Keurig Express Coffee Maker Manual

The Keurig Express Coffee Maker is a single-serve brewing system designed for quick and convenient coffee preparation. It features a compact design, K-Cup pod compatibility, multiple brew sizes, an auto-off function, a removable drip tray, a water reservoir, and a descaling alert. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brew chamber, Water reservoir, Drip tray, Power button, Brew size buttons, Display screen, K-Cup holder.

Feature	Description
Brew chamber	Holds K-Cup pod for brewing
Water reservoir	Removable tank for water supply
Drip tray	Removable tray to catch spills
Power button	Turns coffee maker on/off
Brew size buttons	Selects cup size (6oz, 8oz, 10oz)
Display screen	Shows status and alerts
K-Cup holder	Accepts Keurig-compatible pods
Auto-off	Turns off automatically after 2 hours
Descaling alert	Indicates when descaling is needed
Travel mug compatible	Accommodates mugs up to 7 inches tall

Installation & Setup

Unpack and inspect contents. Place on a clean, stable, level surface.

Remove all packaging materials from inside and outside the unit.
Wash the water reservoir and drip tray with warm, soapy water. Rinse and dry thoroughly.
Place the drip tray in position.
Fill the water reservoir with fresh, cold water and reattach it to the brewer.
Plug the power cord into a 120V AC outlet.

WARNING! Do not use the brewer without water in the reservoir. Keep away from heat sources and moisture.

First-Time Use

Prime the brewing system before first use.

Ensure the water reservoir is filled and properly seated.
Press the POWER button to turn on the brewer. The display will light up.
Without a K-Cup pod, place a mug on the drip tray.
Press and hold the 10oz brew button for 5 seconds to start a cleansing brew cycle. Discard the water.
Repeat the cleansing cycle two more times to ensure the system is ready.
The brewer is now ready for normal use.

CAUTION! The water and brewed beverage will be hot. Handle with care.

Specifications

Model: Keurig Express.
Brew Sizes: 6 oz, 8 oz, 10 oz.
Water Reservoir Capacity: 48 oz.
Power: 120V AC, 60Hz, 1470W.
Dimensions: 13.2" H x 9.8" W x 13.0" D.
Weight: 7.5 lbs.
Compatibility: Uses Keurig K-Cup pods.
Warranty: 1-year limited warranty.
Auto-off: 2 hours.

Controls and Settings

Front Panel: POWER button, 6oz/8oz/10oz brew buttons, Display screen.

Display Icons: Power On, Heating, Ready to Brew, Add Water, Descaling Alert.

Brew Size Selection: Press desired button (6oz, 8oz, 10oz) after adding a K-Cup. Auto-off: Brewer turns off automatically after 2 hours of inactivity. Descaling Alert: Flashing icon indicates need for descaling. Temperature Control: Pre-set optimal brewing temperature (192°F).

Brewing Coffee

Use only Keurig-approved K-Cup pods.

Press POWER to turn on. Wait for "Ready" light.
Lift the handle to open the brew chamber.
Insert a K-Cup pod. Close the handle firmly.
Place a mug (at least 6oz capacity) on the drip tray.
Press the desired brew size button (6oz, 8oz, 10oz). Brewing begins.
The brew cycle completes automatically. Remove mug.
To brew another cup, repeat steps 2-6.

Tip: For stronger coffee, use the 6oz setting with a dark roast pod.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and longevity.

Daily: Wipe exterior with a damp cloth. Empty and rinse the drip tray.
Weekly: Remove and wash the water reservoir and drip tray in warm, soapy water. Rinse thoroughly.
Monthly: Clean the brew needle. Unplug brewer. Use a paperclip to gently clear any blockage in the upper and lower needles.
As needed: Descale when the alert icon flashes (see Descaling Procedure).

CAUTION! Unplug before cleaning. Do not immerse brewer in water.

Descaling Procedure

Descale every 3-6 months or when alert activates.

Purchase Keurig Descaling Solution or use a vinegar-water mix (50/50).
Fill the water reservoir with the descaling solution.
Place a large mug on the drip tray.
Press POWER, then press and hold the 6oz and 10oz buttons for 3 seconds to enter descale mode.
Press the 10oz button to start the descaling cycle. Discard the solution from the mug.
Refill the reservoir with fresh water. Run multiple 10oz brew cycles (without a K-Cup) until the reservoir is empty to rinse.
The descaling alert will turn off. The brewer is ready for use.

WARNING! Follow solution instructions carefully. Rinse thoroughly to remove all residue.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed. Copyright © 2025 Keurig; trademarks of Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	No power	Ensure plug is secure in outlet; check circuit breaker.
No water flow	Clogged needle/reservoir	Clean brew needles; ensure reservoir is seated properly and filled.
Weak or small brew	Mineral buildup	Descale the brewer following procedure.
Leaking water	Loose parts	Check reservoir and drip tray are correctly installed; ensure K-Cup is properly seated.
Descaling alert on	Mineral buildup	Perform descaling procedure.
Coffee not hot enough	Pre-heat needed	Run a water-only brew cycle before brewing coffee to pre-heat the system.

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-866-901-2739; www.keurig.com