaners or scouring pads.

Storage & Travel

The K-Mini Go is designed for easy portability.

Ensure the brewer is completely cool, unplugged, and dry.
Empty the water reservoir completely.
Snap the travel lid onto the reservoir to prevent leaks.
Store in a carrying bag or safe location.

Note: Do not store with water in the reservoir.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Check that the power cord is securely plugged into the outlet and the brewer.
No water flow	Clogged needle	Unplug brewer. Use a paperclip to gently clear the exit needle in the K-Cup pod holder.
Light flashes, no brew	Overheating	Unplug brewer and let it cool for 15 minutes. Ensure water reservoir is filled with cold water.
Leaking water	Loose parts or overfilled reservoir	Ensure the drip tray and reservoir are correctly seated. Do not fill water above the max line.
Weak or small brew	Mineral buildup	Descale the brewer following the instructions in the Cleaning section.

Reset: Unplug the brewer for 2 minutes, then plug it back in.

Service: 1-866-901-2739; www.keurig.com