Keurig K-Express Single Serve Manual

The Keurig K-Express is a compact, single-serve coffee maker designed for quick and easy brewing. It features one-touch brewing, multiple cup sizes (6, 8, 10 oz), an energy-saving auto-off function, a removable drip tray for tall travel mugs, and a 48-ounce removable water reservoir. Compatible with all Keurig K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Initial Setup & First Use 3. Specifications 4. Controls and Indicators 5. Brewing Your Beverage 6. Maintenance & Descaling 7. Care & Cleaning 8. Regulatory Information 9. Troubleshooting

Features at a Glance

Key components: Brew chamber, Removable water reservoir, Drip tray with removable cover, Power button, Brew size buttons, Power cord.

Feature	Description
One-Touch Brewing	Simple button operation for fast brewing
Multiple Cup Sizes	Choose from 6, 8, or 10 oz brew sizes
Removable Water Reservoir	48 oz capacity, easy to fill and clean
Removable Drip Tray	Accommodates travel mugs up to 7.2 inches tall
Energy-Saving Auto-Off	Turns off automatically 90 seconds after last brew
K-Cup Pod Compatibility	Brews using any licensed K-Cup pod
Brew Temperature	Optimized temperature for great taste
Compact Design	Fits easily on countertops
Power Indicator Light	Illuminates when machine is on
Descale Indicator	Light alerts when descaling is needed

Initial Setup & First Use

Unpack and inspect all contents. Place on a clean, level, stable surface away from edges.

Remove all packaging materials and stickers from inside and outside the brewer.
Wash the removable water reservoir and drip tray cover with warm, soapy water. Rinse and dry thoroughly.
Fill the water reservoir with fresh, cold water and place it back into the brewer.
Plug the power cord into a standard 120V AC outlet.
Press the Power button to turn on. The Power light will illuminate.
Perform an initial water flush: Without a K-Cup pod, place a mug on the drip tray, press the 10 oz brew button, and let the cycle complete. Repeat 2-3 times.

WARNING! Do not use without water. Ensure the water reservoir is properly seated. Keep cord away from heated surfaces.

Specifications

Dimensions: 12.5" H x 9.8" W x 13.0" D.
Weight: 6.0 lbs.
Water Reservoir: 48 oz, removable.
Cup Sizes: 6 oz, 8 oz, 10 oz.
Power: 120V AC, 60Hz, 1470W.
Auto-Off: 90 seconds after last brew.
Compatibility: All Keurig-branded K-Cup pods.
Warranty: 1-year limited.
Operating Temp: 40°F - 95°F (4°C - 35°C).

Controls and Indicators

Front Panel: POWER button, 6 oz, 8 oz, 10 oz brew size buttons.

Indicator Lights: Power Light (white) - indicates brewer is on. Descale Light (red) - illuminates when mineral buildup requires descaling.

Operation: Press POWER to turn brewer on/off. Select desired brew size button (6, 8, or 10 oz) to begin brewing cycle. The brew button will flash during heating and brewing, then turn off when complete.

Brewing Your Beverage

Always use a clean mug. Ensure water reservoir has sufficient water.

Lift and lower the brew handle to open the K-Cup pod chamber.
Insert your chosen K-Cup pod. Close the handle firmly.
Place your mug (up to 7.2" tall) on the drip tray.
Press the desired brew size button (6, 8, or 10 oz). The button will flash.
Brewing will begin after a short heating period. The cycle completes automatically.
After brewing, lift the handle to eject the used K-Cup pod.

Tip: For a stronger brew, select a smaller cup size. Run a water-only brew cycle between different coffee types to clear previous flavors.

Maintenance & Descaling

Regular descaling maintains performance and extends brewer life. The Descale light will illuminate when required (approx. every 3-6 months).

Purchase Keurig Descaling Solution or approved white vinegar.
Fill the empty water reservoir with 16 oz of descaling solution and 16 oz of water.
Place a large mug (at least 20 oz) on the drip tray.
Press POWER to turn brewer on. Press and hold the 8 oz and 10 oz buttons simultaneously for 3 seconds to enter descale mode.
Press the 10 oz brew button to start the descaling cycle. Repeat until "Add Water" light appears.
Rinse reservoir thoroughly, refill with fresh water, and run multiple water-only brew cycles to rinse the system.
Exit descale mode by pressing POWER.

CAUTION! Use only Keurig Descaling Solution or white vinegar. Do not use other cleaners.

Care & Cleaning

Unplug brewer and allow to cool before cleaning.

Exterior: Wipe with a soft, damp cloth. Do not use abrasive cleaners or immerse in water.
Water Reservoir & Drip Tray: Remove and wash weekly with warm, soapy water. Rinse and dry before replacing.
Brew Chamber: Wipe with a damp cloth. Do not insert objects into the needle.
Drip Tray Piercer: Clean with a paperclip if clogged.

CAUTION! Never immerse brewer base, cord, or plug in water or other liquids.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. All rights reserved. Keurig, K-Express, K-Cup are trademarks of Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Ensure cord is plugged in; check outlet; press POWER button.
No water flow / small cup	Clogged needle/reservoir	Check water reservoir is seated; clean exit needle with paperclip; descale.
Brewer leaks water	Loose reservoir/overfilled mug	Ensure reservoir is locked; use correct mug size; check for cracks.
Coffee not hot enough	Cold mug/room temp water	Preheat mug with hot water; ensure brewer has completed heating cycle.
Descale light is on	Mineral buildup	Perform descaling procedure as outlined in Section 7.
Brewer stops mid-cycle	Overheating/low water	Unplug for 10 mins to reset; refill water reservoir.

Reset: Unplug brewer for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com