Keurig K Compact Single Serve Manual

The Keurig K Compact is a single-serve coffee maker designed for home use, featuring a compact design, multiple brew sizes, a removable drip tray for travel mugs, a 48-ounce water reservoir, descaling alert, energy-saving auto-off, and compatibility with all Keurig K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Compact brewer, Removable 48oz water reservoir, Drip tray with adjustable height, Power button, Brew size buttons, Add Water indicator, Descaling reminder.

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

1. Remove packaging materials from inside and outside brewer.
2. Wash removable water reservoir with warm, soapy water; rinse thoroughly.
3. Place drip tray in position; adjust height if using travel mug.
4. Plug power cord into 120V AC outlet.

WARNING! Do not use if brewer is damaged. Keep away from water sources to prevent electric shock.

First-Time Use

Prime the brewer before first use to ensure optimal performance.

1. Fill water reservoir with fresh cold water; place back on brewer.
2. Press POWER button to turn on; brewer will heat up (approx. 3 minutes).
3. Without K-Cup pod, place mug on drip tray and press 10oz brew button to run water through system.
4. Repeat process 2-3 times to clear internal lines.
5. Brewer is now ready for use with K-Cup pods.

CAUTION! Water will be hot. Keep hands clear during brewing cycle.

Specifications

• Dimensions: 12.5" H x 9.8" W x 13.3" D.
• Weight: 6.5 lbs.
• Water Reservoir: 48oz removable.
• Brew Sizes: 6oz, 8oz, 10oz.
• Power: 120V AC, 60Hz, 1470W.
• Auto-Off: 2 hours.
• Compatibility: All Keurig K-Cup pods.
• Warranty: 1-year limited warranty.
• Color Options: Black, White, Stainless Steel.

Controls and Settings

Front Panel: POWER button, 6oz/8oz/10oz brew buttons, Add Water indicator, Descaling reminder light.

Operation: Press POWER to turn on; select brew size; press brew button to start. Add Water light illuminates when reservoir is low. Descaling light flashes when maintenance is required.

Settings: Auto-off cannot be disabled. Brew temperature is preset. Use only Keurig descaling solution for maintenance.

Brewing Coffee

Brews single servings using K-Cup pods.

1. Ensure brewer is on and heated (POWER light solid).
2. Lift handle, insert K-Cup pod, close handle firmly.
3. Place mug on drip tray (adjust height if needed).
4. Select desired brew size (6oz, 8oz, 10oz).
5. Press brew button; brewing completes in under a minute.
6. Lift handle to eject used pod into storage compartment.

Tip: For stronger coffee, use 6oz setting with regular K-Cup pod.

Maintenance & Cleaning

Regular cleaning ensures best performance and longevity.

1. Unplug brewer before cleaning.
2. Wash water reservoir, drip tray, and funnel weekly with warm, soapy water.
3. Wipe exterior with damp cloth; do not immerse in water.
4. Clean needle: Use paperclip to clear blockage if coffee grounds accumulate.
5. Empty used pod storage regularly.

CAUTION! Never use abrasive cleaners or scouring pads.

Descaling

Descaling removes mineral buildup; required when descaling light flashes.

1. Fill reservoir with 48oz water and one Keurig descaling solution packet.
2. Place large mug or bowl on drip tray.
3. Press POWER, then brew button without K-Cup pod to start descaling cycle.
4. Repeat until reservoir is empty, then rinse thoroughly.
5. Refill with fresh water and run multiple brew cycles without pod to rinse.
6. Descaling light will turn off when complete.

WARNING! Use only Keurig descaling solution; others may damage brewer.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com