Keurig K Elite C Coffee Maker Manual

The Keurig K Elite C is a single-serve coffee maker featuring a 75 oz. water reservoir, strong brew setting, iced coffee capability, hot water on demand, programmable auto on/off, digital clock, brew size options (4, 6, 8, 10, 12 oz), descale indicator, removable drip tray for tall travel mugs, and compatibility with all Keurig K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Hot Water on Demand 8. Maintenance & Cleaning 9. Descaling 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 75 oz. water reservoir, Control Panel with digital display, K-Cup pod holder, Drip Tray, Hot Water on Demand button, Strong Brew button, Iced Coffee setting.

Feature	Description
Water Reservoir	75 oz. capacity, removable for easy filling
Strong Brew	Increases brew temperature and time for bolder coffee
Iced Coffee	Brews over ice without diluting flavor
Hot Water on Demand	Dispenses hot water without inserting a pod
Programmable Auto On/Off	Set brew times and automatic shut-off
Brew Size Options	4, 6, 8, 10, 12 oz cup sizes
Digital Clock	Displays time and auto on/off settings
Descale Indicator	Alerts when descaling is needed
Removable Drip Tray	Accommodates travel mugs up to 7.2 inches
Energy Saver Mode	Automatically enters low-power mode after 2 hours

Installation & Setup

Unpack and inspect contents. Place on stable, level surface away from heat sources and water.

Remove packaging materials and stickers.
Wash water reservoir and drip tray with warm, soapy water; rinse thoroughly.
Place drip tray in position; insert water reservoir firmly into back of brewer.
Plug power cord into 120V AC outlet.

WARNING! Do not use without water. Ensure brewer is on a dry, stable surface.

First-Time Use

Prime the brewer before first use.

Fill water reservoir with fresh, cold water to MAX line.
Place a large mug on drip tray.
Lift and close handle without inserting a K-Cup pod.
Select largest brew size (12 oz) and press BREW button to run water through system.
Repeat process 2-3 times to prime.
Brewer is now ready for first cup.

CAUTION! Water will be hot. Keep hands clear during brew cycle.

Specifications

Dimensions: 13.5" H x 10.5" W x 13.2" D.
Water Reservoir: 75 oz. removable.
Power: 120V AC, 60Hz, 1470W.
Brew Sizes: 4, 6, 8, 10, 12 oz.
Brew Time: Under 1 minute per cup.
Compatibility: All Keurig K-Cup pods.
Display: Digital clock with backlight.
Warranty: 1-year limited.
Weight: 9.5 lbs.

Controls and Settings

Control Panel: POWER button, BREW button, STRONG button, ICED button, HOT WATER button, Brew Size buttons (4,6,8,10,12 oz), MENU button.

Menu Settings: Press MENU to access: Auto On (set time), Auto Off (2 hr default), Clock Set, Descaling mode, Factory Reset.

Brew Temperature: Adjustable via STRONG setting. Clock: Set 12/24 hour format. Energy Saver: Auto-off after 2 hours (adjustable).

Brewing Coffee

For hot coffee using K-Cup pods.

Ensure water reservoir is filled.
Place mug on drip tray.
Lift handle, insert K-Cup pod, close handle firmly.
Select brew size (4-12 oz).
For stronger coffee, press STRONG button before brewing.
Press BREW button; cycle completes in under 1 minute.
For iced coffee: Press ICED button, fill mug with ice to line, brew over ice.

Tip: Use filtered water for better tasting coffee and to reduce mineral buildup.

Hot Water on Demand

Dispenses hot water for tea, cocoa, oatmeal, etc.

Place mug on drip tray.
Press HOT WATER button.
Select desired water amount (4-12 oz).
Press BREW to dispense.
No K-Cup pod required.

WARNING! Water is near boiling. Use caution.

Maintenance & Cleaning

Weekly cleaning recommended.

Unplug brewer and let cool.
Remove and wash water reservoir, lid, and drip tray in warm, soapy water.
Wipe exterior with damp cloth; do not immerse in water.
Clean needle: Use paper clip to clear pod holder entry needle (unplugged).
Run water-only brew cycle monthly to flush system.

CAUTION! Never use abrasive cleaners or immerse brewer in water.

Descaling

Descale when indicator light appears or every 3-6 months.

Fill reservoir with descaling solution or white vinegar/water mix.
Place large container on drip tray.
Press MENU, navigate to DESCALE, press BREW to start.
Follow on-screen prompts to complete descaling cycle.
Rinse by running multiple water-only brew cycles until vinegar smell is gone.

Important: Descaling is essential for performance and warranty.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power/no water	Check power outlet; ensure plugged in; fill water reservoir.
Slow brewing/no coffee	Clogged needle/descaling needed	Clean exit needle; descale brewer; check water reservoir placement.
Coffee not hot enough	Settings/cold mug	Use STRONG brew setting; preheat mug with hot water.
Leaking water	Loose reservoir/overfilled	Ensure reservoir is seated properly; do not fill above MAX.
Descale light on	Mineral buildup	Perform descaling procedure.
Small cup size brewed	Brew size setting	Select larger brew size; reset brewer via MENU > Factory Reset.

Reset: Unplug for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com