Keurig K Cafe User Manual

The Keurig K Cafe is a premium single-serve coffee maker with built-in milk frother, designed to brew hot coffee, lattes, and cappuccinos. It features a 60 oz removable water reservoir, programmable strength control, auto-off functionality, descale indicator, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Using the Milk Frother 8. Cleaning and Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brew chamber, Milk frother with hot/cold settings, Removable water reservoir, Drip tray, Control panel with LCD display, Power button, Strength control, Latte/Cappuccino button.

Feature	Description
Built-in Milk Frother	Creates hot or cold froth for lattes and cappuccinos
Strength Control	Adjusts brew strength (Strong or Mild)
Removable Water Reservoir	60 oz capacity with handle for easy refilling
Programmable Auto-Off	Turns off automatically after 2 hours (default)
Descale Indicator	Alerts when descaling is needed
Brew Size Options	6, 8, 10, 12 oz coffee; 4, 6, 8, 10, 12 oz hot water
LCD Display	Shows settings, status, and prompts
Drip Tray	Removable and adjustable for tall mugs
K-Cup Pod Compatibility	Works with all K-Cup pod varieties
Latte/Cappuccino Button	One-touch operation for specialty drinks

Unpacking and Setup

Unpack and inspect contents. Place on clean, level, heat-resistant surface.

Remove all packaging materials and stickers.
Wash removable parts: Reservoir, drip tray, and frother lid in warm soapy water.
Place machine on counter away from edges, cabinets, and heat sources.
Fill water reservoir with fresh cold water and reattach.
Plug power cord into 120V AC outlet.

WARNING! Ensure proper ventilation; keep away from children. Do not use abrasive cleaners.

First-Time Use

Power on machine; follow priming steps.

Press POWER button; LCD will light up.
Prime the system: Place large mug on drip tray, select 12 oz brew without a K-Cup pod.
Repeat priming cycle 2-3 times until water runs clear.
Insert K-Cup pod, select desired brew size and strength.
For frother: Fill frother with milk up to MAX line, select hot or cold froth setting.

CAUTION! First brews may have slight odor; this is normal. Ensure mug is centered.

Specifications

Dimensions: 13.1" H x 10.2" W x 15.3" D.
Water Reservoir: 60 oz removable.
Power: 1500W, 120V AC, 60Hz.
Brew Sizes: 6, 8, 10, 12 oz coffee; 4-12 oz hot water.
Frother Capacity: Up to 8 oz milk.
Auto-Off: Programmable (2 hours default).
Weight: 9.5 lbs.
Warranty: 1-year limited.

Controls and Settings

Access settings via control panel buttons and LCD display.

Control Panel: POWER, STRENGTH, BREW SIZE, LATTE/CAPPUCCINO, HOT/COLD FROTH, MENU/SETTINGS.

Brew Settings: Strength (Strong/Mild), Brew size selection, Temperature adjustment (via MENU). Frother Settings: Hot froth (for lattes), Cold froth (for iced drinks). System Settings: Auto-off time (0.5, 1, 2, 3 hrs), Water filter reminder, Descaling mode, Factory reset.

Brewing Coffee

For coffee or hot water brewing.

Lift handle, insert K-Cup pod, close handle firmly.
Place mug on drip tray.
Select brew size (6, 8, 10, 12 oz).
Press STRENGTH for Strong brew if desired.
Press BREW button; brewing begins.
For hot water only: Do not insert pod, select size, press BREW.

Tip: Preheat mug with hot water for optimal temperature. Use filtered water for better taste.

Using the Milk Frother

Creates froth for lattes and cappuccinos.

Remove frother lid, pour cold milk up to MAX line (8 oz).
Replace lid, attach frother to machine.
Select HOT FROTH for lattes or COLD FROTH for iced drinks.
Press LATTE/CAPPUCCINO button; frothing begins.
When complete, pour frothed milk over brewed coffee.
Clean frother immediately after use.

WARNING! Do not overfill frother. Use whole or 2% milk for best froth. Never run frother without milk.

Cleaning and Maintenance

Daily: Wipe exterior with damp cloth. Weekly: Wash removable parts. Monthly: Descale as needed.

Unplug machine before cleaning.
Remove and wash reservoir, drip tray, frother in warm soapy water.
Wipe brew chamber with damp cloth.
Descale when indicator lights: Use Keurig descaling solution or vinegar mixture.
Run descale cycle per instructions.

CAUTION! Never immerse machine in water. Do not use harsh chemicals.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't power on	Power connection	Check outlet; ensure cord is plugged in firmly.
No water flow	Clogged needle/reservoir	Descale machine; check water reservoir is seated properly.
Weak or no coffee	K-Cup pod not punctured	Open and close handle firmly; ensure pod is inserted correctly.
Frother not working	Milk type/overfill	Use fresh cold milk; do not exceed MAX line; clean frother.
Leaking water	Loose parts	Ensure reservoir, drip tray, and frother are properly attached.
Descale light on	Mineral buildup	Run descaling cycle following manual instructions.

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com