Keurig K Elite User Manual

The Keurig K Elite is a single-serve coffee maker featuring a 75 oz. removable water reservoir, strong brew setting, iced coffee capability, programmable auto on/off, descale indicator, and compatibility with all K-Cup pod sizes. It offers multiple brew sizes (4, 6, 8, 10, 12 oz) and a hot water dispenser. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Removable water reservoir, drip tray, K-Cup pod holder, control panel, power button, brew size buttons, strong brew button, iced button, hot water button.

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

1. Remove packaging materials and stickers.
2. Wash removable parts: reservoir and drip tray with warm soapy water.
3. Place drip tray in position.
4. Fill water reservoir with fresh cold water and insert into brewer.
5. Plug into 120V AC outlet.

WARNING! Ensure brewer is on a heat-resistant surface away from edges. Keep away from children.

First-Time Use

Prime the brewer before first brew.

1. Power on: Press POWER button; lights will illuminate.
2. Prime: Without a K-Cup pod, place a mug, select largest brew size (12 oz), and start brew cycle. Repeat 2-3 times.
3. Insert K-Cup: Lift handle, insert pod, close firmly.
4. Select brew size and press brew button.
5. Program auto on/off: Hold PROGRAM button to set time.

CAUTION! Water will be hot. Do not touch during brew cycle.

Specifications

• Dimensions: 13.5" H x 10.5" W x 15.3" D.
• Water Reservoir: 75 oz removable.
• Power: 120V AC, 60Hz, 1500W.
• Brew Sizes: 4, 6, 8, 10, 12 oz.
• Brew Time: Under 1 minute per cup.
• Compatibility: All Keurig K-Cup pods.
• Weight: 8.5 lbs.
• Warranty: 1-year limited.

Controls and Settings

Control Panel: POWER, 4oz, 6oz, 8oz, 10oz, 12oz, STRONG, ICED, HOT WATER, PROGRAM.

Functions: Press brew size to select; STRONG for bold coffee; ICED for iced coffee; HOT WATER for hot water; PROGRAM to set auto on/off.

Settings: Auto off (2 hr default), programmable start time, descale alert (flashing light), energy saver mode.

Brewing Coffee

For hot coffee, iced coffee, or strong brew.

1. Ensure water reservoir is filled.
2. Power on brewer; wait for ready light.
3. Lift handle, insert K-Cup pod, close firmly.
4. Place mug on drip tray.
5. Select brew size (4-12 oz).
6. For strong coffee: Press STRONG before brew.
7. For iced coffee: Press ICED, add ice to mug, then brew.
8. Press brew button; cycle completes automatically.

Tip: Use filtered water for better taste and to reduce descaling frequency.

Using Hot Water Feature

Dispenses hot water without a pod.

1. Ensure brewer is on and ready.
2. Place mug under dispenser.
3. Press HOT WATER button.
4. Select desired water amount (4-12 oz).
5. Press brew button to dispense.

WARNING! Water is near boiling. Handle with care.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

1. Daily: Empty drip tray and wash.
2. Weekly: Wash water reservoir and K-Cup holder.
3. Monthly: Run water-only brew cycles to flush.
4. Descaling: When indicator lights, use Keurig descaling solution or vinegar mix.

CAUTION! Unplug before cleaning. Never immerse brewer in water.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. UL listed. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com