Keurig K Express Coffee Maker Manual

The Keurig K Express is a single-serve coffee maker designed for quick and easy brewing. It features one-touch operation, a removable drip tray for travel mugs, an energy-saving auto-off function, and compatibility with most K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brew chamber, Removable drip tray, Water reservoir, Power button, Brew button, Indicator lights.

Installation & Setup

Unpack and inspect contents. Place on clean, level surface.

1. Remove all packaging materials from inside and outside brewer.
2. Wash removable parts: Drip tray and water reservoir with warm, soapy water.
3. Place drip tray in position.
4. Fill water reservoir with fresh cold water and place back on brewer.
5. Plug power cord into 120V AC outlet.

WARNING! Do not use without water. Ensure brewer is on stable surface away from edges.

First-Time Use

Prime the brewing system before first use.

1. Press POWER button to turn brewer on. Power light will blink while heating.
2. When power light turns solid, lift and close handle without inserting K-Cup pod.
3. Place mug on drip tray.
4. Press BREW button to run water through system. Discard this water.
5. Repeat process 2-3 times to prime system fully.

CAUTION! Water will be hot. Keep hands clear during brewing cycle.

Specifications

• Dimensions: 12.5" H x 5.5" W x 13.2" D.
• Weight: 5.5 lbs.
• Water Reservoir: 48 oz removable.
• Power: 120V AC, 60Hz, 1470W.
• Cup Sizes: 6, 8, 10, 12 oz.
• Auto-Off: 2 minutes.
• Compatibility: Most licensed K-Cup pods.
• Warranty: 1-year limited.

Controls and Operation

Front Panel: POWER button, BREW button, Power light, Ready light.

Operation: Press POWER to turn on. Power light blinks during heating, turns solid when ready. Lift handle, insert K-Cup pod, close handle. Place mug. Press BREW to start. Brewer will automatically dispense selected amount.

Brew Size Selection: Press and hold BREW button during brewing to cycle through sizes (6, 8, 10, 12 oz). Release at desired size. Brewer will remember setting for next brew.

Brewing Instructions

For optimal coffee every time.

1. Ensure brewer is on and ready (solid power light).
2. Lift handle to open brew chamber.
3. Insert K-Cup pod (any orientation).
4. Close handle firmly.
5. Place mug or travel cup on drip tray.
6. Press BREW button. Brewing begins immediately.
7. When brewing completes, lift handle to eject used pod.
8. Discard pod and close handle.

Tip: For stronger coffee, select smaller brew size. Use fresh, cold water for best taste.

Cleaning & Descaling

Regular cleaning ensures optimal performance.

Daily: Wipe exterior with damp cloth. Empty drip tray and wash with warm, soapy water.

Weekly: Remove and wash water reservoir. Clean brew chamber with damp cloth.

Descaling: Required every 3-6 months depending on water hardness.

1. Fill reservoir with 48 oz white vinegar or Keurig descaling solution.
2. Run brew cycles without K-Cup pod until reservoir is empty.
3. Rinse reservoir thoroughly and fill with fresh water.
4. Run multiple brew cycles with fresh water to rinse system.

WARNING! Unplug before cleaning. Never immerse brewer in water.

Care & Maintenance

Unplug when not in use for extended periods. Store in dry place.

CAUTION! Do not use abrasive cleaners. Do not put any part in dishwasher unless specified.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com