Keurig K-Elite C Manual

The Keurig K-Elite C is a single-serve coffee maker with a 75 oz. water reservoir, 5 brew sizes (4 oz., 6 oz., 8 oz., 10 oz., 12 oz.), Strong Brew option, Iced setting, programmable auto on/off, descale indicator, removable drip tray for tall travel mugs, and energy saving mode. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Initial Setup 3. Brewing Your First Cup 4. Specifications 5. Controls and Settings 6. Using Advanced Features 7. Cleaning & Maintenance 8. Descaling 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 75 oz. removable water reservoir, LCD display with clock, brew size buttons, STRONG button, ICED button, programmable auto on/off, removable drip tray, descale indicator, energy saving mode.

Feature	Description
Water Reservoir	75 oz. capacity, removable for easy filling
Brew Sizes	5 sizes: 4 oz., 6 oz., 8 oz., 10 oz., 12 oz.
Strong Brew	Increases strength and boldness of coffee
Iced Setting	Brews over ice without diluting flavor
Programmable Auto On/Off	Set brew time in advance; auto shut-off after 2 hours
Descale Indicator	Alerts when descaling is needed
Removable Drip Tray	Accommodates travel mugs up to 7.2 inches tall
Energy Saving Mode	Reduces energy consumption when not in use
LCD Display	Shows clock, brew size, and status messages
Power	120V AC, 60Hz, 1470 watts

Initial Setup

Unpack and inspect contents. Place on stable, level surface.

Remove packaging materials and stickers.
Wash removable parts: reservoir and drip tray with warm, soapy water.
Fill reservoir with fresh water and place back on brewer.
Plug into grounded 120V outlet.
Prime the brewer: lift and close handle without a K-Cup pod, place mug, select largest brew size (12 oz.) and brew until reservoir is empty. Repeat 2-3 times.

WARNING! Do not use without priming. Ensure hands are dry when handling plug.

Brewing Your First Cup

After priming, brewer is ready for first beverage.

Fill reservoir with desired amount of water.
Lift handle, insert K-Cup pod, close handle firmly.
Place mug on drip tray (remove tray for tall mugs).
Select brew size (4, 6, 8, 10, or 12 oz.).
Press brew button; brewing begins after preheating.
For stronger coffee, press STRONG before brewing.
For iced drinks, press ICED before brewing.

CAUTION! Hot surfaces; avoid contact during and after brewing.

Specifications

Dimensions: 13.1" H x 10.2" W x 13.0" D.
Water Reservoir: 75 oz. removable.
Brew Sizes: 4, 6, 8, 10, 12 oz.
Power: 120V AC, 60Hz, 1470W.
Weight: 8.8 lbs.
Warranty: 1-year limited.
Compatibility: All Keurig K-Cup pods.
Display: Backlit LCD with clock.
Special Features: Strong Brew, Iced setting, programmable auto on/off.

Controls and Settings

Control panel includes: Power button, Brew Size buttons (4, 6, 8, 10, 12 oz.), STRONG button, ICED button, Menu button for settings.

LCD Display: Shows time, selected brew size, "Add Water," "Descale," and other alerts.

Settings Menu: Press Menu to access: Auto On/Off (set brew time), Clock set, Energy Saving mode (On/Off), Factory Reset.

Brewing Options: Default brew temperature is 192°F. STRONG increases temperature and brew time. ICED lowers temperature and adjusts brew cycle for iced beverages.

Using Advanced Features

Strong Brew: Press STRONG button before brewing for bolder coffee. Icon lights on display.

Iced Setting: Press ICED button before brewing for optimal iced coffee or tea. Brews a stronger concentration over ice.

Programmable Auto On/Off: Set brewer to turn on at specific time via Menu > Auto On. Auto shut-off occurs after 2 hours of inactivity.

Energy Saving Mode: Enable in Menu to reduce power consumption when idle.

Cleaning & Maintenance

Regular cleaning ensures optimal performance.

Daily: Wipe exterior with damp cloth; empty drip tray and used pod holder.
Weekly: Remove and wash water reservoir, drip tray, and pod holder in warm, soapy water.
Monthly: Clean needle: unplug, lift handle, use paperclip to clear entrance and exit needles.
Descaling: Perform when descale indicator lights (every 3-6 months).

CAUTION! Unplug before cleaning. Do not immerse brewer in water.

Descaling

Descaling removes mineral buildup from internal components.

Purchase Keurig Descaling Solution or approved white vinegar.
Fill reservoir with 16 oz. descaling solution and 16 oz. water.
Place large mug (at least 20 oz.) on drip tray.
Press Menu, select Descale, follow on-screen prompts.
Brew until "Add Water" appears.
Rinse reservoir, fill with fresh water, and brew multiple cycles until solution taste is gone.

WARNING! Descaling solution is acidic; avoid contact with skin and eyes.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. All rights reserved. Keurig, K-Elite, and K-Cup are trademarks of Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Ensure plug is securely in outlet; check power source.
No water flow	Clogged needle/reservoir	Clean needles; ensure reservoir is seated properly and filled.
Weak or small brew	Mineral buildup	Descale brewer; check water reservoir level.
Leaking water	Loose parts	Ensure reservoir, drip tray, and pod holder are properly installed.
Descale light on	Mineral buildup	Perform descaling procedure.
Coffee not hot enough	Preheating incomplete	Run water-only brew cycle to preheat; ensure STRONG mode is off if not needed.

Reset: Unplug for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com