Keurig K-Compact K35 Manual

The Keurig K-Compact K35 is a single-serve coffee maker designed for home use, featuring a 36-ounce removable water reservoir, multiple brew sizes (6, 8, 10 oz), an energy-saving auto-off function, a descale indicator, and compatibility with all Keurig K-Cup pods. It brews in under a minute and includes a drip tray for travel mugs. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Functions 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brewer with removable reservoir, Drip Tray, Power Cord, Water Filter Handle (optional), and Quick Start Guide.

Feature	Description
Removable Water Reservoir	36 oz capacity, easy to fill and clean
Brew Size Selection	Choose 6, 8, or 10 oz brew sizes
Energy-Saving Auto-Off	Turns off 90 seconds after last brew
Descale Indicator	Alerts when descaling is needed
K-Cup Pod Compatibility	Works with all Keurig K-Cup pods
Quick Brew Time	Brews a cup in under a minute
Removable Drip Tray	Accommodates travel mugs up to 7.2 inches
Power Button	Turns brewer on/off
Brew Button	Starts brewing cycle
Add Water Indicator	Lights when reservoir is low

Installation & Setup

Unpack and inspect all parts. Place on a clean, level, stable surface away from heat sources and water.

Remove packaging materials from inside and outside the brewer.
Wash the water reservoir with warm, soapy water, rinse thoroughly, and dry.
Insert the water filter (optional): Soak filter for 5 minutes, rinse, and place in filter holder.
Fill the reservoir with fresh, cold water and place it back on the brewer.
Plug the power cord into a 120V AC outlet.

WARNING! Do not use without water. Ensure the brewer is unplugged during cleaning.

First-Time Use

Prime the brewer before first use to ensure optimal performance.

Press the Power button to turn on the brewer. The Add Water light may illuminate.
Lift and close the brewer handle (without a K-Cup pod) to puncture the K-Cup holder.
Place a large mug (10 oz or more) on the drip tray.
Select the largest brew size (10 oz) and press the Brew button to run water through the system. Repeat 3 times.
The brewer is now ready for use.

CAUTION! Use only cold, fresh water. Do not use distilled or sparkling water.

Specifications

Dimensions: 12.5" H x 9.8" W x 13.4" D.
Weight: 6.5 lbs.
Water Reservoir: 36 oz removable.
Brew Sizes: 6, 8, 10 oz.
Power: 120V AC, 60Hz, 1470W.
Brew Time: Under 1 minute.
Auto-Off: 90 seconds after last brew.
Compatibility: All Keurig K-Cup pods.
Warranty: 1-year limited.

Controls and Functions

Front Panel: Power Button, Brew Button, 6/8/10 oz Brew Size Buttons, Add Water Indicator, Descaling Indicator.

Operation: Press Power to turn on. Select brew size (6, 8, or 10 oz). Lift handle, insert K-Cup pod, close handle, place mug, press Brew. The brewer heats water, pierces the pod, and brews coffee into your mug.

Auto-Off: Brewer turns off 90 seconds after last brew to save energy. Add Water Light: Illuminates when reservoir is empty or low. Descale Light: Flashes when mineral buildup requires descaling.

Brewing Coffee

Follow these steps for optimal coffee brewing.

Ensure the brewer is on and the Add Water light is off.
Lift the handle and insert a K-Cup pod into the K-Cup holder.
Close the handle firmly.
Place a mug on the drip tray.
Select your desired brew size (6, 8, or 10 oz).
Press the Brew button. Brewing begins and completes in under a minute.
After brewing, lift the handle to eject the used K-Cup pod.

Tip: For stronger coffee, use the smallest brew size (6 oz) with a dark roast pod.

Maintenance & Cleaning

Regular cleaning ensures best performance and longevity.

Exterior: Wipe with a damp cloth. Do not immerse in water.
Water Reservoir: Remove and wash with warm, soapy water weekly. Rinse thoroughly.
Drip Tray & K-Cup Holder: Remove and wash as needed.
Needle: Unplug brewer, lift handle, and use a paper clip to clear any coffee grounds from the exit needle.

CAUTION! Always unplug the brewer before cleaning. Never use abrasive cleaners.

Descaling

Descale every 3-6 months or when the Descaling Indicator flashes.

Purchase Keurig Descaling Solution or use a vinegar solution (1 part white vinegar to 3 parts water).
Fill the reservoir with descaling solution.
Place a large mug on the drip tray.
Press Power, then Brew (without a K-Cup) to run solution through the brewer. Repeat until reservoir is empty.
Rinse reservoir thoroughly, fill with fresh water, and run multiple brew cycles (without a K-Cup) to rinse the system.
The Descaling Indicator will turn off after descaling is complete.

WARNING! Descaling is essential to prevent mineral buildup and maintain heating performance.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. UL Listed: Meets safety standards. Copyright © Keurig Green Mountain, Inc. Keurig, K-Compact, and K-Cup are trademarks of Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Check power cord connection; ensure outlet is working.
No water flow	Empty reservoir/clog	Fill reservoir; check for clogs in needle; descale if needed.
Coffee is weak	Brew size/minerals	Use smaller brew size; descale brewer.
Brewer leaks	Misaligned reservoir	Ensure reservoir is properly seated; check for cracks.
Descaling light on	Mineral buildup	Descale the brewer following instructions.
K-Cup not punctured	Handle not closed	Ensure handle is fully closed; check for obstructions.

Reset: Unplug brewer for 2 minutes, then plug back in.

Service: 1-866-901-2739; www.keurig.com