Keurig K-Cafe K83 Manual

The Keurig K-Cafe K83 is a single-serve coffee and latte maker that brews coffee, espresso-style drinks, and froths milk for lattes and cappuccinos. It features a built-in milk frother, multiple brew sizes (6, 8, 10, 12 oz), a strong brew option, a descaling alert, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, cleaning, and troubleshooting.

Features at a Glance

Key components: Brewer with integrated milk frother, Removable drip tray, Water reservoir, K-Cup pod holder, Frother whisk, Control panel.

Feature	Description
Built-in Milk Frother	Froths cold milk for lattes and cappuccinos
Multiple Brew Sizes	6, 8, 10, and 12 oz coffee options
Strong Brew Button	Intensifies coffee flavor
Cafe Menu Button	Selects latte or cappuccino mode
Hot Water Button	Dispenses hot water for tea or cocoa
Descaling Alert	Indicates when descaling is needed
Removable Drip Tray	Accommodates travel mugs; easy to clean
Large Water Reservoir	60 oz capacity, removable for filling
Energy Saver Mode	Auto-off after 2 hours of inactivity
Compatibility	Works with all K-Cup pod varieties

Installation & Setup

Unpack and inspect contents. Place on a clean, level, and stable surface.

1. Remove all packaging materials and stickers from the brewer.
2. Wash the water reservoir, drip tray, and frother lid with warm, soapy water. Rinse and dry.
3. Place the drip tray in position. Insert the water reservoir firmly into the back of the brewer.
4. Plug the power cord into a 120V AC outlet. The brewer will beep and the power button will flash.

WARNING! Ensure the brewer is on a heat-resistant surface away from edges. Keep cord away from heated surfaces.

First-Time Use

Prime the system before first brew to remove any manufacturing residues.

1. Fill the water reservoir with fresh, cold water up to the MAX fill line.
2. Place a large mug (at least 12 oz) on the drip tray. Do not insert a K-Cup pod.
3. Press the POWER button. Wait for the "Add Water" light to turn off.
4. Lift and close the brewer handle to start the priming cycle. Hot water will dispense.
5. Discard this water. The brewer is now ready for use.

CAUTION! The exterior surfaces become hot during use. Do not touch hot surfaces. Use handles or knobs.

Specifications

• Model: K-Cafe K83 Single-Serve Coffee & Latte Maker.
• Power: 1500 Watts, 120V AC, 60Hz.
• Water Reservoir: 60 oz removable capacity.
• Brew Sizes: 6, 8, 10, 12 oz.
• Dimensions: Approximately 13.4" H x 10.2" W x 15.3" D.
• Weight: 9.5 lbs.
• Warranty: 1-Year Limited Warranty.
• Compatibility: All Keurig K-Cup pods.
• Frother Capacity: Holds up to 8 oz of cold milk.
• Operating Temp: 41°F - 95°F (5°C - 35°C).

Controls and Settings

Control Panel: POWER, STRONG, CAFE MENU (Latte/Cappuccino), HOT WATER, 6/8/10/12 oz brew size buttons.

Indicator Lights: Power, Add Water, Descaling, Frother Ready.

Brew Size Selection: Press the desired size button (6, 8, 10, 12 oz) before brewing. The selected button will light up. Strong Brew: Press STRONG button before brewing for a more intense coffee flavor (light will illuminate). Cafe Menu: Press to cycle between Latte and Cappuccino modes when using the frother. Hot Water: Dispenses hot water for tea, cocoa, or soup. Frother Control: Separate button on the frother unit starts/stops frothing.

Brewing Coffee

For brewing coffee, espresso-style drinks, or hot water.

1. Ensure the brewer is on and the "Add Water" light is off. Fill the water reservoir if needed.
2. Place a mug on the drip tray.
3. Lift the handle and insert any K-Cup pod. Close the handle firmly.
4. Select your brew size (6, 8, 10, or 12 oz). For stronger coffee, press STRONG.
5. Press the flashing brew button to start. Brewing will complete automatically.
6. To brew another cup, repeat steps 2-5. The brewer heats water between each brew.

Tip: For best results, use fresh, cold water and a clean mug. Rinse the pod holder periodically.

Making Lattes & Cappuccinos

Uses the integrated milk frother to create milk-based drinks.

1. Froth the Milk: Pour cold milk into the frother (fill line indicated). Attach the lid. Place the frother on its base. Press the FROTHER button. The frother will run for about 60 seconds. When finished, pour frothed milk into your mug.
2. Brew the Coffee: Place the mug with frothed milk on the drip tray. Insert an espresso or dark roast K-Cup pod. Press the CAFE MENU button until your desired drink (Latte or Cappuccino) is selected. Select a small brew size (6 or 8 oz is recommended). Press the brew button.
3. The coffee will brew directly into the mug with the frothed milk. Stir gently before drinking.

Note: For a cappuccino, use more foam. For a latte, use more steamed milk. Use whole milk for the creamiest foam.

Milk Frother Operation

Detailed steps for operating the frother.

1. Ensure the frother and its whisk are clean.
2. Fill with cold milk up to the MAX fill line (do not exceed). For cappuccino foam, fill to the lower line.
3. Securely attach the lid. Place the frother onto the brewer's frother base.
4. The "Frother Ready" light on the brewer will be solid. Press the FROTHER button on the frother unit.
5. The frother will run automatically, first heating then frothing the milk. It will shut off automatically.
6. Carefully remove the frother (it will be hot). Pour milk into your mug immediately.
7. Clean the frother immediately after use (see Care & Cleaning).

WARNING! The frother and milk become very hot. Do not touch during operation. Always use the handle.

Care & Cleaning

Regular cleaning ensures optimal performance and taste.

Daily: Wipe exterior with a damp cloth. Empty and rinse the drip tray and water reservoir. Rinse the frother lid and whisk after each use.

Weekly: Wash the removable parts (drip tray, reservoir, frother lid, K-Cup holder) in warm, soapy water. Rinse thoroughly.

Descaling: Perform every 3-6 months or when the DESCALE light illuminates. Use Keurig Descaling Solution or a vinegar solution as per instructions in the manual.

CAUTION! Unplug the brewer before cleaning. Never immerse the brewer base, cord, or frother base in water. Do not use abrasive cleaners.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. Copyright © Keurig Green Mountain, Inc. Keurig, K-Cafe, K-Cup are trademarks of Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact Keurig Customer Service at 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Check that the power cord is plugged in securely. Ensure the outlet is working.
No water flow / short cup	Clogged needle, air lock	Descale the brewer. Use a paperclip to clear the exit needle (see manual). Prime the system.
"Add Water" light is on	Low water	Fill the water reservoir to the MAX line and reinstall it properly.
Frother not working	Not assembled correctly, dirty	Ensure the lid is locked and the frother is seated on the base. Clean the frother whisk and interior.
Coffee is not hot enough	Cold mug, scale buildup	Preheat your mug with hot water. Descale the brewer.
Leaking water	Loose reservoir, overfilled frother	Ensure the water reservoir is clicked into place. Do not overfill the milk frother.

Reset: Unplug the brewer for 2 minutes, then plug it back in.

Service: 1-866-901-2739; www.keurig.com