Keurig K Elite K90 Owner Manual

The Keurig K Elite K90 is a premium single-serve coffee maker featuring a 75 oz. removable water reservoir, strong brew setting, iced coffee capability, hot water on demand, programmable auto on/off, digital clock with temperature display, descale indicator, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Hot Water Feature 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital display with clock, 75 oz. removable water reservoir, drip tray, K-Cup pod holder, water filter holder, power button, brew size buttons, strong brew button, iced coffee button, hot water button.

Feature	Description
75 oz. Water Reservoir	Removable for easy filling and cleaning
Strong Brew	Increases strength and boldness of coffee
Iced Coffee	Brews over ice without diluting flavor
Hot Water on Demand	Dispenses hot water for tea, soup, etc.
Programmable Auto On/Off	Set brew times and automatic shut-off
Digital Display	Shows time, temperature, and alerts
Descale Indicator	Alerts when descaling is needed
Brew Size Options	4 oz., 6 oz., 8 oz., 10 oz., 12 oz.
Compatibility	Works with all K-Cup pod varieties
Energy Saving Mode	Reduces power consumption when idle

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

Remove all packaging materials from inside and outside the brewer.
Wash removable parts: reservoir, drip tray, and K-Cup holder with warm soapy water.
Insert charcoal water filter into reservoir (soak filter 5 minutes first).
Fill reservoir with cold water and place back on brewer.
Plug power cord into 120V outlet.

WARNING! Do not use without water. Ensure brewer is on a heat-resistant surface away from edges.

First-Time Use

Prime the system before first brew.

Power on: Press POWER button; display will light up.
Prime: Without a K-Cup, place a mug, select largest brew size (12 oz.) and start brew cycle. Repeat 3 times.
Set clock: Use +/- buttons to adjust time on display.
Set auto on/off: Press PROGRAM to set automatic start/stop times.
Brew first cup: Insert K-Cup, select brew size, and press brew button.

CAUTION! Water will be hot. Keep hands clear during brew cycle.

Specifications

Dimensions: 13.5" H x 10.2" W x 13.0" D.
Water Reservoir: 75 oz. removable.
Power: 120V AC, 60Hz, 1470W.
Brew Sizes: 4, 6, 8, 10, 12 oz.
Brew Time: Under 1 minute per cup.
Temperature: Brews at 192°F optimal temperature.
Compatibility: All Keurig K-Cup pods.
Display: Digital clock with temperature readout.
Warranty: 1-year limited.

Controls and Settings

Front Panel: POWER, BREW SIZE (4,6,8,10,12 oz), STRONG, ICED, HOT WATER, PROGRAM, +/- buttons.

Display Indicators: Clock, ready status, heating, add water, descale, auto on/off.

Settings: Clock adjustment, auto on/off programming (set start/stop times), strong brew toggle, temperature display (F/C). Maintenance: Filter reminder, descale alert, energy saving mode activation.

Brewing Coffee

For hot coffee, iced coffee, or strong brew.

Power on: Ensure brewer is on and ready light is solid.
Lift handle: Insert K-Cup pod into holder, close handle firmly.
Place mug: On drip tray (remove for travel mugs).
Select brew size: Press desired oz. button.
Optional: Press STRONG for bolder coffee or ICED for iced coffee setting.
Start brew: Press same brew size button again to begin.
Remove pod: After brewing, lift handle to eject used K-Cup.

Tip: For stronger coffee, use STRONG setting or smaller brew size.

Hot Water Feature

Dispenses hot water without a K-Cup pod.

Ensure brewer is on and ready.
Place cup or container under spout.
Press HOT WATER button.
Select desired water amount (4-12 oz).
Press HOT WATER again to start dispensing.

WARNING! Water is near boiling. Use caution.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

Daily: Empty drip tray and used pod holder.
Weekly: Wash removable parts (reservoir, drip tray, holder) with warm soapy water.
Monthly: Replace water filter (every 2 months or 60 tank refills).
Descaling: When descale light appears, run descaling solution or vinegar solution through brew cycle.

CAUTION! Unplug before cleaning. Never immerse brewer in water.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check plug and outlet; ensure power button is pressed.
No water flow	Clogged needle/empty reservoir	Check water level; clean exit needle with paperclip.
Weak or cold coffee	Descaling needed	Run descaling procedure; check water temperature setting.
Leaking water	Loose reservoir or clog	Ensure reservoir seated properly; check for obstructions.
Descale light on	Mineral buildup	Descale immediately following manual instructions.
Error messages	Various	Unplug for 2 minutes, then restart; consult manual.

Reset: Unplug for 2 minutes to reset system.

Service: 1-866-901-2739; www.keurig.com