Keurig K Express Manual

The Keurig K Express is a single-serve coffee maker designed for quick and easy brewing. It features one-touch operation, multiple cup sizes (6, 8, 10, 12 oz), an energy-saving auto-off function, a removable drip tray for tall travel mugs, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Brewing Your Beverage 7. Maintenance and Cleaning 8. Descaling 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Water Reservoir, K-Cup Pod Holder, Drip Tray, Power Button, Brew Size Buttons, Power Cord.

Feature	Description
One-Touch Brewing	Simple button operation for quick coffee
Multiple Cup Sizes	Brew 6, 8, 10, or 12 oz cups
Energy-Saving Auto-Off	Turns off automatically after 90 seconds of inactivity
Removable Drip Tray	Accommodates travel mugs up to 7.2 inches tall
K-Cup Pod Compatibility	Works with all licensed K-Cup pods
Water Reservoir	42 oz removable reservoir for easy filling
Power Indicator Light	Blue light indicates power status
Brew Button Lights	LED indicators for selected brew size

Unpacking and Setup

Remove all packaging materials. Place brewer on a stable, level surface.

Remove packaging: Take brewer and components out of box; discard plastic bags.
Wash reservoir: Remove water reservoir, wash with warm soapy water, rinse, and dry.
Position brewer: Place on counter away from edges, sinks, and heat sources.
Plug in: Connect power cord to outlet.

WARNING! Handle with care. Do not immerse brewer in water. Keep cord away from heated surfaces.

First-Time Use

Prime the brewer before first brew.

Fill reservoir: Lift reservoir, fill with fresh cold water, replace securely.
Power on: Press POWER button; blue light will illuminate.
Prime: Place a mug on drip tray. Lift and close handle without a K-Cup pod. Select largest brew size (12 oz) and press brew button. Discard water.
Repeat: Prime with a second full reservoir of water.

CAUTION! Use only cold, fresh water. Do not use distilled water.

Specifications

Dimensions: 13.4" H x 9.8" W x 13.2" D.
Weight: 5.5 lbs.
Water Reservoir Capacity: 42 oz.
Brew Sizes: 6, 8, 10, 12 oz.
Power: 120V AC, 60Hz, 1470W.
Auto-Off: 90 seconds.
Cord Length: 30 inches.
Warranty: 1-year limited.

Controls and Indicators

Front Panel: POWER button (blue light), 6 oz, 8 oz, 10 oz, 12 oz brew size buttons (LED indicators).

Operation: Press POWER to turn on/off. Select brew size by pressing corresponding button (light will illuminate). Press selected button again to start brew cycle.

Indicator Lights: Blue power light indicates brewer is on. Flashing brew button indicates heating/brewing in progress. Solid brew button light indicates ready to brew.

Brewing Your Beverage

Brew with any licensed K-Cup pod.

Power on: Press POWER button; wait for blue light.
Place mug: Put mug on drip tray (remove tray for tall mugs).
Insert pod: Lift handle, place K-Cup pod in holder, close handle firmly.
Select size: Press desired brew size button (6, 8, 10, or 12 oz).
Start brew: Press same button again; brewing begins.
Enjoy: Brew completes automatically; discard used pod.

Tip: For stronger coffee, select smaller brew size. Do not use reusable pods unless specified compatible.

Maintenance and Cleaning

Regular cleaning ensures optimal performance.

Exterior: Wipe with damp cloth; do not use abrasive cleaners.
Drip tray and reservoir: Remove, wash with warm soapy water weekly.
Pod holder assembly: Lift handle, remove funnel, wash with warm soapy water.
Needle: Check for clogs; clear with paper clip if necessary (unplug first).

CAUTION! Unplug brewer before cleaning. Never immerse brewer in water.

Descaling

Descale every 3-6 months to remove mineral buildup.

Prepare solution: Mix Keurig Descaling Solution with equal parts water in reservoir.
Start descale: Place large mug on tray. Power on, lift and close handle without pod. Press 12 oz button twice to start cycle.
Repeat: Refill reservoir with fresh water. Repeat brew cycle (without pod) until reservoir empty.
Rinse: Wash reservoir thoroughly; fill with fresh water and run multiple brew cycles to rinse.

WARNING! Use only Keurig Descaling Solution or approved descaling agents.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power cord/outlet	Ensure cord plugged in; try different outlet; check power button.
No water flow	Clogged needle/reservoir	Check water reservoir seated; clear needle with paper clip (unplugged).
Incomplete brew	Mineral buildup	Descale brewer; ensure water reservoir full.
Leaking water	Loose components	Ensure reservoir, drip tray, pod holder properly seated.
Weak or cold coffee	Heating system	Descale; ensure brewer fully heated (blue light solid).

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-866-901-2739; www.keurig.com