Keurig K-Duo Plus 5200 Manual

The Keurig K-Duo Plus 5200 is a versatile single-serve and carafe coffee maker that brews both a K-Cup pod and a full 12-cup carafe. It features a 60oz removable water reservoir, programmable settings, a strength control option, a hot water on-demand function, an auto-off feature, and compatibility with both K-Cup pods and ground coffee. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brew Head, 60oz Removable Water Reservoir, 12-Cup Glass Carafe, K-Cup Pod Holder, Ground Coffee Filter Basket, Control Panel, Drip Tray.

Installation & Setup

Unpack and inspect all contents. Place on a clean, level, stable surface away from edges.

1. Remove all packaging materials and stickers from the brewer and carafe.
2. Wash the carafe, lid, and reusable filter basket with warm, soapy water. Rinse thoroughly.
3. Place the drip tray in position. Insert the water reservoir into the back of the brewer.
4. Fill the reservoir with fresh, cold water. Plug the power cord into a 120V outlet.

WARNING! Ensure the brewer is on a stable, heat-resistant surface. Keep away from water sources and do not immerse in liquid.

First-Time Use

Prime the brewer before first use to clear the internal lines of air and manufacturing residues.

1. Ensure the brewer is plugged in and the reservoir is filled.
2. Place a large mug (at least 10oz) on the drip tray. Do not insert a K-Cup pod.
3. Press the POWER button. Wait for the READY light to illuminate.
4. Select the 12oz brew size and press BREW. Discard the first full reservoir of water.
5. Repeat the priming process once more with fresh water.

CAUTION! The exterior surfaces may become hot during use. Use handles when moving the carafe.

Specifications

• Model: K-Duo Plus 5200.
• Brewing System: Single-Serve (K-Cup) & 12-Cup Carafe.
• Water Reservoir: 60 oz, removable.
• Power: 120V AC, 60Hz, 1470W.
• Dimensions (approx.): 13.4" H x 10.2" W x 15.1" D.
• Carafe Material: Glass with ergonomic handle and lid.
• Programmable Timer: Up to 24 hours in advance for carafe.
• Warranty: 1-Year Limited Warranty.
• Compatibility: Works with all Keurig-branded K-Cup pods.

Controls and Settings

Control Panel: POWER, STRENGTH, HOT WATER, PROGRAM, BREW, and brew size buttons (6oz, 8oz, 10oz, 12oz, CARAFE).

Indicator Lights: POWER (white), READY (green), ADD WATER (red), DESCALING (orange).

Single-Serve Mode: Use with K-Cup pod. Select brew size (6-12oz). Press BREW.
Carafe Mode: Use with ground coffee in filter basket. Select CARAFE button, then choose cup amount (2-12). Press BREW.
Strength Control: Press STRENGTH button before brewing carafe for bolder coffee.
Program: Press PROGRAM to set delayed brew time for carafe. Use +/- buttons to adjust.
Hot Water: Press HOT WATER button to dispense hot water without brewing coffee.

Brewing Modes

Brewing a K-Cup Pod (Single-Serve):

1. Lift and lower the brew handle to open the K-Cup holder.
2. Place a K-Cup pod in the holder. Close the handle firmly.
3. Place your mug on the drip tray.
4. Select your desired brew size (6, 8, 10, or 12oz).
5. Press the BREW button. The brew cycle will begin.

Brewing Ground Coffee (Carafe):

1. Remove the K-Cup pod holder and insert the reusable gold-tone filter basket.
2. Add desired amount of ground coffee (1 tbsp per cup recommended).
3. Place the empty carafe on the warming plate.
4. Select CARAFE, then use +/- to select cup amount (2-12).
5. Press STRENGTH for bold, if desired. Press BREW.

Using the Carafe

The glass carafe is designed for use only with the included warming plate.

1. Always use the lid when brewing and serving.
2. Do not place carafe on a stove top or direct heat source.
3. To pour, hold the carafe by the handle and press the lid release button with your thumb.
4. The warming plate will keep coffee hot for up to 2 hours after brewing.
5. For best flavor, serve coffee immediately and do not reheat in the carafe.

Tip: To avoid thermal shock, do not add cold liquid to a hot carafe or place a hot carafe on a cold surface.

Maintenance & Descaling

Regular cleaning ensures optimal performance and coffee flavor.

Daily: Empty and rinse the water reservoir. Wipe exterior with a damp cloth.
Weekly: Wash the carafe, lid, and reusable filter basket with warm, soapy water.
Monthly: Run a water-only brew cycle (without coffee) to flush the system.
Descaling: Required every 3-6 months or when DESCALE light illuminates.

1. Fill reservoir with 16oz white vinegar and 16oz water.
2. Place a large carafe or bowl on the drip tray.
3. Press POWER, then press and hold HOT WATER and 12oz buttons for 3 seconds to start descale mode.
4. Press BREW to start cycle. Repeat until ADD WATER light comes on.
5. Rinse thoroughly by brewing multiple cycles with fresh water only.

CAUTION! Use only Keurig descaling solution or white vinegar. Do not use harsh chemicals.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. UL Listed. Copyright © Keurig Green Mountain, Inc. Keurig, K-Duo, and K-Cup are trademarks of Keurig Green Mountain, Inc., registered in the U.S. and other countries. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug brewer for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com