Keurig K-Elite Instructions Manual

The Keurig K-Elite is a single-serve coffee maker featuring a 75 oz. water reservoir, 5 brew sizes (4 oz., 6 oz., 8 oz., 10 oz., 12 oz.), Strong Brew option, Iced setting, programmable auto on/off, hot water on demand, removable drip tray for tall travel mugs, descale indicator, and energy saving mode. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Using Hot Water on Demand 8. Maintenance & Cleaning 9. Descaling 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Large 75 oz. water reservoir, Multi-stream technology, 5 brew sizes, Strong Brew button, Iced button, Programmable auto on/off, Hot water on demand, Removable drip tray, Descaling indicator.

FeatureDescription
Water Reservoir75 oz. capacity, removable for easy filling
Brew Sizes4 oz., 6 oz., 8 oz., 10 oz., 12 oz.
Strong BrewIncreases strength and boldness of coffee
Iced SettingBrews over ice without diluting flavor
ProgrammableSet auto on/off times for energy saving
Hot Water on DemandDispenses hot water without a K-Cup pod
Removable Drip TrayAccommodates travel mugs up to 7.2 inches
Descale IndicatorAlerts when descaling is needed
Energy Saving ModeTurns off after 2 hours of inactivity
Power ButtonTurns brewer on/off

Installation & Setup

Unpack and inspect contents. Place on a clean, level, stable surface away from water sources and heat.

  1. Remove packaging materials and stickers from brewer and water reservoir.
  2. Wash water reservoir with warm, soapy water, rinse thoroughly, and dry.
  3. Place water reservoir onto the back of the brewer, ensuring it is fully seated.
  4. Plug power cord into a 120V AC outlet.
  5. Fill reservoir with fresh, cold water.

WARNING! Do not use without water. Ensure brewer is on a stable, level surface to prevent tipping.

First-Time Use

Prime the brewing system before first use.

  1. Power on: Press POWER button. Lights will illuminate.
  2. Lift and close the handle without a K-Cup pod to open the needle.
  3. Place a large mug (12 oz. or more) on the drip tray.
  4. Select the 12 oz. brew size and press BREW button. Hot water will dispense.
  5. Repeat this process 3 times to fully prime the system.
  6. Your brewer is now ready for use.

CAUTION! Water will be hot. Do not touch during priming process.

Specifications

Controls and Settings

Control Panel: POWER, 5 Brew Size buttons (4,6,8,10,12 oz.), STRONG, ICED, HOT WATER.

Programming Auto On/Off: Press and hold the 4 oz. and 10 oz. buttons simultaneously for 3 seconds. Use brew size buttons to set hour and minute for auto on. Repeat for auto off time. Press POWER to save.

Strong Brew: Press STRONG button before brewing for a bolder, more robust cup.

Iced Setting:Press ICED button before brewing to optimize brew for iced beverages.

Hot Water on Demand: Press HOT WATER button to dispense hot water without a pod.

Brewing Coffee

Brews a perfect cup in under a minute.

  1. Power on brewer. Wait for READY light.
  2. Lift handle, insert a K-Cup pod, close handle firmly.
  3. Place mug on drip tray.
  4. Select desired brew size (4,6,8,10,12 oz.).
  5. For stronger coffee, press STRONG button.
  6. For iced coffee, press ICED button.
  7. Press the illuminated BREW button. Brewing begins.
  8. When brewing is complete, lift handle to eject the used pod.

Tip: For best results, use fresh, cold water and Keurig branded K-Cup pods.

Using Hot Water on Demand

Dispense hot water for tea, hot chocolate, or oatmeal.

  1. Ensure brewer is on and READY light is illuminated.
  2. Place mug on drip tray.
  3. Press HOT WATER button. Select desired size (8, 10, or 12 oz.).
  4. Press the illuminated BREW button. Hot water will dispense.

WARNING! Water is hot. Use caution to avoid burns.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and taste.

CAUTION! Always unplug brewer before cleaning any internal parts.

Descaling

Descaling removes mineral buildup. The DESCALE light will illuminate when needed (approx. every 3-6 months).

  1. Empty water reservoir. Fill with 16 oz. of white vinegar and 16 oz. of water.
  2. Place a large mug on the drip tray.
  3. Press and hold 8 oz. and 12 oz. buttons for 3 seconds to start descale mode.
  4. Press HOT WATER button. Brew button will flash.
  5. Press BREW button. It will dispense half the solution, then pause for 30 minutes.
  6. After pause, press BREW again to dispense remaining solution.
  7. Rinse reservoir thoroughly. Fill with fresh water and run multiple brew cycles (without a pod) until vinegar smell is gone.

WARNING! Use only Keurig descaling solution or white vinegar. Do not use other descalers.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. All rights reserved. Keurig, K-Elite, K-Cup are trademarks of Keurig Green Mountain, Inc. For support, visit support.keurig.com or contact 1-866-901-2739.

Troubleshooting

SymptomPossible CauseCorrective Action
Brewer won't turn onNo powerCheck power cord connection; ensure outlet is working.
No water flow/slow brewClogged needle/air lockUnplug, clean exit needle with paper clip; prime system.
Brewer leaks waterLoose reservoir/tank punctureEnsure reservoir is fully seated; check for cracks.
Coffee not hot enoughCold mug/pre-heatPre-heat mug with hot water; ensure brewer is ready.
DESCALE light onMineral buildupPerform descaling procedure (Section 10).
Small cup brewedAuto-off activatedBrewer may have entered energy saving mode. Power on again.

Reset: Unplug brewer for 2 minutes, then plug back in.

Service: 1-866-901-2739; support.keurig.com

Keurig K-Elite Instructions Manual © - All Rights Reserved 2025